User's Manual

8
Attaching Accessories
Connecting the conversion cable to the
OUTPUT connector
Attaching a belt clip
To remove a belt clip
Attaching the shoe mount adapter
Attach the belt clip before attaching the shoe mount
adapter.
Attach belt clips upside-down if planning to attach the
shoe mount adapter.
If attaching a camcorder, bend the unit’s antenna down so
that the antenna is not reflected on the display.
To remove the shoe mount adapter
Example: XLR-BMP conversion output cable
For a secure connection, turn to lock the
connector.
Insert one end of
the belt clip into
one of two holes
on either side of
the unit, and
then insert the
other end into
the hole on the
other side.
Insert a pointed object, such as
a ball-point pen, between the
belt clip and the unit, and pry
the end of the belt clip from the
hole on the side of the unit.
Note
Note
Push the bottom of the belt clip to make some space
between the belt clip and the unit (1), align the belt clip with
the two vertical grooves on the shoe mount adapter, and
insert the adapter in the direction of the arrow (2). Push the
shoe mount adapter in fully until the belt clip fits into the
horizontal groove on the adapter holds.
Push and hold the part labeled “PUSH” on the shoe mount
adapter 1, and disengage the horizontal part of the belt clip
from the horizontal groove on the shoe mount adapter (2).
Then, push the shoe mount adapter in the direction of the
arrow (3).