N User Guide Personal Computer VG X - T P 2 0 S e ri e s
n 2 N Contents Before Use .........................................................................................................................................................................5 Documentation .............................................................................................................................................................6 Getting Started .............................................................................................................................
n 3 N Using Peripheral Devices.................................................................................................................................................86 Selecting Display Modes............................................................................................................................................87 Using the Multiple Monitors Function .........................................................................................................................
n 4 N Troubleshooting .............................................................................................................................................................125 Computer .................................................................................................................................................................126 System Security ..........................................................................................................................................
n 5 N Before Use Before Use Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal computing experience. ! External views illustrated in this manual may look slightly different from those of your computer.
n 6 N Before Use Documentation Your documentation includes printed information and user guides to read on your VAIO computer. Printed Documentation ❑ Welcome mat — Contains an overview of components connection, set-up information, etc. ❑ Safety Information — Contains safety guidelines and owner information. Non-printed Documentation ❑ User Guide (this manual) — Explains features of your computer.
n 7 N Before Use ❑ VAIO Recovery Center User Guide — Provides information about restoring individual software programs, software drivers, and drive partition(s) or your entire hard disk drive to the original factory installed settings. To access this on-screen guide: 1 Click Start and Help and Support. 2 Click Manuals & Specifications. 3 Click VAIO Recovery Center User Guide. ❑ Media Center User Guide (Selected models only) — Provides information about using Windows Media Center.
n 8 N Before Use Help and Support Help and Support is easy to access and provides a single location for information and technical assistance for your VAIO computer. Choose from the following categories to find the answers you need. To access Help and Support, click Start and Help and Support. ❑ Manuals & Specifications Here you will find the on-screen User Guide, warranty information, other VAIO documents, and system and software information for your computer.
n 9 N Before Use ❑ VAIO Registration Please take a moment to register your VAIO computer to enjoy the following benefits: ❑ Your computer will be registered with Sony Product Support. ❑ You will receive an e-coupon good for purchase of eligible accessories at SonyStyle.com. ❑ Extended Service Plan Sony VAIO products come with a 1 year Limited Warranty. Protect your investment further by purchasing an optional Extended Service Plan.
n 10 N Getting Started Getting Started This section describes how to get started using your VAIO computer. ! Before starting your computer for the first time, do not connect any other hardware, except a display (TV), that did not originally come with your computer. Be sure to start up your computer with only the supplied accessories connected and set up your system.
n 11 N Getting Started Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages. ! The appearance of your computer may be different from those illustrated in this manual due to variations in specifications. It may also vary in some countries or areas.
n 12 N Getting Started Top A Hard disk drive/Optical disc drive indicator (page 16) B Power button/Power indicator (page 16) C WLAN (Wireless LAN) indicator (page 16)
n 13 N Getting Started Front A SD memory card slot (page 72) B WLAN (Wireless LAN) switch (page 77) C Remote sensor Point the supplied remote commander to this sensor for operations. D Optical disc drive (page 35) E Memory Stick slot*1 (page 66) F Air vent G Media Access indicator (page 16) H I J K Hi-Speed USB (USB 2.0) ports*2 (page 90) *1 Your computer supports both standard- and Duo-size Memory Stick media. *2 Support high-/full-/low- speeds. i.
n 14 N Getting Started Back A Air vents B VHF/UHF input port*1 (page 46) C WLAN ANT port (page 79) D INFRARED TRANSMITTER OUT jack*1 (page 57) E Hi-Speed USB (USB 2.0) ports*2 (page 90) F Headphones jack Connect external headphones. G Microphone jack Connect an external microphone. H OPTICAL OUT port (Output Sampling Rate: 44.1 KHz/48.0 KHz/96.0 KHz) Connect an S/PDIF device such as digital headphones or an AV amplifier.
n 15 N Getting Started Bottom A Air vents B Security slot
n 16 N Getting Started About the Indicator Lights Your computer is equipped with the following indicator lights. Indicator Functions Power 1 The indication behavior varies depending on the state of your computer: Green lit: the computer is on. Orange lit: the computer is in Sleep mode. Off: the computer is off. Media Access Illuminates when data is read from or written to a memory card. (Do not enter Sleep mode or turn off the computer when this indicator is on.
n 17 N Getting Started Setting Up Your Computer Connecting a Display Connect a display (not supplied) to your computer. When connecting it, see the manual that came with your display as well. ✍ Connect the power cord of your display after connecting all other cables.
n 18 N Getting Started To connect a display (HDMI-compatible TV) 1 Plug one end of the HDMI cable (supplied) (1) to the HDMI OUT port (2) on the computer. 2 Plug the other end to the display (TV) (3).
n 19 N Getting Started ✍ See the manual that came with your TV for more information on installation and use. If your TV is equipped with a DVI-D port, you can use the HDMI cable and the HDMI to DVI-D adapter (both supplied) for connection. To use them for connection, however, you also need an audio cable (not supplied) since no audio signals are carried through the DVI-D port. If your TV is equipped with an HDMI port and a DVI-D port, we recommend that you use the HDMI port.
n 20 N Getting Started To connect a display (monitor) 1 If you want to connect a VGA monitor, connect the display cable (1) (not supplied) into the monitor (VGA) port (2) on the back of the computer. 2 If necessary, plug the display cable into the display.
n 21 N Getting Started Connecting a Power Source You need an AC adapter to connect to an AC power source and it must be plugged into the power source before you can establish communication with your wireless keyboard. ✍ Use your computer only with the supplied AC adapter. To connect the AC adapter 1 Plug one end of the power cord (1) into the AC adapter (3). 2 Plug the other end of the power cord and the power cord from your display (TV) into AC outlets (2).
n 22 N Getting Started
n 23 N Getting Started ✍ To disconnect your computer completely from AC power, unplug the power cord when the computer is off. Make sure that the AC outlets are easily accessible. ! If you unplug the AC adapter from your computer while the computer is on or in Sleep mode, you may lose all unsaved data.
n 24 N Getting Started Attaching the Rear Cover An exclusively designed rear cover is supplied with your computer for port protection and tidy cabling. Once you have set up your computer, attach the rear cover. Be sure to hold the cover with your both hands when attaching it. ! You may not be able to attach the rear cover depending on the shape or size of connected cable plugs. In such a case, leave the back of your computer uncovered and keep the rear cover at hand.
n 25 N Getting Started Connecting the Wireless Keyboard A wireless keyboard and four AA alkaline batteries for use in the keyboard are supplied with your computer. Before attempting to use the wireless keyboard, you must install the batteries and establish communication between the computer and the keyboard. ✍ If you find your keyboard not working, for example after replacement of the keyboard batteries, try the following steps for reconnection.
n 26 N Getting Started 3 Insert the supplied four AA batteries into the battery compartment as illustrated below: 4 Turn on the computer. 5 Slide the power switch (2) on the keyboard to the ON position. 6 Press the CONNECT button (3) on the front of the computer. 7 Press the CONNECT button (4) on the bottom of the keyboard. The connect indicator turns on in the LCD window on the keyboard when connection is established between the computer and the keyboard. If not, repeat the procedure.
n 27 N Getting Started ✍ You can check the battery indicator ( or ) in the LCD window on the wireless keyboard for its battery power level. If the wireless keyboard does not operate properly, the batteries may need to be replaced. If the wireless keyboard is not being used for an extended period of time, remove the batteries to avoid possible damage from battery leakage.
n 28 N Getting Started Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer 1 Turn off any peripherals connected to the computer. 2 Click Start, the arrow 3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically. The power indicator light turns off. next to the Lock button, and Shut Down.
n 29 N Using Your VAIO Computer Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer.
n 30 N Using Your VAIO Computer Using the Keyboard A wireless keyboard is supplied with your computer. The wireless keyboard uses a standard key arrangement with additional keys that perform specific functions. Using the Wireless Keyboard ! To maintain good communication, operate the wireless keyboard within the distance limitations of keyboard: approximately 32.8 feet (10 m) from your computer. Confirm that the supplied AA batteries are properly installed.
n 31 N Using Your VAIO Computer A Security slot B Function keys Perform certain tasks. The task associated with each function key varies among software applications. C Shortcut buttons Perform the pre-assigned tasks. The default tasks are as follows: : Launches VAIO Living Browser. P , p: Displays the previous or next page while VAIO Living Browser is running. : Magnifies the screen view while VAIO Living Browser is running. One press magnifies the contents by 25%.
n 32 N Using Your VAIO Computer F Power switch E Indicators Slide the power switch to turn on and off the wireless keyboard. (Num lock): Turns on while in the Num Lock state. G Windows key (Caps lock): Turns on while in the Caps Lock state. Displays the Start menu. (Scroll lock): Turns on while in the Scroll Lock state. (Connect): Turns on while connection between the computer and the wireless keyboard is in place to indicate that the keyboard is ready for use (page 25).
n 33 N Using Your VAIO Computer A Battery compartment Storage compartment for the AA batteries. B CONNECT button (page 25) Press to enable the wireless keyboard to communicate with the computer.
n 34 N Using Your VAIO Computer Using the Touch Pad You can point to, select, drag, and scroll objects on the screen using the touch pad. Action Description Point Slide your finger on the touch pad (1) to place the pointer (2) on an item or object. Click Press the left button (3) once. Double-click Press the left button twice. Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.
n 35 N Using Your VAIO Computer Using the Optical Disc Drive Your computer is equipped with an optical disc drive. To insert a disc 1 Turn on the computer. 2 Push in the optical disc drive tray with your fingertip to eject it. 3 Grasp the tray and gently pull it out.
n 36 N Using Your VAIO Computer 4 Place a disc in the middle of the tray with the label side facing upward; and gently push it until the disc clicks into place while holding the bottom of the tray with the other hand. ! When the optical disc drive tray is out, be sure not to exert pressure on the tray as it may damage the tray or the disc drive. 5 Close the tray by pushing it in gently. ! Do not remove the optical disc when your computer is in Sleep mode. Doing so may cause the computer to malfunction.
n 37 N Using Your VAIO Computer Reading and Writing Optical Discs Your computer plays and records CDs, DVDs, and Blu-ray Disc™ media, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive supports.
n 38 N Using Your VAIO Computer PR: playable and recordable P: playable but not recordable –: not playable or recordable CDROM Video CD Music CD CD Extra CD-R/ RW DVDROM DVDVideo BDROM DVD-R/ DVD+R/ DVD+R DVD-R RW RW DL DL DVDRAM DVD±RW/ ±R DL/RAM P P P P PR P P – PR*1 *2 PR PR*5 PR*6 PR*3 *4 – Blu-ray Disc P P P P PR*8 P P P PR*1 *2 PR PR*5 PR*6 PR*3 *4 PR*7 *11 Blu-ray Disc Combo P P P P PR*8 P P P PR*1 *2 PR PR*5 PR*6 PR*3 *4 P*11 BD-R*9/ RE*10 *1
n 39 N Using Your VAIO Computer ! This product is designed to play back discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Be aware that the audio side (non-DVD side) of a DualDisc may not play on this product because it does not conform to the CD Standard.
n 40 N Using Your VAIO Computer Notes on writing data to a disc ❑ Use only Sony recommended software, which is preinstalled on your computer, to write data to a disc. Other software programs may not be fully compatible and errors may result. ❑ To make data on a disc readable on the optical disc drive, you need to close the session before you eject it. To complete this process, follow the instructions included with your software. ❑ Only use circular discs.
n 41 N Using Your VAIO Computer Notes on playing discs To achieve optimum performance when playing discs, you should follow these recommendations. ❑ Some CD players and computers' optical disc drives may not be able to play audio CDs created with the CD-R or CD-RW media. ❑ Some DVD players and computers' optical disc drives may not be able to play DVDs created with the DVD+R DL, DVDR DL, DVD+R, DVD+RW, DVD-R, DVD-RW, or DVD-RAM media.
n 42 N Using Your VAIO Computer Playing CDs To play an audio CD 1 Insert a disc into the optical disc drive. 2 If nothing appears on the desktop, then click Start, All Programs, and the desired CD software to play the CD. If the Audio CD window appears, click to select an option. Copying Files to CDs To copy files to a disc ! Do not strike or shake your computer while writing data to a disc. 1 Insert a disc into the optical disc drive.
n 43 N Using Your VAIO Computer Playing DVDs To play a DVD 1 Close all running software applications. 2 Insert a DVD into the optical disc drive. 3 If nothing appears on the desktop, then click Start, All Programs, and the desired DVD software to play the DVD. For instructions on how to use the software, see the help file on your DVD software. Copying Files to DVDs To copy files to a disc 1 Close all running software applications. 2 Insert a disc into the optical disc drive.
n 44 N Using Your VAIO Computer Playing Blu-ray Disc Media To play a Blu-ray Disc media 1 Close all running software applications. 2 Insert a Blu-ray Disc media into the optical disc drive. 3 If nothing appears on the desktop, then click Start, All Programs, and the desired Blu-ray Disc software to play the disc. For instructions on how to use the software, see the help file on your software.
n 45 N Using Your VAIO Computer Using the TV Function To enhance your audio and visual experience in conjunction with Windows Media Center, your computer may be delivered with an external digital cable tuner or have two TV tuner boards installed: one analog tuner board and one ATSC tuner board. See the online specifications to find out about your TV tuner board configuration. ! For details on the external digital cable tuner, see the manual that came with the tuner.
n 46 N Using Your VAIO Computer Setting Up TV Connections ! The following connections may not be available in some countries or areas. The best method to connect your computer system, TV monitor or display, and cable service access, depends on the type of cable connection available in your home. TV signal reception strength will vary widely depending on service availability in your area as well as the type of connection available.
n 47 N Using Your VAIO Computer Connecting to standard cable access (CATV) To connect in CATV mode (Option 1) 1 Connect one end of the TV coaxial cable (1) (supplied with selected models only) to your cable service access (wall outlet) (2). 2 Connect the other end to the VHF/UHF input port (3) on the computer.
n 48 N Using Your VAIO Computer To connect in CATV mode (Option 2) 1 Connect the two metal hooks on a 75-ohm/300-ohm RCA transformer cable (1) (not supplied) to the screw-type grips at your cable service access (wall outlet) (2). 2 Connect one end of the TV coaxial cable (3) (supplied with selected models only) to the transformer end of the RCA transformer cable (1). Connect the other end to the VHF/UHF input port (4) on the computer.
n 49 N Using Your VAIO Computer Connecting to a standard antenna You can connect your computer to an indoor/outdoor antenna system, using Option 1 or Option 2 from the previous section, Connecting to standard cable access (CATV) (page 47). Depending on the type of antenna system in your home, your connection may require a VHF/UHF RF combiner/transformer (not supplied) to connect the computer and the indoor/outdoor antenna system.
n 50 N Using Your VAIO Computer To connect in land-based (terrestrial) broadcasting mode (Option 2) 1 Connect one end of a 300-ohm twin lead cable (1) (not supplied) to the screw-type grips at your antenna outlet (2). Connect the other end to the grips on a VHF/UHF RF combiner/transformer (3) (not supplied). 2 Connect a coaxial cable feed connector (4) (not supplied) to the VHF/UHF RF combiner/transformer (3).
n 51 N Using Your VAIO Computer Connecting with a cable or satellite set-top box (STB) You can connect your computer to cable service access that uses a set-top box (cable or satellite). When using the set-top box (STB) setup, you can change channels only through the STB, using its controls or the supplied remote commander. When using the STB setup: ❑ A standard TV remote control cannot be used to change TV channels.
n 52 N Using Your VAIO Computer To connect in STB mode (Option 1) 1 Connect one end of a TV coaxial cable (1) (not supplied) to your cable service access (wall outlet) (2). Connect the other end to the VHF/UHF IN port on the back panel of your set-top box (STB) (3). 2 Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF OUT port on the set-top box (STB) (3). Connect the other end to the single-connection end of a splitter device (5) (not supplied).
n 53 N Using Your VAIO Computer To connect in STB mode (Option 2) 1 Connect one end of a TV coaxial cable (1) (supplied with selected models only) to your cable service access (wall outlet) (2). Connect the other end to the VHF/UHF IN port on the back panel of your set-top box (STB) (3). 2 Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF OUT port on the set-top box (STB) (3). Connect the other end to the VHF/UHF input port (5) on the rear of your TV monitor or display.
n 54 N Using Your VAIO Computer
n 55 N Using Your VAIO Computer Using the Remote Commander A remote commander is supplied with your computer for using Windows Media Center features, including TV channel selection. Before you use the remote commander Before using the remote commander, you need to insert the supplied AA manganese batteries to enable communication between the computer and the remote commander. To insert batteries 1 Turn the remote commander over.
n 56 N Using Your VAIO Computer 3 Insert the supplied two AA batteries into the remote commander. 4 Put the battery cover back on the remote commander and slide it in the reverse direction of the arrow illustrated above until the cover clicks into place. ✍ If the remote commander does not operate properly, you may need to replace the batteries. When the remote commander is not going to be used for an extended period of time, remove the batteries to avoid possible damage from battery leakage.
n 57 N Using Your VAIO Computer To connect the remote sensor control ✍ If you are using a cable or satellite set-top box, you can attach the remote sensor control to the set-top box, which enables you to control the set-top box with the remote commander. 1 Plug the cable from the remote sensor control (1) (supplied with selected models only) into the INFRARED TRANSMITTER OUT jack (2) on the computer. 2 Remove the adhesive tape cover from the bottom of the remote sensor control (1).
n 58 N Using Your VAIO Computer ! Do not cover the infrared sensor when attaching the remote sensor control. The remote sensor must be visible in a line of sight with the remote commander in order to function properly.
n 59 N Using Your VAIO Computer Locating buttons on the remote commander
n 60 N Using Your VAIO Computer A Pause X button Press to pause media playback. Press again to resume playback. Stop x button Press to stop media playback or TV recording session. Forward M button Press to fast-forward media at three speeds. Skip B? button Press to move media forward, for example, one audio track, one DVD chapter, and 30 seconds of recorded TV or video. Replay ?b button Press to move media backward, for example, one audio track, one DVD chapter, and 7 seconds of TV or video.
n 61 N Using Your VAIO Computer E Guide button Press to view the TV program guide for your area. F Alphanumeric buttons Press to select specific channels or enter text. (Press ENTER or OK to activate the channel selection.) G CLEAR button Press to backspace and delete entered text. H APPLICATION SELECT button Press to switch among open applications. This button works the same as the Alt+Tab keys. I APPLICATION CLOSE button Press to close the active application window.
n 62 N Using Your VAIO Computer Controlling your computer and BRAVIA TV ("BRAVIA" Sync) If you have a Sony BRAVIA TV with the Control for HDMI function, connecting your computer and BRAVIA TV with an HDMI cable makes additional control features available with the computer's remote commander and the BRAVIA remote control. Enabling the Control for HDMI function To use additional control features, you need to enable the Control for HDMI function first.
n 63 N Using Your VAIO Computer Using the computer's remote commander to simultaneously turn on the computer and the BRAVIA TV (One-Touch Play) When your computer and BRAVIA are off, you can press one of the following buttons on the computer's remote commander to turn both on and start Windows. A Sleep button B Start button ✍ Illustrated above is the English remote commander as an example.
n 64 N Using Your VAIO Computer Using the BRAVIA remote control for Windows Media Center features You can use the remote control supplied with your BRAVIA TV for a wide variety of Windows Media Center features, including TV viewing and optical disc operations. To start Windows Media Center, press the SYNC MENU button on the remote control.
n 65 N Using Your VAIO Computer Controlling TV volume with the supplied remote commander You can change the volume on your TV with the supplied remote commander by changing the remote commander's signal setting to match with the one used by your TV manufacturer. Press and hold the OK button and press alphanumeric buttons to enter your TV manufacturer code. For example, press and hold the OK button and press the 0 and 2 buttons consecutively to enter the manufacturer code for Sony: Sony (02).
n 66 N Using Your VAIO Computer Using the Memory Stick Media Memory Stick media is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and other devices. Because it is removable, it can be used for external data storage. ✍ The Memory Stick slot is located behind the front panel door. You need to open this door before accessing the slot.
n 67 N Using Your VAIO Computer Before You Use the Memory Stick Media The Memory Stick slot on your computer can accommodate both standard- and Duo-size media and supports Memory Stick PRO and Memory Stick PRO-HG Duo formats with high speed data transfer and large data capacity capabilities. ✍ You can insert a Duo-size Memory Stick media directly into the Memory Stick slot without using a Memory Stick Duo Adaptor.
n 68 N Using Your VAIO Computer Inserting a Memory Stick Media To insert a Memory Stick media 1 Slide open the front panel door with your fingertip. 2 Locate the Memory Stick slot (page 13). 3 Hold the Memory Stick media with the arrow facing upward and pointing toward the Memory Stick slot. 4 Carefully slide the Memory Stick media into the slot until it clicks into place. The Memory Stick media is automatically detected by your system and the contents on the Memory Stick media are displayed.
n 69 N Using Your VAIO Computer To view the contents on the Memory Stick media 1 Click Start and Computer to open the Computer window. 2 Double-click the Memory Stick media icon to view the list of data files saved in the Memory Stick media. To format a Memory Stick media The Memory Stick media has been formatted in the factory default setting and is ready for use. If you want to reformat the media with your computer, follow these steps.
n 70 N Using Your VAIO Computer 5 Click Start. 6 At the confirmation prompt, click OK. The formatting process starts. ! It may take time to format the Memory Stick media depending on the media. 7 Once completed, click OK. 8 Click Close.
n 71 N Using Your VAIO Computer Removing a Memory Stick Media To remove a Memory Stick media 1 Check that the Media Access indicator light is off. 2 Firmly grasp the extended part of the Memory Stick media. 3 Carefully pull it out of the slot. ! Always remove the Memory Stick media gently, or it may pop out unexpectedly. Do not remove the Memory Stick media while the Media Access indicator light is on. If you do, you may lose data.
n 72 N Using Your VAIO Computer Using Other Memory Cards In addition to the Memory Stick slot, your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices. ✍ The SD memory card slot is located behind the front panel door. You need to open this door before accessing the slot.
n 73 N Using Your VAIO Computer Before You Use Memory Cards The SD memory card slot on your computer supports the following memory cards: ❑ SD memory card ❑ SDHC memory card ❑ MultiMediaCard (MMC) For the latest information on compatible memory cards, see Sony Support Information (page 157) to visit the appropriate support Web site. ! Your computer has been tested and found compatible only with major memory card media available as of September 2007.
n 74 N Using Your VAIO Computer Inserting a Memory Card To insert a memory card 1 Slide open the front panel door with your fingertip. 2 Locate the SD memory card slot (page 13). 3 Hold the memory card with the arrow facing upward and pointing toward the memory card slot. 4 Carefully slide the memory card into the slot until it clicks into place. Do not force the card into the slot.
n 75 N Using Your VAIO Computer Removing a Memory Card ! Do not remove a memory card while the Media Access indicator light is on. If you do, the card or its data may become damaged. To remove a memory card 1 Check that the Media Access indicator light is off. 2 Firmly grasp the extended part of the memory card. 3 Carefully pull it out of the slot.
n 76 N Using Your VAIO Computer Using the Internet To use the Internet, you need to connect an external modem device, for example a USB telephone modem, an xDSL modem, or a cable modem, to your computer. For the detailed instructions on connection setups and modem configuration, see the manual that came with your modem.
n 77 N Using Your VAIO Computer Using Wireless LAN (WLAN) Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each other through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.
n 78 N Using Your VAIO Computer The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz bandwidth. The IEEE 802.11g standard provides high-speed communications, faster than the IEEE 802.11b standard. The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz bandwidth, and provides high-speed communications of up to 54 Mbps. The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.
n 79 N Using Your VAIO Computer Connecting the Wireless LAN Antenna To use the wireless LAN functionality on your computer, you must connect the supplied wireless LAN antenna to your computer. To connect the wireless LAN antenna Screw the wireless LAN antenna cable (1) counterclockwise into the WLAN ANT port (2) on the back of your computer. ! Be sure to turn the cable plug counterclockwise so as not to damage the WLAN ANT port.
n 80 N Using Your VAIO Computer ✍ For better reception, if needed, you may mount the wireless LAN antenna to a wall using the supplied screw.
n 81 N Using Your VAIO Computer Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a LAN is created only by the wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home. ❑ If the wireless connection is initiated by the VAIO computer, channel 11 will be selected by default.
n 82 N Using Your VAIO Computer To communicate without an access point (ad-hoc) ! You cannot select the 5 GHz bandwidth, which is used for the IEEE 802.11a standard, on ad-hoc networks. The IEEE 802.11n draft standard, using the 2.4 or 5 GHz bandwidth, is not available on ad-hoc networks. 1 Turn on the WLAN switch. The Wireless LAN indicator lights up. 2 Click Start and Control Panel. 3 Click View network status and tasks under Network and Internet.
n 83 N Using Your VAIO Computer Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point (not supplied), for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a central controller for the wireless LAN. The access point coordinates transmission and reception from multiple wireless devices within a specific range.
n 84 N Using Your VAIO Computer To connect to a wireless network 1 Make sure an access point is set up. See the manual that came with your access point for more information. 2 Turn on the WLAN switch. The Wireless LAN indicator lights up. 3 Click Start and Control Panel. 4 Click View network status and tasks under Network and Internet. 5 Click Manage wireless networks. 6 Click Add. 7 Follow the on-screen instructions. ✍ For WPA-PSK or WPA2-PSK authentication, you must enter a passphrase.
n 85 N Using Your VAIO Computer Stopping Wireless LAN Communication To stop wireless LAN communication Turn off the WLAN switch. ! Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss.
n 86 N Using Peripheral Devices Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. ❑ Selecting Display Modes (page 87) ❑ Using the Multiple Monitors Function (page 88) ❑ Connecting a Universal Serial Bus (USB) Device (page 90) ❑ Connecting a Printer (page 93) ❑ Connecting an i.
n 87 N Using Peripheral Devices Selecting Display Modes You can select which display to be used as the primary monitor when two displays (TV, desktop monitor, etc.) are connected to your computer. If you want to work on both displays at the same time, see Using the Multiple Monitors Function (page 88) for more information. To select a display 1 Click Start and Control Panel. 2 Click Additional Options. 3 Click NVIDIA Control Panel. 4 Select the display setup option under Display.
n 88 N Using Peripheral Devices Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have a display connected to the HDMI OUT port and another connected to the monitor (VGA) port, two displays can function as a single desktop. You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window or a toolbar, from one display to the other.
n 89 N Using Peripheral Devices To select the Multiple Monitors mode 1 Click Start and Control Panel. 2 Click Adjust screen resolution under Appearance and Personalization. The Display Settings window appears. 3 Right-click the number 2 monitor and select Attached. 4 Click OK. At the confirmation prompt, click Yes. ✍ Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors mode.
n 90 N Using Peripheral Devices Connecting a Universal Serial Bus (USB) Device ✍ You need to slide open the front panel door to access the USB ports on the front. Connecting a USB Mouse To connect a USB mouse 1 Choose the USB port (1) you prefer to use. 2 Plug the USB mouse cable (2) into the USB port. You can now use your USB mouse (not supplied) (3).
n 91 N Using Peripheral Devices Connecting a USB Floppy Disk Drive You can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive 1 Choose the USB port (1) you prefer to use. 2 Plug the USB floppy disk drive cable (2) into the USB port. Your USB floppy disk drive (3) is now ready for use. ! When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.
n 92 N Using Peripheral Devices Disconnecting a USB floppy disk drive You can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is in Sleep mode may cause the computer to malfunction. To disconnect a USB floppy disk drive ✍ To disconnect a USB floppy disk drive when your computer is off, skip steps 1 to 8. 1 Close all programs accessing the floppy disk drive. 2 Double-click the Safely Remove Hardware icon on the taskbar.
n 93 N Using Peripheral Devices Connecting a Printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a Printer Using the USB Port You can connect a USB printer compatible with your version of Windows to the computer. ✍ You need to slide open the front panel door to access the USB ports on the front. To connect a printer using the USB port 1 Plug the power cord (1) of your printer into an AC outlet.
n 94 N Using Peripheral Devices Connecting an i.LINK Device Notes on connecting i.LINK devices ❑ Your computer is equipped with an i.LINK port, which you can use to connect to an i.LINK device, such as a digital video camcorder. ❑ The i.LINK port on your computer does not supply power to external devices generally powered by i.LINK ports. ❑ The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of the external device. ❑ The optional i.
n 95 N Using Peripheral Devices Connecting a Digital Video Camcorder ✍ The i.LINK port is located behind the front panel door. You need to open this door before accessing the port. To connect a digital video camcorder Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV In/ Out port (3) on the digital video camcorder. ✍ On Sony digital video cameras, ports labeled DV Out, DV In/Out, or i.LINK are i.LINK-compatible.
n 96 N Using Peripheral Devices Connecting to a Network (LAN) You can connect your computer to 100BASE-TX/10BASE-T-type networks with an Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port on the back of the computer and the other end to your network. For detailed settings and devices needed to connect to the network, ask your network administrator. ! Your computer has a protective sticker covering the network (Ethernet) port located on its back.
n 97 N Using Peripheral Devices ! Telephone lines cannot be connected to the network (LAN) connector on your computer. If the network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage, overheating, or fire. - Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone) - Public telephone subscriber line - PBX (private branch exchange) Do not plug a telephone cable into the network port.
n 98 N Customizing Your VAIO Computer Customizing Your VAIO Computer This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities, etc.
n 99 N Customizing Your VAIO Computer Setting the Password Use one of the BIOS functions to set the password. Once you have set the password, you will be prompted to enter the password after the VAIO logo appears to start your computer. The power-on password allows you to protect your computer from unauthorized access.
n 100 N Customizing Your VAIO Computer Adding the Power-on Password The power-on password is provided to protect your computer from unauthorized access. ! Once you have set the power-on password, you cannot start your computer without entering the password. Make sure not to forget the password. Write down your password and keep it safe and private from other people.
n 101 N Customizing Your VAIO Computer Changing/Removing the Power-on Password To change or remove the power-on password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the current password and press the Enter key. 4 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the Enter key.
n 102 N Customizing Your VAIO Computer Setting Up Your Computer with VAIO Control Center The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior. To use VAIO Control Center 1 Click Start, All Programs, and VAIO Control Center. The VAIO Control Center window appears. 2 Select the desired control item and change the settings. 3 Once finished, click OK. The setting of the desired item has been changed.
n 103 N Customizing Your VAIO Computer Using the Power Saving Mode In addition to the normal operating mode, which allows you to turn off specific devices, your computer has a distinct power saving mode called Sleep mode. Using Normal Mode This is the normal state of the computer when it is in use. To save power while not working, you can turn off a specific device such as the connected display or the hard disk drive.
n 104 N Customizing Your VAIO Computer Using Sleep Mode Sleep mode temporarily suspends the entire system operations for lower power consumption. The orange power light is on during this mode. ! Turn off your computer if you do not intend to use it for a long period of time. To activate Sleep mode Click Start, the arrow next to the Lock button, and Sleep. ✍ When your computer is in Sleep mode, you cannot insert a disc.
n 105 N Customizing Your VAIO Computer If the computer is not used for a certain period of time, it will enter Sleep mode. To modify this, you can change the Sleep mode settings. To change the Sleep mode settings 1 Click Start, Control Panel, Hardware and Sound, and Power Options. 2 Click Change plan settings under the current power plan. 3 Change the time to place the computer into Sleep mode and click Save Changes.
n 106 N Upgrading Your VAIO Computer Upgrading Your VAIO Computer Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid invalidation of the warranty during your product warranty period, we recommend that: ❑ You should contact your dealer to install a new component. ❑ You should not install it yourself, if you are not familiar with upgrading a computer. ❑ You should not touch the connectors on any component.
n 107 N Upgrading Your VAIO Computer Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in this section. Notes on adding/removing memory modules ❑ Be careful when changing memory. Improper installation of memory modules may cause damage to your system. This damage may void your manufacturer's warranty.
n 108 N Upgrading Your VAIO Computer ❑ Use the special bag delivered with the memory module or wrap the module in aluminum foil to protect it from ESD. ❑ Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your computer will result in damage to the computer and any repair costs will not be covered by the warranty.
n 109 N Upgrading Your VAIO Computer Removing and Installing a Memory Module To change or add a memory module 1 Shut down the computer and disconnect all peripheral devices. 2 Unplug the computer and wait until the computer cools down. 3 Unscrew the screws (indicated by the arrows below) on the bottom of the computer and remove the memory module compartment cover. ! When placing your computer upside down, be sure to put the computer on a soft cloth to protect it from scratches.
n 110 N Upgrading Your VAIO Computer 5 Remove the currently installed memory module as follows: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). 6 Remove the new memory module from its packaging.
n 111 N Upgrading Your VAIO Computer 7 Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any other components on the motherboard. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot.
n 112 N Upgrading Your VAIO Computer 8 Replace the memory module compartment cover and tighten the screws on the bottom of the computer. 9 Connect a power source and turn on the computer.
n 113 N Upgrading Your VAIO Computer Viewing the Amount of Memory To view the amount of memory 1 Turn on the computer. 2 Click Start, All Programs, and VAIO Control Center. The VAIO Control Center window appears. 3 Double-click the System Information icon under the System Information folder. You can view the amount of system memory. If the additional memory does not appear, repeat the whole installation procedure and restart the computer.
n 114 N Precautions Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage.
n 115 N Precautions On Using the Power Source ❑ See the online specifications to check the power operation of your model. ❑ Do not share the AC outlet with other power-consuming equipment, such as a photocopier or a shredder. ❑ You can purchase a power strip with a surge protector. This device helps prevent damage to your computer caused by sudden power surges, in an electrical storm, for example. ❑ Do not place heavy objects on the power cord. ❑ To disconnect the cord, pull it out by holding the plug.
n 116 N Precautions On Handling Your Computer ❑ Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer. ❑ If you drop a solid object or any liquid onto your computer, shut down the computer and then unplug it. You may want to have the computer checked by qualified personnel before operating it again.
n 117 N Precautions ❑ Be sure to place your computer in the flat position as it is not designed for upright placement. ❑ Provide adequate air circulation to prevent internal heat from building up. The internal heat will cause your computer to malfunction. ❑ Do not place your computer on porous surfaces such as rugs or blankets, or near material such as curtains or draperies that may block its air vents. ❑ Be sure to allow clearance of at least 2 inches (5 cm) wide on either side (1) of your computer.
n 118 N Precautions ❑ If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In this case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact an authorized Sony Service Center. To find the nearest center or agent, see Sony Support Information (page 157). ❑ Make sure you disconnect the power cord before cleaning your computer.
n 119 N Precautions On Handling Floppy Disks ❑ Do not open the shutter manually or touch the surface of the floppy disk. ❑ Keep floppy disks away from magnets. ❑ Keep floppy disks away from direct sunlight and other sources of heat. ❑ Keep floppy disks away from any liquid. Do not let them get wet. When you are not using your floppy disk, always remove it from the floppy disk drive and use a storage case. ❑ If the floppy disk comes with an adhesive label, make sure that the label is properly affixed.
n 120 N Precautions On Handling Discs ❑ Do not touch the surface of the disc. ❑ Do not drop or bend the disc. ❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: ❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc.
n 121 N Precautions On Using Headphones Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.
n 122 N Precautions On Handling Memory Stick Media ❑ Do not touch the Memory Stick media connector with your finger or metallic objects. ❑ Use only the adhesive label supplied with the Memory Stick media as a label. ❑ Do not bend, drop, or apply strong shock to the Memory Stick media. ❑ Do not disassemble or modify Memory Stick media. ❑ Do not let Memory Stick media get wet.
n 123 N Precautions On Handling the Hard Disk The hard disk drive has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock, or dust. Although the hard disk drive has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer. To avoid damaging your hard disk drive ❑ Do not subject your computer to sudden movements.
n 124 N Precautions On Updating Your Computer Confirm that the latest updates have been installed on your computer using the following software applications so that the computer can run more efficiently. To confirm that they have been installed on the computer, follow these steps for each software application: ❑ Windows Update Click Start, All Programs, and Windows Update and then follow the on-screen instructions.
n 125 N Troubleshooting Troubleshooting This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before visiting the Sony online support Web site at the following URLs: http://esupport.sony.com/EN/VAIO/ for customers in USA http://sony.ca/view/Computers_Bulletins.htm for customers in Canada http://esupport.sony.
n 126 N Troubleshooting Computer What should I do if my computer does not start? ❑ Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on. ❑ Make sure the floppy disk drive (if applicable) is empty. ❑ If your computer is plugged into a power strip or an uninterruptible power supply (UPS), make sure the power strip or UPS is plugged into a power source and turned on.
n 127 N Troubleshooting What should I do if a BIOS error appears when I turn on my computer? If the message "Press to resume, to setup" appears at the bottom of the screen, follow these steps: 1 Press the F2 key. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 2 Set the date (month/day/year). Press the Enter key. 3 Press the m key to select System Time, and then set the time (hour: minute: second).
n 128 N Troubleshooting What should I do if the power indicator lights but my screen remains blank? ❑ Make sure the proper input for your display (HDMI-compatible TV or VGA monitor) is selected. ❑ Make sure your display (HDMI-compatible TV or VGA monitor) is turned on. ❑ If your display is still blank, follow these steps: 1 Press the power button on your computer for more than four seconds to check that the power indicator goes out. Then turn on your computer again.
n 129 N Troubleshooting What should I do if my computer or software stops responding? ❑ If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application window. ❑ If the Alt+F4 keys do not work, click Start, the arrow next to the Lock button, and Shut Down to turn off your computer. ❑ If your computer does not turn off, press the Ctrl+Alt+Delete keys and click the arrow and Shut Down. If the Windows Security window appears, click Shut Down.
n 130 N Troubleshooting Why doesn't my computer enter Sleep mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep mode. To restore your computer to normal operating stability 1 Close all open programs. 2 Click Start, the arrow next to the Lock button, and Restart. 3 If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart.
n 131 N Troubleshooting What should I do if my game software does not work or it keeps crashing? ❑ Check the Web site of the game if there are any patches or updates to download. ❑ Make sure you have installed the latest video driver. ❑ On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in this case is not guaranteed.
n 132 N Troubleshooting Why doesn't my screen turn off when the time selected for the automatic turn-off action has passed? The VAIO Original Screen Saver disables the timer setting, which you can select using the Windows power options, for your screen to turn off. Select the screen saver other than the VAIO Original Screen Saver. How do I check the volume of the recovery partition? Your hard disk drive contains the recovery partition where data for the system recovery is stored.
n 133 N Troubleshooting System Security How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly. You can get important Windows updates by doing the following: ! Your computer must be connected to the Internet before you can receive updates. 1 Connect to the Internet.
n 134 N Troubleshooting How do I keep my antivirus software updated? You can keep the Symantec-Norton Application software program current with the latest updates from Symantec Corporation. To download and install the latest security update, follow these steps: For Norton Internet Security 1 Click Start, All Programs, Norton Internet Security, and Norton Internet Security. 2 Click the item to update the software on the left pane. 3 Follow the on-screen instructions to select and download updates.
n 135 N Troubleshooting Networking What should I do if my computer cannot connect to a wireless LAN access point? ❑ Connection availability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ❑ Make sure the WLAN switch is on and the Wireless LAN indicator is lit on your computer. ❑ Make sure power to the access point is on. ❑ Follow these steps to check the settings: 1 Click Start and Control Panel.
n 136 N Troubleshooting Why is the data transfer speed slow? ❑ The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed, move your computer away from obstructions or closer to any access point you may be using.
n 137 N Troubleshooting What are channels? ❑ Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. ❑ If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point.
n 138 N Troubleshooting Optical Discs Why does my computer freeze when I try to read a disc? The disc that your computer is trying to read may be dirty or damaged. Follow these steps: 1 Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer. 2 Remove the disc from the optical disc drive. 3 Check the disc for dirt or damage. If you need to clean the disc, see On Handling Discs (page 120) for instructions.
n 139 N Troubleshooting What should I do if I cannot play a disc properly on my computer? ❑ Make sure the disc is inserted into the optical disc drive with the label facing upward. ❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions. ❑ If a disc is dirty or damaged, your computer will stop responding. Follow these steps: 1 Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
n 140 N Troubleshooting 6 Double-click the desired drive. You can confirm the driver software by selecting the Driver tab, and clicking Driver Details. 7 Click OK to close the window. ❑ Make sure an adhesive label is not affixed to a disc. Adhesive labels can come off while the disc is in the optical disc drive and damage the drive or cause it to malfunction. ❑ If a region code warning appears, the disc may be incompatible with the optical disc drive.
n 141 N Troubleshooting What should I do if I cannot play Blu-ray Disc media? You may not be able to play some Blu-ray Disc contents on your computer. To play such contents, download and install the latest updates for WinDVD BD using VAIO Update. To download and install the updates on the computer, it must be connected to the Internet. For information on how to connect the computer to the Internet, see Using the Internet (page 76).
n 142 N Troubleshooting Display What should I do if my TV screen remains blank? ❑ Make sure that both power cords of your computer and TV are securely plugged into power sources. ❑ Make sure that your computer and TV are properly connected. ❑ Make sure that both your computer and TV are turned on. ❑ When two displays are connected to your computer, make sure that the display settings are correct on the other display. See Selecting Display Modes (page 87).
n 143 N Troubleshooting What should I do if the screen of my TV that is connected to the HDMI OUT port remains blank? ❑ Unplug the HDMI cable once and plug it back. ❑ Your TV may not be HDCP compliant. Be sure to use an HDCP compliant TV. ❑ When two displays are connected to your computer, make sure that the display settings are correct on the other display. See Selecting Display Modes (page 87).
n 144 N Troubleshooting How do I run Windows Aero? ! This Q & A entry applies to selected models only. To run Windows Aero, follow these steps: 1 Click Start and Control Panel. 2 Click Customize colors under Appearance and Personalization. 3 Click Open classic appearance properties for more color options. The Appearance Settings window appears. 4 Select Windows Aero from the Color scheme options on the Appearance tab. 5 Click OK.
n 145 N Troubleshooting Printing What should I do if I cannot print a document? ❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and computer. ❑ Make sure your printer is compatible with the Windows operating system installed on your computer. ❑ You may need to install the printer driver software before you use your printer. See the manual that came with your printer for more information.
n 146 N Troubleshooting Microphone What should I do if my microphone does not work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone jack on your computer. How can I prevent microphone feedback? Microphone feedback occurs when the microphone receives the sound from a sound output device, such as a speaker. To prevent this problem: ❑ Keep the microphone away from a sound output device.
n 147 N Troubleshooting Speakers What should I do if my external speakers do not work? ❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. ❑ Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound. ❑ Make sure your speakers are designed for computer use. ❑ If your speakers have a muting button, set the button to off.
n 148 N Troubleshooting What should I do if I do not hear microphone sound from my HDMI-compatible TV? Your computer is not capable of outputting audio signals from the microphone jack directly through the HDMI port. Save the audio data first to an audio file, and then play it back to output through the HDMI port.
n 149 N Troubleshooting Keyboard What should I do if the keyboard configuration is wrong? The language layout of your wireless keyboard is labeled on the packaging box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. To change the keyboard configuration, follow these steps: 1 Click Start and Control Panel. 2 Click Clock, Language, and Region, and click Regional and Language Options. 3 Change the settings as desired.
n 150 N Troubleshooting Touch Pad What should I do if the touch pad does not work? ❑ Make sure that a mouse is not connected to your computer. ❑ If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window. ❑ If the Alt+F4 keys do not work, click Start, the arrow next to the Lock button, and Restart to restart your computer.
n 151 N Troubleshooting Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: 1 Close all programs that are accessing the floppy disk drive.
n 152 N Troubleshooting Audio/Video What should I do if I cannot use my DV camcorder? If it is prompted that the i.LINK device seems to be disconnected or turned off, the i.LINK cable may not be securely plugged into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See Connecting an i.LINK Device (page 94) for more information. ✍ i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection.
n 153 N Troubleshooting What should I do if I do not hear the sound from the sound output device connected to the HDMI OUT or OPTICAL OUT port? ❑ Once you have connected a device to the HDMI OUT or OPTICAL OUT port, you need to change the device for sound output if you want to hear sound from the device. To change the sound output device, follow these steps: 1 Close all open programs. 2 Click Start and Control Panel. 3 Click Hardware and Sound. 4 Click Manage audio devices under Sound.
n 154 N Troubleshooting How do I output the Dolby Digital or DTS sound through an S/PDIF or HDMI-compatible device? To output the Dolby Digital or DTS sound from a disc through an S/PDIF or HDMI-compatible device connected to your computer, follow these steps: 1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Manage audio devices under Sound. 4 On the Playback tab, select the optical out or HDMI icon and click Properties. 5 Click the Supported Formats tab.
n 155 N Troubleshooting Memory Stick Media What should I do if I cannot use Memory Stick media, which were formatted on a VAIO computer, on other devices? You may need to reformat your Memory Stick media. Formatting Memory Stick media erases all data, including music data previously saved on it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep.
n 156 N Troubleshooting Peripherals What should I do if I cannot connect a USB device? ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to the AC outlet. ❑ Try using another USB port on your computer. The driver could be installed to the specific port you used the first time you connected the device.
n 157 N Support Options Support Options This section contains information on where to go for answers to questions about your VAIO computer and the preinstalled software. Sony Support Information See the following sources for answers in the sequence listed below. 1 VAIO Computer Documentation This on-screen User Guide (this manual) and the printed Welcome mat provide information on how to maximize your computer's capabilities and solve common problems.
n 158 N Support Options 5 VAIO Update When your computer is connected to the Internet, VAIO Update automatically notifies you when critical software and security information is posted on the support Web site. Click the VAIO Update notice to open the VAIO Support Web site and view the information.
n 159 N Support Options For customers in Latin American countries or areas Customer Information Center If you do not find the information you are looking for at our site, you may call Sony directly. In order to receive the fastest and most efficient services, have the following information readily available: 1 Your VAIO computer model You can find it at the lower right corner of the display on the notebook, and in the same place on the front panel of the CPU on the desktop.
n 160 N Support Options In order to contact a Sony technical support representative, call the following numbers: ❑ In Argentina: (011) 6770-SONY (7669) ❑ In Mexico: In Mexico City: 5002-9819 In the Mexican Republic: 01-800-759-7669 ❑ In Colombia: 01-800-550-7000 ❑ In Peru: 0-801-1-7000 or 511-6100 ❑ In Chile: 800-261-800 From mobile phones: 02-754-6333 ❑ In Venezuela: 0-800-1-SONY-00 (0-800-1-7669-00) ❑ In Panama: 800-2050 ❑ In Brazil: (11) 3677-1080
n 161 N Support Options Program Support Information Depending on the computer model and particular configuration you purchased, your computer may not include all of the software programs listed below. Contacts for Sony software products are listed below: ❑ For customers in USA Web site http://esupport.sony.com/EN/VAIO/ Telephone 888-4-SONY-PC (888-476-6972) ❑ For customers in Canada Web site http://sony.ca/view/Computers_Bulletins.
n 162 N Support Options America Online® service (Dial-Up) America Online, Inc. ❑ For customers in USA and Canada Web site http://www.aol.com AOL® Toolbar America Online, Inc. ❑ For customers in USA and Canada Web site http://help.aol.com/help AOL® Instant Messenger™ application America Online, Inc. ❑ For customers in USA and Canada Web site http://www.aim.
n 163 N Support Options Click to Disc® software Sony Electronics Inc. At the touch of a button, Click to Disc software allows you to automatically burn DVDs from a digital video (DV) device. Create DVDs by capturing video contents straight from a DV device or by importing video from stored files — and you can also edit the video. Create DVD photo albums and slide shows with picture files or by importing pictures from a digital still camera.
n 164 N Support Options InterVideo InstantON® InterVideo, Inc. ❑ For customers in USA and Canada Web site http://www.intervideo.com/jsp/Support.jsp LocationFree® Player Sony Electronics Inc. For contacts about the software, see Program Support Information (page 161). Magic-i™ Visual Effects ArcSoft, Inc. A smart and simple webcam application designed to enhance users' video chat experience through frames, effects, and themes. ❑ For customers in USA and Canada Web site http://www.arcsoft.
n 165 N Support Options 60-Day Trial Version of Microsoft® Office ! The Microsoft Office 60-Day Trial software included with this computer system is intended for evaluation purposes only. The software has been installed and you must activate the software before you can use it. Product activation procedures will be detailed during initial launch of the software; activation requires Internet access.
n 166 N Support Options 14-Day Trial Version of Napster® Napster, Inc. ❑ For customers in USA and Canada Web site http://www.napster.com Norton Internet Security™ Symantec Corporation ❑ For customers in USA and Canada Web site http://www.symantec.com/techsupp Norton 360™ All-in-One Security Symantec Corporation ❑ For customers in USA and Canada Web site http://www.symantec.com/techsupp Protector Suite QL Sony Electronics Inc.
n 167 N Support Options QuickBooks® Simple Start Intuit Inc. ❑ For customers in USA and Canada Web site http://www.intuit.com/support/ Quicken 2008 Deluxe Intuit Inc. ❑ For customers in USA and Canada Web site http://www.intuit.com/support/ Roxio® Easy Media Creator® 9 Suite Sonic Solutions ❑ For customers in USA and Canada Web site http://support.sonic.com/ SmartWi™ Connection Utility Sony Electronics Inc.
n 168 N Support Options SonicStage™ Mastering Studio software Sony Electronics Inc. Use SonicStage Mastering Studio software to record songs from analog records or cassette tapes into your computer and output them to CDs, DVDs, or audio files in WAV format. For contacts about the software, see Program Support Information (page 161). Spy Sweeper™ Webroot Software, Inc. ❑ For customers in USA and Canada Web site http://webroot.custhelp.
n 169 N Support Options VAIO® Control Center Sony Electronics Inc. VAIO Control Center provides a centralized location that gathers resources to configure your VAIO computer and view your computer's configuration and specifications. For contacts about the software, see Program Support Information (page 161). VAIO® Edit Component Sony Electronics Inc. VAIO Edit Component provides enhanced editing functionality when using Adobe® Premiere® Pro or Adobe Premiere Elements on your VAIO computer.
n 170 N Support Options VAIO Media™ software Sony Electronics Inc. VAIO Media™ software brings multimedia to your network, enabling you to share music, video, and still image files between your VAIO® computers. You can set up one or more VAIO computers as "media servers," which store your multimedia files and make them available to other compatible VAIO computers on your wired or wireless network. For contacts about the software, see Program Support Information (page 161).
n 171 N Support Options VAIO® Smart Network Sony Electronics Inc. For contacts about the software, see Program Support Information (page 161). VAIO® Touch Launcher Sony Electronics Inc. VAIO Touch Launcher allows you to run an application program or change the sound/display settings with the buttons on the launcher window. For contacts about the software, see Program Support Information (page 161). VAIO® Update 3 Sony Electronics Inc.
n 172 N Support Options VAIO® Wireless Switch Setting Utility Sony Electronics Inc. For contacts about the software, see Program Support Information (page 161). WinDVD® software for VAIO® computers InterVideo, Inc. ❑ For customers in USA and Canada Web site http://www.intervideo.com/jsp/Support.jsp Telephone 1-800-772-6735 Zoom Utility Sony Electronics Inc. The Zoom Utility will allow you to magnify a portion of the screen. For contacts about the software, see Program Support Information (page 161).
n 173 N Support Options Trademarks © 2008 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, the Sony logo, VAIO, the VAIO logo, Memory Stick, Memory Stick Duo, MagicGate, OpenMG, OpenMG X, Memory Stick PRO Duo, Memory Stick PRO, Memory Stick PRO-HG, Memory Stick Micro, M2, Memory Stick logo, Memory Stick Export, Memory Stick Import, Micro Vault, Micro Vault EX, MOTION EYE, Sony Style, DVgate, DVgate Plus, i.
n 174 N Support Options Features and specifications are subject to change without notice. All other trademarks are trademarks of their respective owners. See the online specifications to see what software is available for your model.
n © 2008 Sony Corporation
