User guide SmartBand 2 (for iOS) SWR12
Contents Basics............................................................................................. 3 Introduction.......................................................................................3 Hardware overview........................................................................... 3 Charging your SmartBand 2............................................................. 4 Assembly...........................................................................................
Basics Introduction Your SmartBand 2 is a companion product that connects wirelessly via Bluetooth® with your iPhone. Worn on your dominant wrist, it can monitor your body movements and interact with your iPhone to generate data about your daily life and habits. For example, the SmartBand 2 counts your steps and records data about your physical state while you walk or run. Your SmartBand 2 is a device you can wear everyday and features a sensor that monitors your pulse and helps determine your heart rate.
Charging your SmartBand 2 Before using your SmartBand 2 for the first time, you need to charge it for approximately 30 minutes. Sony chargers are recommended. Your SmartBand 2 turns off automatically when the charger is connected. You cannot turn on the device while a charger is connected. To charge your SmartBand 2 1 2 3 Plug one end of the USB cable into the charger or into the USB port of a computer. Plug the other end of the cable into the Micro USB port of your SmartBand 2.
To assemble your SmartBand 2 • Insert the core into the wristband in such a way that the power key is inserted underneath the power key cover. Wearing your SmartBand 2 You should wear the SmartBand 2 on your dominant hand and position the device on your wrist two fingers above the wrist bone. Wear your SmartBand 2 on your wrist snugly but comfortably, neither too tight nor too loose. In order for the SmartBand 2 to monitor your pulse, it should stay in place on your wrist.
Turning on and off To turn on the SmartBand 2 • Press and hold down the power key until your SmartBand 2 vibrates. All notification lights turn on one by one and then turn off. When turning on your SmartBand 2 for the first time, it automatically enters pairing mode and notification light A flashes until your SmartBand 2 is connected to a device. • To turn off the SmartBand 2 Press and hold down the power key until your SmartBand 2 vibrates.
Setting up your SmartBand 2 Preparing to use your SmartBand 2 For your SmartBand 2 to work properly, you must install the latest version of the SmartBand 2 application on your iPhone, and then pair and connect your SmartBand 2 device with your iPhone using Bluetooth®. To set up your SmartBand 2 using Bluetooth® 1 2 3 Make sure that your SmartBand 2 device is fully charged and turned on. On your iPhone, make sure that you have installed and updated the SmartBand 2 application to the latest version.
Using your SmartBand 2 Using the SmartBand 2 application You can view and change settings for your SmartBand 2 by using the SmartBand 2 application on your iPhone. You can also view your current pulse, stress and physical activities, such as steps, from the SmartBand 2 application. Getting notified You can set your SmartBand 2 to vibrate when you get an incoming call or a notification from your iPhone. All notifications on a connected iPhone can be forwarded to your SmartBand 2.
rate sensor is stored for up to 72 hours and synced to your iPhone once connected via Bluetooth. This product is intended to help you track your exercise and lifestyle. It is not a medical device and data from it should never be used to make medical decisions (like preventing, diagnosing, monitoring, or treating a disease or injury) or replace the advice of a medical professional. Sony Mobile disclaims any warranty that this device could be used or suitable for medical purposes.
• • Movement: rhythmic movements such as running or cycling give better results from the heart rate sensor compared with irregular movements like in tennis or boxing. Skin pigmentation variations: permanent or temporary changes to your skin, such as some tattoos. The ink, pattern, and saturation of some tattoos can block light from the sensor, making it difficult to get reliable results.
To turn on/off STAMINA mode 1 2 On your iPhone, open SmartBand 2, then tap SmartBand 2. Tap Stamina mode, then drag the slider beside Stamina mode to the on position. You can apply Stamina mode automatically by selecting the Low battery mode. Smart wake up alarms You can set one or several Smart wake up alarms in the SmartBand 2 application. The Smart wake up alarm wakes you up at the best time based on your sleep cycle. The alarm notifies you with a continuous vibration.
Out-of-range alert notifications You can receive a notification when you leave your iPhone behind by turning on the Out-of-range alert notification. Your SmartBand 2 then notifies you with three short vibrations when the distance between your SmartBand 2 and the connected iPhone becomes too great and causes a disconnection. This function is turned off by default. To turn on the Out-of-range alert notification function 1 2 On your iPhone, open SmartBand 2, then tap SmartBand 2.
1 2 3 4 Make sure that your SmartBand 2 is connected to your iPhone. Briefly press the power key on your SmartBand 2 and tap it immediately. The three notification lights flash blue. To play or pause the music file, tap the SmartBand 2 once. To go to the next music file, tap twice. To go to the previous music file, tap three times. To end remote control, briefly press the power key or wait for 10 seconds without tapping the SmartBand 2. The three blue notification lights turn off.
Important information Using your SmartBand 2 in wet and dusty conditions Your SmartBand 2 is waterproof and protected against dust, so don’t worry if you get caught in the rain or want to wash off dirt after wearing it for a period of time. But remember that the SmartBand 2 is only protected in fresh and chlorinated water up to 3m for a maximum of 30 minutes. Rinse the SmartBand 2 with fresh water under a faucet and dry the device completely after swimming.
Declaration of Conformity for SWR12 Hereby, Sony Mobile declares that the equipment type RD-0071 is in compliance with Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http:// www.compliance.sony.de/ С настоящото Sony Mobile декларира, че радиосъоръжение тип RD-0071 е в съответствие с Директива; 2014/53/EC. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: http:// www.compliance.sony.
Il-Kumpanija Sony Mobile tiddikjara li t-tagħmir tar-radju tat tip RD-0071 huwa konformi mad-Direttiva; 2014/53/EU. It-test sħiħ tad-dikjarazzjoni ta’ konformita tal-UE huwa disponibbli f’dan l-indirizz tal-Internet li ġej: http:// www.compliance.sony.de/ Herved erklarer Sony Mobile at radioutstyr typen RD-0071 er i samsvar med direktiv; 2014/53/EU. EU-erklaring fulltekst finner du pa Internett under: http:// www.compliance.sony.
Para consultar la información relacionada al número del certificado, refiérase a la etiqueta del empaque y/o del producto. Alimentación: 3,7 Vcc Industry Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.