User Manual

59
GB
Additional Information
 Do not place the receiver near heat sources,
or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
 Do not place anything on top of the cabinet
that might block the ventilation holes and
cause malfunctions.
 Do not place the receiver near device such
as a TV, VCR, or tape deck. (If the receiver is
being used in combination with a TV, VCR,
or tape deck, and is placed too close to that
device, noise may result, and picture quality
may suffer. This is especially likely when
using an indoor antenna (aerial).)
 Use caution when placing the receiver on
surfaces that have been specially treated
(with wax, oil, polish, etc.) as staining or
discoloration of the surface may result.
On operation
Before connecting other device, be sure to
turn off and unplug the receiver.
On cleaning
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.
Supported BLUETOOTH version
and profiles
Profile refers to a standard set of functions for
various BLUETOOTH product features. See
“BLUETOOTH section” in “Specifications”
(page 62) for the BLUETOOTH version and
profiles supported by this receiver.
Effective communication range
BLUETOOTH devices should be used within
approximately 10 meters (33 feet)
(unobstructed distance) of each other. The
effective communication range may become
shorter under the following conditions.
 When a person, metal object, wall or other
obstruction is between the devices with a
BLUETOOTH connection
 Locations where a wireless LAN is installed
 Around microwave ovens that are in use
 Locations where other electromagnetic
waves are generated
Effects of other devices
BLUETOOTH devices and wireless LAN
(IEEE 802.11b/g/n) device use the same
frequency band (2.4 GHz). When using your
BLUETOOTH device near a device with
wireless LAN capability, electromagnetic
interference may occur. This could result in
lower data transfer rates, noise, or inability to
connect. If this happens, try the following
remedies:
 Use this receiver at least 10 meters (33 feet)
away from the wireless LAN device.
 Turn off the power to the wireless LAN
device when using your BLUETOOTH device
within 10 meters (33 feet).
 Install this receiver and BLUETOOTH device
as closer to each other as possible.
Effects on other devices
The radio waves broadcast by this receiver
may interfere with the operation of some
medical devices. Since this interference may
result in malfunction, always turn off the
power on this receiver and BLUETOOTH
device in the following locations:
 In hospitals, on trains, in airplanes, at gas
stations, and any place where flammable
gasses may be present
 Near automatic doors or fire alarms
This receiver supports security functions that
comply with the BLUETOOTH specification to
ensure secure connection during communication
using BLUETOOTH technology. However, this
security may be insufficient depending on the
setting contents and other factors, so always be
careful when performing communication using
BLUETOOTH technology.
Sony shall not be held liable in any way for
damages or other loss resulting from information
leaks during communication using BLUETOOTH
technology.
BLUETOOTH communication is not necessarily
guaranteed with all BLUETOOTH devices that have
the same profile as this receiver.
On BLUETOOTH communication
Note