Owner's Manual

13
GB
Indicators on the display panel
UPDATE
Lights up when new software is available.
D.C.A.C.
Lights up when the measurement results of the
Auto Calibration (D.C.A.C. EX) function are
applied.
S.OPT.
Lights up when the Sound Optimizer function is
activated.
A.P.M.
Lights up when the A.P.M. (Automatic Phase
Matching) function is activated. You can only
set the A.P.M. function in the D.C.A.C. function.
D.R.C.
Lights up when dynamic range compression is
activated.
D.L.L.
Lights up when the D.L.L. (Digital Legato Linear)
function is activated.
EQ
Lights up when the equalizer is activated.
ZONE2, ZONE H
“ZONE2” lights up when the power for Zone 2 is
on.
“ZONE H” lights up when the power for HDMI
zone is on.
ST
Lights up when the receiver tunes to a FM
stereo broadcast.
HDMI OUT A + B
Indicates the HDMI OUT jacks that currently
output the audio/video signals.
SLEEP
Lights up when the sleep timer is activated.
Speaker system indicator (page 41)
Neural:X
Lights up when DTS Neural:X decoding is
activated.
Surr
Lights up when Dolby Surround decoding is
activated.
These indicators may not light up depending on
the speaker pattern setting.
DSD Native
Lights up when DSD native playback function is
activated.
IN-CEILING
Lights up when the In-Ceiling Speaker Mode is
activated.
BLUETOOTH indicator
“BT” lights up when a BLUETOOTH device is
connected. Flashes while connecting.
“BT TX” lights up when an Audio-Visual device
connected to the receiver sends audio to the
BLUETOOTH headphones/speakers.
Wireless LAN signal strength indicator
Show the strength of the wireless LAN signal.
No signal
Weak
Moderate
Strong
Wired LAN indicator
Lights up when a LAN cable is connected.
Input indicator
Lights up to indicate the current input.
HDMI
Digital signals are input through the selected
HDMI jack.
ARC
TV input is selected and Audio Return Channel
(ARC) signals are detected.
COAX
Digital signals are input through the COAXIAL
jack.
OPT
Digital signals are input through the OPTICAL
jack.
Note