Manual

Setup Menu

The Setup menu is used to chan e the factory preset settings, etc.

Standard J

Slandard ]

E_ :::::::::::::::::::::::::::: on

_ compu*er }

AUto J

_i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!1

Status

Language

Cooling Setting

II_NIFI

Standby lode

PowerSaving

Sets whether or not the on-screen display is displayed.

Set to "OFP' to turn ()It"tile on-screen displays except lkw the menus,

message when turning oil tt_e power, and warning messages.

Selects the language used in the menu and on-screen displays.

Available hmguages are: English, Dutch, French, Italian, German,

Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,

Chinese (Simplified Chinese), Chinese (Traditional Chinese),

Korean, Thai and Arabic.

Use this item when using the projector at high altitudes.

High: Use this setting when using tile projector at an altitude of

1,500 In or higher.

Standard: Use this setting when using the projector at normal

altitudes.

When Ihis item is set Io "High", the I_Ulnoise becomes slightly

louder since tile nUllrber ol [':ill rolatioll increases.

Lowers the power consumption in standby.

When set to "Standard" the power consumption in standby becomes

uormah

When set to "Low", the power consumption in standby mode is

lowered.

Sets the power saving mode.

When set to "On", the projector goes into power saving mode it" no

is input for 10 minutes. At that time, alter the I/(,D

signal

(On/

standby) indicator flashes, it will ligt_t in orange and the screen

becomes dark. In power saving mode, the power saving mode is

cancelled if a signal is input or any button is pressed. If you do not

want to set the projector to power saving mode, select "OIY'.