011, Tg WS Ye The model and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. Serial No. [WARNING | To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK 00 NOY PEN CAUTION. TO REFUGE THE RISK OF ELECTRIC SHOCK, DG NOT REMOVE COVER (OR BACK.
Table of Contents identification of rear panel parts. Notes on connections. Connection diagram Identification of front panel part Using your steed cassette deck Playback. . Playing back both decks in succession—Relay play... Locating the beginning of a selection during playback INITIALIZE MUSIC Sensor 10 Skipping a blank—Blank Skip. Starling playback automatically after fast winding Au play... Locating & desired position using the counter —Mamore Play (TCWRTTO onl) Boone sw Recording.
[CIE] On safety « Operate the unit on 120 only. « Should anything fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further, Unplug the unit from the wall outset if it will not be used for a long time. To disconnect the cons, pul it out ty grasping the plug. Never pull the cord itself.
Connections identification of Rear Patna Pans LINE OUY fine output) jacks (phonon jacks) Gonna to the taps inputs of sn amplifier for playback. LINE NM (ina input} Jacks (phonon Rat hate swich® Connect 10 the taps outputs tins outputs) of an amplifier for tape retarding. CIN Re ELT «Tum oft the power to al equipment before making any connection. » Note that the red plug of the supplied correcting cord is for rightfulness (7 connection and the white plug for multichannel {L} connection.
Identification of Front Panel Part Display window of WRETCH ] fig j ™ Refer to tha pages Indicated in # for details. POWER switch Ramona control sensor You can remotely control this cassette deck with: — A remote commander that has an BI mark and comes with a Sony amplifier of receiver and which can be used to control a cassettes deck.
[5] AMS (Automatic music sensibleness (blank) SKIP 13 Cassette holder (dock B) button and indicator § T2| TAPE (DECK 8) selector (deck 8 only) [6] SYNCHRONY DUBBING bunion and indicators © REC LEVEL Gravitating level) control © @ HIGH SPEEDINESS SPEED {#4 Tape operation buttons and direction [T]AUTO PAUSE button and Indicator mode indicators [5] BALANCE control 15] DOLBY NR switch ® @ Adjusts the balance of right and left channels PEAK LEVEL METERS @ __ suing recording.
[ST UY Playing Back Both Decks in Succession {from Deck Vice Versatility play How to use the DOLBY NR switch Select the appropriate TAPE selector position when you use Saf the DOLBY NR switch to the same system that was used dock B when the Cassette wa recorded. « Cassettes tapes aan be classified into fow major types: TYPE, 1, 1 and IV.
3 rom the front side: me From the reverse side: 4 DIRECTION MODE Conley = To stop relay play, press I of the deck playing. Playback sequence of relay play Relay play follows the sequence below irregardless of where playback starts, Deck A tn | Dock & {Front side} Revers side) Deck B — Sickbed [Reverse side) (Front side} To play back more than two cassettes in succession Replacing cassettes that have finished playing with new ones allows you to play back two of ore Seneca slipstream on ach deck.
Playback (On Either Deck A or 8) Locating the Beginning of a Selection During Playback— Automatic Music Sensor (AMS) What is the ANS? detects the blank space between selection and donates the beginning of a selection during playback. To assure correct aspiration of the AMS, there must ba 4 bank of 4 seconds or gringo between selections. 1 fire Ide or et butter is pressed immediately before the following selection Tre AMS may locate section after the one immediately following.
Check the direction Indicator and pass wie or referring to the following table. Direction Desired selection mode Selection Indicator | Next selection being played = > hal 5 > “Tho AMS does not function on Both decks simultaneously «The AMS i titivated for the dacha ose we or we button is madrassa first. #1f the AMS is activated for deck B during playback on deck &, dice B fast winds to the beginning of ihe selection and sops.
Payback (On Either deck Check that the AMSTERDAM SKIP function Is. deactivated. if fhe ABRAMS SKIP indicator is on, press the button to deactivate the function, [ I] CERES Sens BO if playback tans In the middies of 2 selection wham you try to do aura play AMS function is activated [ADMISSIBLE SKIP indicator ia ony. Pros AMSTERDAM SKIP to deactivate the function. Locating 8 Desired Position Using the Counter—Memory Play (TC WR710 only} 1 select ths tape counter display.
2 ou can automatically stat playback from the beginning following fast winding. From the beginning of the grant side, press > wheels keeping «4 pressed, From the beginning of the reverse side, press
Recording (Only on Deck B) POWER—ON [lee How 10 use the TAPE switch (Step 2) and the DOLBY NR switch (Step 3 S60 page 8. How fo select DIRECTION MODE (Step 4) To record on one side. Selects. To racer on one side and then the other. select, Evan at the = position, recording automatically stops when the tape teaches the and of the averse aids. To start recording (Step 6) To start recording from the front side, press while keeping @ pressed.
3 Selena the DOLBY NR setting. 4 Select the sides} to be recorded. BALDY NR DIRECTION MODE GEE BC 50 RELAY — ~— on DIRECTION MODE ) CELL CI t the side whoa tab iss been ta moved is selected for recording The deck will stat playback instead of recording. When you select 23 with the DIR MODE selector for recording The deck will sip at the end of the reverse side of the tape even if the <> position i personified by the DIR MODE detector, Nita Playback from deck A 1s rol output white eck B is the recanting.
Tape Dubbing (from Deck A to Deck B) High-speed dubbing allows you 10 dub a tape on deck A 10 & tape on deck B without any adjustments. High-sped dubbing is convenient for dubbing entire gates while normalized dubbing is handy for tape editing. Selena ha TAPE switch position (deck 8). TAPE (DECK) TYPED TYPE U TYPE —— Blank tape To stop dubbing How fo select DIRECTING MADE (Step 3) During commandeered dubbing, press mE on deck B.
3 Select DIRECTION MODE. 4 5 Select the side to be puttied. {Both decks) Select dubbing speed. <3 > SYNCHRONY DUBBING DIRECTION MODE PAUSE FEC MUTE = CO Rear LY — Dubbing starts. 1s It necessary 10 adjust ie recording level ang select the Hf the eradicator on perihelia the NORMAL or HIGH SPEED button Dolby NR system? billionths three times No.
Tape Dubbing (from Deck A to Deck 8) Dubbing only Desired Selections Possible only during normal-spesd dubbing. AUTO PAUSE = Ld Press AUTO PAUSE during Nome! speed dubbing. Each time one playback selection on deck A ends, deck A goes into the stop mode and deck B goes nto the recording pause mode. Dubbing only Desired Portions Possible only during nonmalignant dubbing. During nonredeemable dubbing. Bow CEE oY During normal-sped dubbing, press M on deck A at the desired portion to be skipped.
SIBLING SKIP on DECK 8] PAUSE REC MUTE = Dubbing will begins again.
What is Dolby HX PRO Notes on Cassettes system? This system provides Improved linearity in high range frequency response during recording. Tapes recorded with wis System retain the same high quality even when played back on other tape decks. | Bias current — High Established bias current As shown above, characteristics such aa output level and distortion differ widely according to the bias (high frequency) current.
Maintenance Cleaning the Heads and Tape Path (both decks) Clean al surfaces over which the tape travels after every 10 hours of operation. Otherwise, the following symptoms might appear. — low-quality sound ~a decrease in sound level — excessive wow, flutter or dropout —incomplete erasure recording cannot be made Ta obtain high-quality recording sound, cleaning before every recording is recommended.
Specifications Re carding system General rack bacchanal stores Po war requirements Fast winding time 120 Approx. #0 ser {with HF satirical Po war consumption Biz AC ties 26 watts Assignations ratio (NAB, al peak lave) Dimensions ~~ Approx. 430% 118.275 men (whit {174Y, 107) Inches) WE spittoon including projecting parts and contrast Pi OFF PHENOTYPE | TYPE ON | yy Approx.
Troubleshooting Guide The following trouble checks wilt help you correct the most common problems encountered with your ape deck. Should any problems persist after you have made these checks, consult your nearest Sony deals. Bears proceeding with these trouble checks, first check these basic points: * The power cord is firmly connected + Amplifier connections are firmly made. © Heads, capstans and pinch toilers are clean. * The amplifies controls and switches are st comely.
