Operation Manual

39 Setting Up the Projector
Operation and Administration using a Network
Memo
Enter a memo, if required.
Setting the date and time
This setting is required for the Regular
Report function.
Time Zone
Select the region in which you are using the
projector.
Date/Time
Set the date and time.
Time Server
Enter the address of the time server when the
time is set by a timer server.
Network Settings
Enter the information for the network
settings.
Internet Protocol (TCP/IP)
Normally, set “Obtain an IP address
automatically (DHCP).” If you select
“Specify an IP address,” set the necessary
items.
Ethernet
Select the communication speed or
communication mode from the drop-down
list. (Normally set to Auto.)
• If the IP address is changed, you will not be
able to access the network using an old IP
address.
• To reset the settings of an item back to its
factory settings, press the RESET, ENTER,
m and ENTER keys on the control panel in
order within 5 seconds with the power on,
and reset the settings depending on the
messages displayed on the screen.
Setting passwords for
“Administrator” and “User”
You can set passwords for each
“Administrator” and “User.”
The name of the “Administrator” account is
preset to “root” at the factory. It cannot be
changed.
• When you change the password, input a new
password after deleting the password
(*****) that was set.
• If you forget your password, consult with
qualified Sony personnel.
Notes
Notes