Operation Manual
42
Specifications
• When a signal other than the preset signals shown above is input, the picture may not be displayed
properly.
• For the Memory No.49*, the smart APA function and the APA key of the remote commander do
not active. Make adjustments for the input signal using the Adjust Signal... on the Signal menu.
• When an SXGA+ signal is input, the image may extend beyond the edges of the screen. In this
case, input a signal with no black edges around the image, and disconnect and reconnect the cable
or select the input signal by pressing the INPUT key.
41 1152 × 864 SXGA VESA 70 Hz 63.995 70.019 H-pos, V-pos 1472
42 SXGA VESA 75 Hz 67.500 75.000 H-pos, V-pos 1600
43 SXGA VESA 85 Hz 77.487 85.057 H-pos, V-pos 1568
44 1152 × 900 Sunmicro LO 61.795 65.960 H-neg, V-neg 1504
45 1280 × 960 SXGA VESA 60 Hz 60.000 60.000 H-pos, V-pos 1800
46 SXGA VESA 75 Hz 75.000 75.000 H-pos, V-pos 1728
47 1280 × 1024 SXGA VESA 60 Hz 63.974 60.013 H-pos, V-pos 1696
48 SXGA VESA 75 Hz 79.976 75.025 H-pos, V-pos 1688
49* SXGA VESA 85 Hz 91.146 85.024 H-pos, V-pos 1476
50 1400 × 1050 SXGA+ 60 Hz 63.981 60.020 H-neg, V-neg 1688
Memory
No.
Preset signal fH (kHz) fV (Hz) Sync SIZE
Notes