Help Guide (Web manual)

Only 2ch PCM signals are output to Zone 2.

Digital audio stream signals such as DSD and Dolby Digital are not output to Zone 2.

Multi-channel stream signals are automatically converted to 2 channels signals, and then output to Zone 2 if

the same source signals as the main zone are selected in Zone 2.

Input

name

Input source

SOURCE

Signals from the current input in main zone

BD/DVD

Source signal from the HDMI IN 1 (BD/DVD) jack

Source signal from the DIGITAL COAXIAL IN (BD/DVD) jack (*2)

Source signal from the COMPONENT VIDEO IN 1 (BD/DVD) jacks (*3)

SAT/CATV

Source signal from the HDMI IN 2 (SAT/CATV) jack

GAME

Source signal from the HDMI IN 6 (GAME) jack (for STR-ZA3100ES/STR-ZA2100ES) on the

front panel or HDMI IN 3 (GAME) jack (for STR-ZA1100ES)

STB

Source signal from the HDMI IN 3 (STB) jack (for STR-ZA3100ES/STR-ZA2100ES) or HDMI

IN 4 (STB) jack (for STR-ZA1100ES)

VIDEO

Source signal from the HDMI IN 4 (VIDEO) jack (for STR-ZA3100ES/STR-ZA2100ES only)

Source signal from the COMPONENT VIDEO IN 2 (VIDEO) jacks (*3)

Source signal from the VIDEO IN VIDEO jack (*3)

Source signal from the VIDEO AUDIO IN jacks

AUX

Source signal from the DIGITAL OPTICAL IN 1 (AUX) jack (*2)

Source signal from the VIDEO IN AUX jack (*3)

Source signal from the AUX AUDIO IN jacks

Source signal from the DIGITAL OPTICAL IN 2 (TV) jack (*2)

Source signal from the TV AUDIO IN jacks

SA-

CD/CD

Source signal from the HDMI IN 5 (SA-CD/CD) jack

Source signal from the SA-CD/CD AUDIO IN jacks

TUNER

FM broadcast received through the built-in tuner

TUNER

AM broadcast received through the built-in tuner

The following restrictions are set on the digital audio signals input from the coaxial and optical input jacks on the receiver:

If the digital audio signals input from the coaxial and optical input jacks on the receiver are not output to Zone 2, set the audio output

to 2ch PCM on the connected device. For details, refer to the operating instructions of the connected device.

The receiver cannot output a different analog signal to the HDMI OUT B (ZONE 2) jack while an analog signal of the main zone is

being output from the HDMI OUT A jack.