User Guide

Troubleshooting
13
When the front cover is opened
When the top and inner covers are opened
2 Close the opened cover firmly.
The following message appears on the LCD.
Wait until the message disappears.
When the unit enters standby status, the following
message appears.
When REMOVE FILM TRAY: J7 appears
1 Remove the film tray completely.
2 Remove the jammed film near the inside of the unit.
3 Re-insert the film tray as it was.
When REMOVE FILM SOME PLACES: J8
Several film sheets have jammed. Open all of the covers,
rear, front, top and inner covers and check the location
of the jammed film.
Since there may be a film sheet jammed around the film
tray, pull the film tray out and check for the jammed
films.