Home Theatre System Operating Instructions TAV-L1

Using the Lift Unit/Front Panel Display
69
US
(LIFT MODE)
The lift unit moves up and down by pressing on
the system or remote. The lift unit can also be moved
automatically, according to the selected input, disc
type, or system power on/off when you select
“AUTO” in “LIFT MODE.”
1 Press DVD (FUNCTION) to switch the
remote FUNCTION to DVD.
2 Press AMP MENU.
3 Press M/m repeatedly until “LIFT MODE”
appears in the front panel display, then
press (ENTER) or ,.
4 Press M/m to select the desired lift mode,
then press (ENTER).
• “AUTO”: Lift unit can be set to move
automatically according to the selected input, a
disc type, or when the system is turned on/off.
Also you can move it by pressing .
• “MANUAL”: Lift unit is moved by pressing
.
• “LOCK”: Lift unit will not move, even if you
press .
The setting is selected and setup is complete.
Notes
• If you change the lift mode setting, change it while the lift
unit is not moving.
• The lift unit has a sensor in its top and bottom. If the sensor
detects an obstacle, it stops moving. If this occurs, remove
any obstacles, press POWER, and then press . The lift
unit starts moving again.
• When headphones are connected, the lift unit does not
move. And will not move even if you press until you
disconnect the headphones.
• When connecting other components to the system, make
sure not to trap any cords in the lift unit.
Moving the lift unit automatically (AUTO)
The lift unit can be moved automatically, according to
the selected input or system power on/off. See the
table below.
*1 CD and Super Audio CD
*2 DVD VIDEO/DVD-R/DVD-RW/VIDEO CD and DATA
CD/DATA DVD
Tip
Even in AUTO mode, you can move the lift unit up and down
by pressing . The lift unit moves in the same way with
the MANUAL mode.
Notes
• The lift unit will automatically move when the system is
activated with “AUTO” set in “LIFT MODE,” and [Off]
in sleep timer.
• It may take some time to detect a disc type.
Moving the lift unit manually (MANUAL)
The lift unit can be moved manually by pressing
on the system or remote. The lift unit moves up or
down accordingly. See the table below.
Note
When the lift unit is completely up, you cannot use OSD-
related functions, and “Not in Use” appears in the front panel
display. In this case, press to move the lift unit down.
Locking the lift unit (LOCK)
The lift unit will not move, even if you press . It is
recommended setting this mode if you have small
children.
Using the lift function
AMP MENU
M/m/,/ (ENTER)
With cover opened.
DVD
Status: Direction
System is off up
DVD function, disc type
CD
*1
up
DVD function, disc type
DVD
*2
down
FM function up
Except DVD/FM function down
Status:
Press to move
completely down up
moving up down
completely up down
moving down up
Continued