Help Guide (Web manual)

Note

When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 2 or Zone 3, the item most

recently selected will be set.

If you change the sound field or speaker settings in the main zone while the input for Zone 2 is set to [SOURCE] or the

same input is selected in the main zone and Zone 2, the sound may also be momentarily interrupted in Zone 2.

Input sources which can be output to Zone 3

The following input sources can be output to Zone 3.

You cannot watch video in Zone 3.

Note

When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 3, the item most recently

selected will be set.

[73] Using the Multi-Zone Features Enjoying sound from speakers located in another room (Zone 2)

Connecting 5.1-channel speaker system with Zone 2

connection

Connect each speaker as illustrated below.

Before connecting cables, be sure to disconnect the AC power cord (mains lead).

For details on how to connect speaker cables to the receiver, see “

How to connect speaker cables.”

Input name Input source

SOURCE

Analog audio signals from the current input in main zone

VIDEO

Source signal from the VIDEO AUDIO IN jacks

AUX

Source signal from the AUX AUDIO IN jacks

Source signal from the TV AUDIO IN jacks

SA-CD/CD

Source signal from the SA-CD/CD AUDIO IN jacks

FM TUNER

FM broadcast received through the built-in tuner

AM TUNER

AM broadcast received through the built-in tuner