N User Guide Personal Computer VG N - F S s e ri e s
n 2 N Contents Before Use .........................................................................................................................................................................6 Notice ...........................................................................................................................................................................6 ENERGY STAR ..........................................................................................................................
n 3 N Using Peripheral Devices.................................................................................................................................................60 Connecting External Speakers ..................................................................................................................................61 Connecting an External Display .................................................................................................................................
n 4 N Precautions ....................................................................................................................................................................100 On Handling the LCD Screen ..................................................................................................................................101 On Using the Power Source ....................................................................................................................................
n 5 N Floppy Disks ............................................................................................................................................................140 PC Cards .................................................................................................................................................................141 Audio/Video...................................................................................................................................................
n 6 N Before Use Before Use Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal computing. Notice © 2006 Sony Corporation. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
n 7 N Before Use ENERGY STAR As an ENERGY STAR Partner, Sony has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and their office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
n 8 N Before Use Documentation Your documentation includes printed information and user guides to read on your VAIO computer. Guides are provided in PDF format, which you can easily browse through and print out. The My Club VAIO portal is a perfect starting point to use your computer — a comprehensive collection of everything you need to get the most from your computer.
n 9 N Before Use Non-printed Documentation ❑ User Guide (this manual) — Contains features of your computer. It also includes information about the software programs included with your computer, as well as information on solving common problems. ❑ Specifications — The online Specifications describe the hardware and software configuration of your VAIO computer. To view the online Specifications: 1 Connect to the Internet. 2 Go to the Sony online support Web site at http://www.vaio-link.com/.
n 10 N Before Use My Club VAIO In My Club VAIO you can find: Documentation, which gives you: ❑ Access to the User Guide. This manual explains the features of your computer in detail, how to use these features confidently and safely, connect peripheral devices and more. ❑ Access to Help & Training. This is the portal of VAIO Help and Support Center. ❑ Important information about your computer, in the form of notices and announcements.
n 11 N Before Use Help and Support Center Help and Support Center is a comprehensive resource for practical advice, tutorials, and demonstrations to help you learn to use Microsoft Windows XP and your computer. Use the Search feature, Index, or table of contents to view all Windows Help resources, including those that are on the Internet. To access Help and Support Center, click Start and then Help and Support. Or go to the Help and Support Center by pressing the Microsoft Windows key and the F1 key.
n 12 N Before Use Ergonomic Considerations You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments: ❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touch pad, or external mouse.
n 13 N Before Use ❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well. ❑ Lighting – Choose a location where windows and lights do not create glare and reflection on the display. Use indirect lighting to avoid bright spots on the display.
n 14 N Getting Started Getting Started This section describes how to get started with using your VAIO computer.
n 15 N Getting Started Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages.
n 16 N Getting Started A B C D E LCD screen lid lock latch Num lock indicator (page 21) Caps lock indicator (page 21) Scroll lock indicator (page 21) Power button
n 17 N Getting Started Back A Air vent B Battery connector (page 23)
n 18 N Getting Started Right A PC Card release button (page 44) B PC Card slot (page 42) C i.LINK® (IEEE 1394) S400 port (page 74) D Memory Stick media slot*1 (page 47) E Hi-Speed USB (USB 2.0) ports*2 (page 70) F Monitor (VGA) port (page 63) G DC IN port (page 22) *1 Your computer supports Memory Stick Duo media and Memory Stick PRO high speed and high capacity capabilities. *2 Supports high-/full-/low- speeds.
n 19 N Getting Started Left A B C D E Network (Ethernet) port (page 76) Modem port (page 49) Optical disc drive (page 33) Manual eject hole (page 127) Drive eject button (page 33)
n 20 N Getting Started Bottom A Air vents
n 21 N Getting Started About the Indicator Lights Your computer is equipped with the following indicator lights. Indicator Functions Power 1 Illuminates when the power of the computer is on, blinks in Standby mode, and turns off when the computer is in Hibernate mode or off. Battery e Illuminates when the computer is using battery power, blinks when the battery is running out of power, and double-blinks when the battery is charging.
n 22 N Getting Started Connecting a Power Source You can use either an AC adapter or a rechargeable battery pack as a power source for your computer. Using the AC Adapter ✍ Use the computer only with the supplied AC adapter. To use the AC adapter 1 Plug one end of the power cord (1) into the AC adapter (3). 2 Plug the other end of the power cord into an AC outlet (2). 3 Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the computer.
n 23 N Getting Started Using the Battery Pack The battery pack supplied with your computer is not fully charged at the time of purchase. Installing the Battery Pack To install the battery pack 1 Turn off the computer and close the LCD screen lid. 2 Slide the lock switch (1) to the UNLOCK position. 3 Slide the battery into the battery compartment until it clicks into place.
n 24 N Getting Started 4 Slide the lock switch (1) to the LOCK position to secure the battery on the computer. ✍ When the computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet. ! Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this notebook only functions with genuine Sony batteries designed for this model.
n 25 N Getting Started Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of purchase. To charge the battery pack 1 Install the battery pack. 2 Connect the AC adapter to the computer. The computer automatically charges the battery (the battery indicator light flashes in a double blink pattern as the battery charges). When the battery is about 85% charged, the battery indicator turns off.
n 26 N Getting Started ✍ When the battery is running out of power, both the battery and power indicator lights blink. Keep the battery pack in the computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer. If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery or shut down the computer and install a fully charged battery.
n 27 N Getting Started Removing the Battery Pack ! You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while the computer is in Standby mode. To remove the battery pack 1 Turn off the computer and close the LCD screen lid. 2 Slide the lock switch (1) to the UNLOCK position. 3 Slide and hold the release latch (2) and slide the battery away from the computer.
n 28 N Getting Started Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer 1 Turn off any peripherals connected to the computer. 2 Click Start and then Turn Off Computer. The Turn off computer window appears. 3 Click Turn Off. 4 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically. The power indicator light turns off.
n 29 N Using Your VAIO Computer Using Your VAIO Computer This section describes how to get the most out of using your computer.
n 30 N Using Your VAIO Computer Using the Keyboard Your keyboard is very similar to a desktop computer keyboard, but has additional keys that perform model-specific tasks. The VAIO-Link web site (www.vaio-link.com) also contains glossary information to help you use the keyboard. Combinations and Functions with the Fn Key ✍ Some functions are not available until Windows is launched. Combinations/Feature Functions Fn + % (F2): speaker switch Turns on and off the built-in speakers and the headphones.
n 31 N Using Your VAIO Computer Combinations/Feature Fn + (F10): zoom Functions Changes the screen resolution to magnify/restore your computer's screen view. ✍ The default resolutions of the standard view and the magnified view are as follows: Standard view: 1280 x 800 pixels Magnified view: 1024 x 600 pixels The magnified view is not as clear as the standard view, as it is implemented by applying a lower resolution to the computer screen with a higher resolution.
n 32 N Using Your VAIO Computer Using the Touch Pad The keyboard contains a cursor-pointing device, the touch pad (1). You can point to, select, drag, and scroll objects on the screen using the touch pad. Action Description Point Slide one finger on the touch pad to place the pointer (2) on an item or object. Click Press the left button (3) once. Double-click Press the left button twice. Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.
n 33 N Using Your VAIO Computer Using the Optical Disc Drive Your computer is equipped with an optical disc drive. To insert a disc 1 Turn on the computer. 2 Press the drive eject button (1) to open the drive. The tray slides out. 3 Place a disc in the middle of the tray with the label side facing up and gently push until the disc clicks into place.
n 34 N Using Your VAIO Computer 4 Close the tray by pushing it in gently. ! Do not remove the optical disc when the computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction. ✍ If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program.
n 35 N Using Your VAIO Computer Reading and Writing CDs and DVDs Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive supports.
n 36 N Using Your VAIO Computer ! This product is designed to playback discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Please be aware that the audio side (non-DVD side) of a DualDisc may not play on this product because it does not conform to the CD Standard.
n 37 N Using Your VAIO Computer Notes on writing data to a disc ❑ To make the data on a disc readable on an optical disc drive, you need to close the session when you eject it. To complete this process, follow the instructions included with your software. ❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive. ❑ Do not strike or shake the computer while writing data onto a disc.
n 38 N Using Your VAIO Computer Notes on playing DVDs To achieve optimum performance when playing DVDs, you should follow these recommendations. ❑ You can play DVDs using the optical disc drive and the DVD playback software, such as VAIO Zone or WinDVD. See the help file on such software for details. ❑ Close all open applications before playing a DVD movie. ❑ Do not use memory-resident utility software to speed up disc access when playing a DVD. This may cause the computer to malfunction.
n 39 N Using Your VAIO Computer Playing CDs To play an audio CD 1 Insert a disc into the optical disc drive. 2 If nothing appears on the desktop, then click Start, point to All Programs, and click to open a CD program, such as the SonicStage software. If the Audio CD window appears, click to select an option.
n 40 N Using Your VAIO Computer Copying Files to CDs See the online Specifications to find the type of your optical disc drive, and then Reading and Writing CDs and DVDs (page 35) to find about the supported disc media. To copy files to a disc ! Do not strike or shake the computer while writing data onto a disc. 1 Insert a blank disc into the optical disc drive. If the CD Drive window appears, click Take no action and then click OK. 2 Right-click Start and then click Explorer.
n 41 N Using Your VAIO Computer Playing DVDs To play a DVD 1 Close all open programs. 2 Insert a DVD into the optical disc drive. 3 If nothing appears on the desktop, then click Start, point to All Programs, and click to open a DVD program to play the DVD. For instructions on how to use a program, see the help file included with the DVD program. Copying Files to DVDs The DVD writing function is available on selected models only.
n 42 N Using Your VAIO Computer Using PC Cards PC Cards allow you to connect portable external devices to your computer. Inserting a PC Card ! Some PC Cards or their functions may not be compatible with the computer. You do not need to shut down the computer before inserting or removing a PC Card. To insert a PC Card 1 Insert the PC Card into the PC Card slot with the front label facing up. 2 Gently push the PC Card into the slot. The PC Card is automatically detected by your system.
n 43 N Using Your VAIO Computer ✍ Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not recognized. Restart your system to correct the problem. Restarting will restore the original state of the computer.
n 44 N Using Your VAIO Computer Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. To remove a PC Card ✍ To remove a PC Card when the computer is off, skip steps 1 to 6. 1 Double-click the Safely Remove Hardware icon on the taskbar. The Safely Remove Hardware window appears. 2 Select the hardware you want to unplug. 3 Click Stop. The Stop a Hardware Device window appears.
n 45 N Using Your VAIO Computer Using the Memory Stick Media Your computer supports the Memory Stick media. Memory Stick media is a compact, portable, and versatile device especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and other devices. Because it is removable, it can be used for external data storage.
n 46 N Using Your VAIO Computer Write-protecting a Memory Stick Media Some versions of Memory Stick media are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting. Move the tab horizontally or vertically* to set or release write-protection. When the erasure prevention switch is off, data can be saved on the Memory Stick media. When the erasure prevention switch is on, data can be read from but not saved on the Memory Stick media.
n 47 N Using Your VAIO Computer Inserting a Memory Stick Media To insert a Memory Stick media 1 Hold the Memory Stick media with the arrow facing up and toward the Memory Stick media slot. 2 Lift the Memory Stick media slot cover. 3 Carefully slide the Memory Stick media into the slot until it clicks in place.
n 48 N Using Your VAIO Computer To view the contents of the Memory Stick media 1 Click Start and then My Computer to open the My Computer window. 2 Double-click the Memory Stick media icon to view the list of data files saved in the Memory Stick media. To format a Memory Stick media Use the Memory Stick Formatter software. See the help file on the Memory Stick Formatter software for details.
n 49 N Using Your VAIO Computer Using the Internet Setting Up a Dial-up Internet Connection Before you can connect to the Internet, you need to connect your computer to a telephone line via a telephone cable (may not supplied). Once you set up your telephone cable, you're ready to connect to the Internet. To connect a telephone cable 1 Plug one end of the phone cable (1) into the modem port 2 Plug the other end into the wall jack (2). on the computer.
n 50 N Using Your VAIO Computer Using Wireless LAN (WLAN) Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each other through a powerful network. A WLAN is a network in which a user can connect to a local area network (LAN) through a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.
n 51 N Using Your VAIO Computer ✍ In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the WLAN functionality, read the Regulations Guide carefully. Channel selection is explained further in this manual (see Wireless LAN Channel Selection (page 58)). WLAN uses the IEEE 802.11a*/b/g standard, which specifies the used technology.
n 52 N Using Your VAIO Computer Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home.
n 53 N Using Your VAIO Computer To communicate without an access point (ad-hoc) 1 Turn on the WIRELESS or WIRELESS LAN switch. The WIRELESS LAN indicator lights up. On models with the Bluetooth functionality*1, double-click ( / ) on the taskbar to display the Wireless Device Switch window. Select the Enable 2.4 GHz Wireless LAN check box and click OK. 2 Click Start and then Control Panel. 3 Click Network and Internet Connections. 4 Click Network Connections. The Network Connections window appears.
n 54 N Using Your VAIO Computer 12 Enter the Network key*2. The network key should be 5 or 13 alphanumeric characters or 10 or 26 hexadecimal*3 characters long. You can choose whatever you want. 13 Enter exactly the same Network key again, for confirmation. 14 Select the check box This is a computer-to-computer (ad hoc) network; wireless access points are not used at the bottom of the screen. 15 Click OK. Your Network name appears in the Preferred networks. 16 Click Advanced. The Advanced window appears.
n 55 N Using Your VAIO Computer To disconnect from a computer-to-computer (ad-hoc) network 1 Click Start and then Control Panel. 2 Click Network and Internet Connections. 3 Click Network Connections. The Network Connections window appears. 4 In the right panel under LAN or High-Speed Internet, right-click Wireless Network Connection. 5 Click Properties. The Wireless Network Connection Properties window appears. 6 On the Wireless Networks tab, click Advanced. The Advanced window appears.
n 56 N Using Your VAIO Computer Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point, for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN. The access point coordinates transmission and reception from multiple wireless devices within a specific range.
n 57 N Using Your VAIO Computer To connect to a wireless network 1 Make sure an access point is set up. See the manual that came with your access point for more information. 2 Turn on the WIRELESS or WIRELESS LAN switch. The WIRELESS LAN indicator lights up. ( / ) on the taskbar to display the Wireless Device On models with the Bluetooth functionality*, double-click Switch window. Select the Enable 2.4 GHz Wireless LAN check box and click OK. 3 Click Start and then Control Panel.
n 58 N Using Your VAIO Computer Wireless LAN Channel Selection In an 802.11b/g configuration, channel 1 to 13 can be used. (a) With an access point ("infrastructure") ❑ The channel used will be the channel selected by the access point. ! For details on how to select the channel that will be used by the access point, see the access point manual. (b) Without an access point ("ad-hoc") ❑ If the Wireless connection is initiated by the VAIO computer, channel 11 will be selected.
n 59 N Using Your VAIO Computer ✍ The 2.4 GHz bandwidth used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference from other devices that uses the same bandwidth are employed on wireless LAN compatible devices, such interference may cause lower communication speed, narrower communication range, or broken wireless connections.
n 60 N Using Peripheral Devices Using Peripheral Devices You can add functionality to your computer by using the various ports on the computer. ❑ Connecting External Speakers (page 61) ❑ Connecting an External Display (page 62) ❑ Selecting Display Modes (page 66) ❑ Using the Multiple Monitors Function (page 67) ❑ Connecting an External Microphone (page 69) ❑ Connecting a Universal Serial Bus (USB) Device (page 70) ❑ Connecting a Printer (page 73) ❑ Connecting an i.
n 61 N Using Peripheral Devices Connecting External Speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers 1 Plug the speaker cable (1) into the headphones jack (2) i. 2 Plug the other end of the speaker cable to the external speaker (3). 3 Turn down the volume of the speakers before you turn them on. ✍ Make sure your speakers are designed for computer use.
n 62 N Using Peripheral Devices Connecting an External Display You can connect an external display to your computer. For example, you can use the computer with a computer display or a projector. ❑ Connecting a Computer Display (page 63) ❑ Connecting a Multimedia Computer Display (page 64) ❑ Connecting a Projector (page 65) ✍ Connect the power cord after connecting all other cables. Connected external displays are used as second screens.
n 63 N Using Peripheral Devices Connecting a Computer Display You can connect a computer display (monitor) directly to your computer. To connect a computer display 1 If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet. 2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer. ! A video adapter device is required to connect a VGA monitor using the DVI-D port.
n 64 N Using Peripheral Devices Connecting a Multimedia Computer Display You can connect a multimedia computer display that includes built-in speakers and a microphone to your computer. To connect a multimedia computer display 1 Plug the power cord of the multimedia computer display (1) into an AC outlet. 2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer. 3 Plug the speaker cable (4) into the headphones jack (5) i on the computer.
n 65 N Using Peripheral Devices Connecting a Projector You can connect a projector (for example, the Sony LCD projector) directly to your computer. To connect a projector 1 Connect the power cord (1) of the projector into an AC outlet. 2 Plug the RGB signal cable (2) into the monitor (VGA) port (3) a on the computer. 3 Plug the audio cable (4) (not supplied) into the headphones jack (5) i. 4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).
n 66 N Using Peripheral Devices Selecting Display Modes You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected to your computer. If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors Function (page 67) for more information. To select a display 1 Right-click on the desktop to display the context menu. 2 Click the menu item for graphic properties.
n 67 N Using Peripheral Devices Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display attached to the monitor (VGA) port, your computer screen and the external display can function as a single desktop. You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window or a toolbar, from one display to the other.
n 68 N Using Peripheral Devices To select the Multiple Monitors mode 1 Right-click on the desktop to display the context menu. 2 Click the menu item for graphic properties. 3 Follow the on-screen instructions to change the settings. ✍ Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors mode.
n 69 N Using Peripheral Devices Connecting an External Microphone If you need to use a sound input device (for example, to chat on the Internet) you need to plug in an external microphone. To connect an external microphone Plug the microphone cable (1) into the microphone jack (2) m. ✍ Make sure your microphone is designed for computer use.
n 70 N Using Peripheral Devices Connecting a Universal Serial Bus (USB) Device To prevent your computer and/or USB devices from damage, observe the following: ❑ When moving the computer with USB devices connected, avoid any shock or force to the USB ports. ❑ Do not put the computer into a bag or carrying case when it has USB devices connected. Connecting a USB Mouse To connect a USB mouse 1 Choose the USB port (1) 2 Plug the USB mouse cable (2) into the USB port. You can now use your USB mouse (3).
n 71 N Using Peripheral Devices Connecting a USB Floppy Disk Drive You can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive 1 Choose the USB port you prefer to use. 2 Plug the USB floppy disk drive cable into the USB port. Your USB floppy disk drive is now ready for use. ! When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.
n 72 N Using Peripheral Devices Disconnecting a USB floppy disk drive You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. If the computer is off, you can unplug the USB cable directly from the computer. To disconnect a USB floppy disk drive 1 Close all programs accessing the floppy disk drive.
n 73 N Using Peripheral Devices Connecting a Printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a Printer Using the USB Port You can connect a USB printer compatible with your version of Windows to the computer. To connect a printer using the USB port 1 Plug the printer power cord into an AC outlet (1). 2 Choose the USB port (3) 3 Plug one end of a USB printer cable (2) into the USB port and the other end to your printer. you prefer to use.
n 74 N Using Peripheral Devices Connecting an i.LINK Device Notes on connecting i.LINK devices ❑ The computer includes an i.LINK (IEEE 1394) port, which you can use to connect to an i.LINK device such as a digital video camcorder or to connect two VAIO computers in order to copy, delete or edit files. ❑ The i.LINK port of the computer does not supply power to external devices generally powered by i.LINK ports. ❑ The i.
n 75 N Using Peripheral Devices Connecting a Digital Video Camcorder To connect a digital video camcorder 1 Plug one end of the i.LINK cable (1) into the i.LINK port (2) on the computer and the other end into the DV In/Out ports (3) on the digital video camcorder. 2 Launch the DVgate Plus software. ✍ On Sony digital video cameras, ports labeled DV Out, DV In/Out or i.LINK are i.LINK-compatible.
n 76 N Using Peripheral Devices Connecting to a Network (LAN) You can connect your computer to 100BASE-TX/10BASE-T-type networks via an Ethernet network cable. Connect one end of an optional network cable to the Network (Ethernet) port on the computer and the other end to your network. For detailed settings and devices needed to connect to the network, see your network administrator. ✍ The computer can be connected to the network with the default settings.
n 77 N Customizing Your VAIO Computer Customizing Your VAIO Computer This section briefly describes how to change the main settings of your computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities, etc.
n 78 N Customizing Your VAIO Computer Setting the Password Use one of the BIOS functions to set the password. Once you have set the password, you will have to enter the password after the VAIO logo appears to start your computer. The power-on password will allow you to protect your computer from unauthorized access. Adding the Power-on Password ! Once you have set the power-on password, you cannot start the computer without entering the password. Make sure not to forget the password.
n 79 N Customizing Your VAIO Computer 5 Select Password when Power ON under Security. Press the space bar to change the setting from Disabled to Enabled. 6 Press the < or , key to select Exit and select Exit (Save Changes); and then press the Enter key. On the Setup Confirmation screen, make sure that Yes is selected and then press the Enter key. Changing/Removing the Power-on Password To change or remove the power-on password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears.
n 80 N Customizing Your VAIO Computer Setting Up Your Computer with VAIO Control Center The VAIO Control Center utility allows you to consult system information and specify preferences for system behavior. To use VAIO Control Center 1 Click Start, point to All Programs, and click VAIO Control Center. The VAIO Control Center window appears. 2 Select the desired control item and change the settings. 3 Once finished, click OK. The setting of the desired item has been changed.
n 81 N Customizing Your VAIO Computer Using the Power Saving Modes When you use a battery as the power source for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
n 82 N Customizing Your VAIO Computer Using Standby Mode Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber power light flashes in this mode. To activate Standby mode 1 Click Start and then Turn Off Computer. 2 Click Stand By. To return to Normal mode Press any key. ! If you press the power button for more than four seconds, the computer will switch off automatically. You will lose any unsaved data.
n 83 N Customizing Your VAIO Computer To change the Standby mode settings 1 Click Start and then Control Panel. 2 Click Performance and Maintenance. 3 Click Power Options. The Power Options Properties window appears. 4 Select the Power Schemes tab. 5 Change the System Standby settings.
n 84 N Customizing Your VAIO Computer Using Hibernate Mode In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. Even when the battery runs down, no data will be lost. The power indicator light is off in this mode. To activate Hibernate mode Press the Fn+F12 keys. The Hibernating screen appears and the computer enters Hibernate mode. Alternatively, 1 Click Start and then Turn Off Computer. 2 Click Hibernate.
n 85 N Customizing Your VAIO Computer ✍ If you do not use the computer for a long period of time, put the computer into Hibernate mode. This power saving mode saves you the time of shutting down or resuming. When the computer is in Hibernate mode, you cannot insert a disc. Hibernate mode requires more time than Standby mode to be activated. It takes more time to return to Normal mode from Hibernate mode than from Standby mode. Hibernate mode uses less power than Standby mode.
n 86 N Customizing Your VAIO Computer Managing Power with VAIO Power Management Power management helps you to set up power schemes for running on AC power or batteries to suit your requirements for power consumption. VAIO Power Management is a software application developed exclusively for VAIO computers. With this software application, you can enhance the Windows power management functions to ensure better operations of your computer and for longer battery life.
n 87 N Customizing Your VAIO Computer Activating VAIO Power Management Power Schemes VAIO Power Management provides several predefined power schemes. Each power scheme consists of a group of power management settings that are designed to meet specific power management goals, ranging from maximum power management to no power management. To activate a VAIO Power Management power scheme 1 Click Start and then Control Panel. 2 Click Performance and Maintenance. 3 Click Power Options.
n 88 N Customizing Your VAIO Computer Setting Up Your Language with Windows XP Professional The language mode selection is available on models with Windows XP Professional, but not with Windows XP Home Edition. Please see the online Specifications to see which Windows edition is installed on your model. Windows XP Professional computers include the Multilingual User Interface (MUI) feature.
n 89 N Customizing Your VAIO Computer To change the country and language settings 1 Click Start and then Control Panel. 2 In the Control Panel window, double-click the Regional and Language Options icon. If you do not see this icon, click Switch to Classic View on the left side. 3 In the Regional Options tab of the Regional and Language Options window, select your language from the Standards and formats drop-down menu.
n 90 N Customizing Your VAIO Computer To change the keyboard layout 1 Click Start and then Control Panel. 2 In the Control Panel window, double-click the Regional and Language Options icon. If you do not see this icon, click Switch to Classic View on the left side. 3 In the Languages tab of the Regional and Language Options window, click the Details button. The Text Services and Input Languages window appears.
n 91 N Customizing Your VAIO Computer Configuring Your Modem Before you can start using your internal modem (not all modem are built-in), or each time you use your modem while traveling, make sure that the country of the active location defined in the Phone and Modem Options dialog box matches the country you are dialing from. To change your modem country settings 1 Click Start and then Control Panel. 2 Click Printers and Other Hardware. 3 Double-click Phone and Modem Options.
n 92 N Customizing Your VAIO Computer 9 Click Apply/OK. Your modem is configured. ✍ Before applying new country settings, please make sure your phone cable is disconnected from your computer.
n 93 N Upgrading Your VAIO Computer Upgrading Your VAIO Computer Your computer and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee due to mishandling, we recommend that: ❑ You contact your dealer to install a new memory module. ❑ You do not install it yourself, if you are not familiar with upgrading memory on a computer. ❑ You do not touch the connectors or open the memory panel.
n 94 N Upgrading Your VAIO Computer Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages. The number of available slots depends on the configuration of your model. Notes on adding/removing memory modules ❑ Be careful when changing memory. Improper installation of memory modules may cause damage to your system.
n 95 N Upgrading Your VAIO Computer ❑ Use the special bag delivered with the memory module or wrap the module in aluminum foil to protect it from electrostatic discharge. ❑ Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of the computer, will result in damage to the computer and any repair costs will not be covered by the warranty.
n 96 N Upgrading Your VAIO Computer Removing and Installing a Memory Module To change or add a memory module 1 Shut down the computer and disconnect all peripheral devices. 2 Unplug the computer and remove the battery pack. 3 Wait until the computer cools down. 4 Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module compartment cover.
n 97 N Upgrading Your VAIO Computer 6 Remove the memory module: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). 7 Remove the new memory module from its packaging.
n 98 N Upgrading Your VAIO Computer 8 Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any other components on the motherboard. Do not damage the insulation sheet equipped for module protection. 9 Replace the memory module compartment cover. 10 Tighten the screw on the bottom of the computer. 11 Reinstall the battery and turn on the computer.
n 99 N Upgrading Your VAIO Computer Viewing the Amount of Memory To view the amount of memory 1 Turn on the computer. 2 Click Start, point to All Programs, and click VAIO Control Center. 3 Double-click the System Information folder in the VAIO Control Center window. 4 Double-click the System Information icon in the System Information folder. You can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and restart the computer.
n 100 N Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage.
n 101 N Precautions On Handling the LCD Screen ❑ Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be careful when using the computer near a window. ❑ Do not scratch the LCD screen or exert pressure on it. This could cause a malfunction. ❑ Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal.
n 102 N Precautions On Using the Power Source ❑ See the online Specifications to check the power operation of your model. ❑ Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder. ❑ You can purchase a power strip with a surge protector. This device prevents damage to the computer caused by sudden power surges, in an electrical storm, for example. ❑ Do not place heavy objects on the power cord. ❑ To disconnect the cord, pull it out by the plug.
n 103 N Precautions On Handling Your Computer ❑ Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of the computer. ❑ If you drop a solid object or any liquid onto the computer, shut down the computer and then unplug it. You may want to have the computer checked by qualified personnel before operating it again.
n 104 N Precautions ❑ Do not use cut or damaged connection cables. ❑ If the computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In this case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact VAIO-Link. ❑ Make sure you disconnect the power cord before cleaning the computer. ❑ To avoid losing data if the computer is damaged, back up your data regularly.
n 105 N Precautions On Handling Floppy Disks ❑ Do not open the shutter manually or touch the surface of the floppy disk. ❑ Keep floppy disks away from magnets. ❑ Keep floppy disks away from direct sunlight and other sources of heat. ❑ Keep the floppy disk away from any liquid. Do not let the floppy disk get wet. When you are not using the floppy disk, always remove it from the floppy disk drive and use a storage case. ❑ If the floppy disk comes with a label, make sure that the label is properly attached.
n 106 N Precautions On Handling Discs ❑ Do not touch the surface of the disc. ❑ Do not drop or bend the disc. ❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: ❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc.
n 107 N Precautions On Using the Battery Pack ❑ Do not leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. ❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures. ❑ Charge the batteries at temperatures between 10°C to 30°C. Lower temperatures require a longer charging time. ❑ Certain rechargeable batteries do not meet Sony quality and safety standards.
n 108 N Precautions On Using Headphones ❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings. ❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play.
n 109 N Precautions On Handling the Hard Disk The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock or dust. Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling the computer. To avoid damaging your hard disk ❑ Do not subject the computer to sudden movements. ❑ Keep the computer away from magnets.
n 110 N Troubleshooting Troubleshooting This section describes how to solve common problems you might encounter when using your computer. Many problems have simple solutions. Try these suggestions before contacting VAIO-Link.
n 111 N Troubleshooting Computer What should I do if my computer does not start? ❑ Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on. ❑ Make sure the battery is installed properly and charged. ❑ Make sure the floppy disk drive (if applicable) is empty. ❑ If your computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS is plugged into a power source and turned on.
n 112 N Troubleshooting What should I do if a BIOS error appears when I turn on my computer? If the message "Press to resume, to setup" appears at the bottom of your computer screen, follow these steps: 1 Press the F2 key. The BIOS setup screen appears. 2 Set the date (month/day/year). Press the Enter key. 3 Press the m key to select System Time, and then set the time (hour: minute: second). Press the Enter key. 4 Press the , key to select the Exit tab, and then press the F9 key.
n 113 N Troubleshooting What should I do if my computer or software stops responding? ❑ It is best to turn off your computer using the Turn Off Computer option on the Microsoft Windows Start menu, located on the taskbar. Using other methods, including those listed below, may result in loss of unsaved data. ❑ Click Start, point to Turn Off Computer, and then click Turn Off. ❑ If your computer does not turn off, press the Ctrl+Alt+Delete keys simultaneously.
n 114 N Troubleshooting Why doesn't my computer enter Standby or Hibernate mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Standby or Hibernate. To restore your computer to normal operating stability 1 Close all open programs. 2 Click Start, Turn Off Computer, and then Restart. 3 If your computer does not restart, press the Ctrl+Alt+Delete keys simultaneously.
n 115 N Troubleshooting What should I do if a message window, notifying of incompatibility or improper installation of the battery pack, appears and my computer enters Hibernate mode? ❑ This symptom could be due to the battery pack not being installed properly. To resolve this symptom, turn off your computer and remove the battery pack. Then install the battery pack to the computer again. For details, see Installing the Battery Pack (page 23).
n 116 N Troubleshooting Why does the System Properties window display a slower CPU speed than the maximum? This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation purposes, System Properties may display the CPU's current speed instead of the maximum speed.
n 117 N Troubleshooting Why does it take time before my computer starts? If Norton Internet Security's Personal Firewall is active, it may take some time before the desktop screen appears due to network security checkups. Why doesn't my computer screen turn off when the time selected for the automatic turnoff action has passed? The originally selected VAIO's screen saver disables the timer setting, which you can select using the Windows power options, for your computer screen to turn off.
n 118 N Troubleshooting System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to the computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly.
n 119 N Troubleshooting How do I keep my antivirus software updated? You can keep the Norton Internet Security software program current with the latest updates from Symantec Corporation. To download and install the latest security update 1 2 Double-click the Norton Internet Security icon on the taskbar. If you have not previously registered the antivirus software, a series of information wizards appears. 1 Follow the on-screen instructions to complete each wizard.
n 120 N Troubleshooting Battery How do I find the battery charging status? See Charging the Battery Pack (page 25). When is my computer using AC power? When your computer is directly connected to the AC adapter, it uses AC power, even if a battery is installed. When should I recharge the battery? ❑ When the battery level falls below 10 percent. ❑ When both the battery and power indicators blink. ❑ When you have not used the battery for a long time.
n 121 N Troubleshooting Can my computer enter Hibernate mode while using battery power? Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 84) for information on how you can manually activate Hibernate mode.
n 122 N Troubleshooting Internet What should I do if my modem does not work? ❑ Make sure the telephone cable is securely plugged into the modem port on your computer and the wall jack. ❑ Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone. ❑ Make sure the telephone number the program is dialing is correct. ❑ Make sure the software you are using is compatible with your computer's modem. (All preinstalled Sony programs are compatible.
n 123 N Troubleshooting Why is my modem connection slow? Your computer is equipped with a V.92/ V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems.
n 124 N Troubleshooting Networking What should I do if my computer cannot connect to a wireless LAN access point? ❑ Connection availability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ❑ Make sure the WIRELESS or WIRELESS LAN switch is on and the WIRELESS LAN indicator is lit on your computer. ❑ Make sure power to the access point is on.
n 125 N Troubleshooting Why is the data transfer speed slow? ❑ The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed, move your computer away from obstructions or closer to any access point you may be using.
n 126 N Troubleshooting What are channels? ❑ Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. ❑ If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point.
n 127 N Troubleshooting CDs and DVDs Why does my computer freeze when I try to read a disc? The disc that your computer is trying to read may be dirty or damaged. Follow these steps: 1 Restart the computer by clicking Start, Turn Off Computer, and Restart. 2 Eject the disc from the optical disc drive. 3 Examine the disc for dirt or damage. If the disc is dirty, see On Handling Discs (page 106) for instructions on how to clean it.
n 128 N Troubleshooting What should I do if I cannot play a CD or DVD properly on my computer? ❑ Make sure the disc was inserted into the optical disc drive with the label facing up. ❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions. ❑ If the CD or DVD is dirty or damaged, your computer will stop responding.
n 129 N Troubleshooting 5 Double-click the optical disc drive device to open the submenu. 6 Double-click the listed drive, and select the Properties tab. 7 Click to select the Enable digital CD audio for this CD-ROM device check box, if it is not selected. You can confirm the driver software by selecting the Driver tab, and clicking Driver Details. 8 Click OK to close the window. ❑ Make sure an adhesive label is not affixed to the CD or DVD.
n 130 N Troubleshooting What should I do if I cannot write data to CD media? ❑ Do not launch any software application or allow any to launch automatically, not even a screen saver. ❑ Do not use the keyboard. ❑ Do not use a CD-R/RW disc that has a label affixed to it. This could cause a write error or other damage. What should I do if I cannot write data to DVD media? ❑ Make sure you are using the correct DVD recordable media.
n 131 N Troubleshooting What should I do if I cannot write data to DVD-RAM media using Windows functions? This Q & A entry applies to selected models only. See the online Specifications to see whether your model is equipped with the DVD±RW/RAM drive. Follow these steps to change the settings: 1 Click Start and then My Computer. 2 Right-click the optical disc drive icon and select Properties. 3 Click the Recording tab. 4 Click to cancel the Enable CD recording on this drive check box. 5 Click OK.
n 132 N Troubleshooting Display Why did my computer screen go blank? ❑ Your computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or Hibernate). If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen. See Using the Power Saving Modes (page 81) for more information. ❑ Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on.
n 133 N Troubleshooting What should I do if the LCD brightness of your computer screen changes? The LCD brightness setting, adjusted with the Fn+F5/F6 keys, is temporary and this adjustment is overridden by the setting on the VAIO Power Management tab when another power scheme is selected. To save this preference for the brightness ✍ To do the following procedure, you must have administrator rights on your computer. 1 Click Start and then Control Panel. 2 Click Performance and Maintenance.
n 134 N Troubleshooting Printing What should I do if I cannot print a document? ❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and computer. ❑ Make sure your printer is compatible with the Windows operating system installed on your computer. ❑ You may need to install the printer driver software before you use your printer. See the manual that came with the printer for more information.
n 135 N Troubleshooting Microphone What should I do if my microphone does not work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the Microphone jack on your computer.
n 136 N Troubleshooting Mouse What should I do if my computer does not recognize my mouse? ❑ Make sure your mouse is securely plugged into the port. ❑ Restart your computer with your mouse connected. What should I do if the pointer does not move when I use my mouse? ❑ Make sure another mouse is not installed. ❑ If you are playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart your computer.
n 137 N Troubleshooting Speakers What should I do if my speakers do not work? ❑ Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound. ❑ Make sure your speakers are designed for computer use. ❑ If your speakers have a muting button, set the button to off. ❑ If you have connected an audio cable to the headphones jack, disconnect the cable and use the speaker cable supplied with your speakers.
n 138 N Troubleshooting Touch Pad What should I do if the touch pad does not work? ❑ Try restarting your computer. Press the Ctrl+Alt+Delete keys simultaneously. In the Windows Task Manager window, select Restart from the Shut Down menu to restart the computer. ❑ If the pointer does not move while playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart your computer. ❑ If the problem persists, make sure another mouse is not installed.
n 139 N Troubleshooting Keyboard What should I do if the keyboard configuration is wrong? ❑ The language layout of your computer's keyboard is specified on the sticker on the box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. ❑ To change the keyboard configuration, follow these steps: 1 Click Start and then Control Panel 2 Click Date, Time, Language and Regional Options, and click Regional and Language Options.
n 140 N Troubleshooting Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: 1 Close all programs that were accessing the floppy disk drive.
n 141 N Troubleshooting PC Cards What should I do if my PC Card does not work? ❑ Make sure the PC Card is inserted properly. See Inserting a PC Card (page 42) for more information. ❑ Make sure the PC Card is compatible with the Microsoft Windows operating system installed on your computer. ❑ See the manual that came with your PC Card for more information. You may need to install driver software if you are not using a Sony PC Card.
n 142 N Troubleshooting Audio/Video What should I do if I cannot use my DV camcorder? If the message that DV equipment seems to be disconnected or turned off appears, the i.LINK cable may not be securely plugged into the ports on your computer or camcorder. Unplug the connectors, and plug them in again. See Connecting an i.LINK Device (page 74) for more information. ✍ i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.
n 143 N Troubleshooting Memory Stick Media What should I do if I cannot open my image files? You may need to reformat your Memory Stick media. Formatting Memory Stick media erases all data, including music data, previously saved to it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep. 1 Copy the data from the Memory Stick media onto your computer's hard disk to save data or images.
n 144 N Troubleshooting Peripherals What should I do if I cannot connect a USB device? ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check the battery is charged. If you are using a printer, check the power cable is connected properly to the AC outlet. ❑ Try using a different USB port on your computer. The driver could be installed to the specific port you used the first time you connected the device.
n 145 N Support Options Support Options The section contains information on where to go for answers to questions about your computer. Sony Support Information See the following sources for answers in the sequence listed below. See Documentation (page 8) for details on the printed and online documentation supplied with your computer, as well as further sources of reference. ❑ Go to the help files that accompany your software for instructions on using the software.
n 146 N Support Options e-Support What is e-Support? You have searched our user guides and web site (www.vaio-link.com) but have not found an answer to your question/issue? e-Support is the ideal solution for you! Our e-Support Web Portal is an interactive web site on which you can submit any technical query you may have regarding your computer and receive answers from our dedicated support team.
n 147 N Support Options Can I submit my questions at any time? Yes, you can submit your questions 24/7, but please keep in mind that our e-Support Team can only treat your queries from Monday till Friday between 8am and 6pm.
n 148 N Support Options Trademarks Sony, Battery Checker, Click to DVD, DVgate Plus, HotKey Utility, Memory Stick Formatter, Prepare your VAIO, SonicStage, SonicStage Mastering Studio, VAIO Control Center, VAIO Edit Components, VAIO Media, VAIO Power Management, Image Converter, My Club VAIO, VAIO Update, Memory Stick, the Memory Stick logo, VAIO and the VAIO logo are trademarks of Sony Corporation. Intel, Pentium, and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation.
n 149 N Support Options All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™ or ® marks are not specified. Specifications are subject to change without notice. All other trademarks are trademarks of their respective owners. Please see the online Specifications to see what software is available for your model.
n © 2006 Sony Corporation