Help Guide (Web manual)

Note

You can only configure this setting when [HDMI Out B Mode] is set to [Zone2].

When a video device (projector, etc.) is connected to the HDMI OUT B (ZONE 2) jack, sound may not be output from the

receiver. In this case, set [Zone2 Audio Out] to [AMP].

When a TV which does not support audio content protection is connected to the HDMI OUT B (ZONE 2) jack, specific

audio may not be output from the receiver. In this case, set [Zone2 Audio Out] to [AMP].

When [Zone2 Audio Out] is set to [Zone2 TV + AMP] or [AMP], audio signals will be downmixed. The following

restrictions apply to downmixing.

If you change the sound field or speaker settings in the main zone while the input for Zone 2 is set to SOURCE or the

same input is selected in the main zone and Zone 2, the sound may also be momentarily interrupted in Zone 2.

The D.L.L. function does not work in the main zone.

The volume level of sound from the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2) terminals and

the HDMI OUT B (ZONE 2) jack may be different from sound that is not downmixed.

No sound will be output to Zone 2 if you play a DTS-CD with different HDMI inputs selected in the main zone and Zone

You cannot remedy the time gap between video output on the TV connected to the HDMI OUT B (ZONE 2) jack and

audio output from the speaker connected to the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2)

terminals using the A/V Sync function.

[79] Using the Multi-Zone Features Enjoying sound from speakers located in other rooms using another

amplifier

Setting the priority for the main zone (Priority)

Lets you set the priority when you select the same input for both the main zone and Zone 2.

Sound is output from the TV speakers and the speakers connected to the receiver.

Zone2 AMP: Recommended setting when another amplifier is connected to the HDMI OUT B (ZONE 2)

jack.

Sound is output from the another amplifier connected to the HDMI OUT B (ZONE 2) jack.

Sound is not output from the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2)

terminals and the ZONE 2 AUDIO OUT jacks.

Select [Setup] - [HDMI Setup] from the home menu.

Set [Priority].

Main & Zone2: You can enjoy the same input in the main zone and Zone 2. However, there may be

some interference in the audio and video signals in the main zone and Zone 2.

Main Only: You can enjoy good audio and video quality in the main zone. There is no output in Zone