User Guide

35
GB
The SET SETTING Menu
Adjustments and Settings Using the Menu
The SET SETTING Menu
The SET SETTING menu is used for changing the settings of the projector.
Seittng items Functions Initial setting value
Smart APA The APA (Auto Pixel Alignment) automatically
adjusts “Dot Phase,” “H Size” and “Shift” in the
INPUT SETTING menu for the input signal from a
computer.
• On: When a signal is input from a computer, the
APA functions automatically so that the picture can
be seen clearly. Once the specified input signal has
been adjusted by the “Smart APA,” it will not be
readjusted even when the cable is disconnected and
connected again or the input channel is changed.
You can adjust the picture by pressing APA key on
the Remote Commander even if the “Smart APA”
set to “On.”
• Off: The APA functions when you press the APA
key on the Remote Commander.
On
Auto Input Search When set to “On,” the projector detects input signals
in the following order: Input-A/Input-B (VPL-CX75
only) /Video/S-Video. It indicates the input channel
when the power is turned on (only when “startup” in
Memory Stick Home is set to “Off” (VPL-CX75
only)) or the INPUT key is pressed.
Off
Input-A Signal
Sel.
Selects the “computer,” “component” or “video GBR”
signal input from the INPUT A connector.
Computer
Input-B Select
(VPL-CX75 only)
Select “Air Shot” or “Memory Stick” as the input
source that you want to project in the INPUT B.
Air shot
Color System Selects the color system of the input signal.
If you select “Auto,” the projector detects the color
system of the input signal automatically. If the picture
is distorted or colorless, select the color system
according to the input signal.
When the color system of the input signal is PAL60,
select “PAL.” If “Auto” is selected, the color system
cannot be detected.
Auto
SET SETTING
Input-A
Smart APA: On
Auto Input Search: Off
Input-A Signal Sel.: Computer
Input-A Select: Air Shot
Color System: Auto
Power Saving: Off
IR Receiver: Front & Rear
Illumination: On
Panel Key Lock: Off