User Guide (primary user manual)
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using Peripheral Devices
- Connecting a Port Replicator
- Connecting External Speakers
- Using the Remote Commander
- Connecting an External Display
- Selecting Display Modes
- Using the Multiple Monitors Function
- Connecting an External Microphone
- Connecting a Universal Serial Bus (USB) Device
- Connecting a Printer
- Connecting an i.LINK Device
- Connecting to a Network (LAN)
- Customizing Your VAIO Computer
- Upgrading Your VAIO Computer
- Precautions
- Troubleshooting
- Support Options
149
nN
Troubleshooting
5 Double-click the optical disc drive device to open the submenu.
6 Double-click the listed drive, and select the Properties tab.
7 Click to select the Enable digital CD audio for this CD-ROM device check box, if it is not selected.
You can confirm the driver software by selecting the Driver tab, and clicking Driver Details.
8 Click OK to close the window.
❑ Make sure an adhesive label was not attached to the CD or DVD. Adhesive labels can come off while the disc is in the
optical disc drive and damage the drive or cause it to malfunction.
❑ If a region code warning appears, the disc may be incompatible with the optical disc drive. Check the DVD package to
make sure the region code is compatible with the optical disc drive.
❑ If you notice condensation on the computer, do not use the computer for at least one hour. Condensation can cause the
computer to malfunction.
❑ Make sure the computer is running on AC power supply and try the disc again.