Help Guide (Web manual)

Monaural audio cable (not supplied)

Speaker cable (not supplied)

After you have made the Zone 2 speaker connection, set [SB Speaker Assign] to [Zone2] in the [Speaker Setup]

menu.

Note

After you have installed and connected your speakers, set the speaker pattern to [5.1] using [Speaker Pattern] in the

[Speaker Setup] menu.

You can only set [SB Speaker Assign] if a speaker pattern in which speakers are not connected to the SPEAKERS

SURROUND BACK/HEIGHT(FRONT B/BI-AMP/ZONE 2) terminals is selected.

Connect speaker cables properly with the polarities (+/–) matched between the speaker cables and the SPEAKERS

terminals.

[74] Using the Multi-Zone Features Enjoying sound from speakers located in another room (Zone 2)

Assigning the speakers for Zone 2

You can assign the speakers installed in Zone 2 as Zone 2 speakers. Follow the procedure below after connecting

the speakers installed in Zone 2 to the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2)

terminals of the receiver.

Select [Setup] - [Speaker Setup] from the home menu.

Select [Speaker Pattern].