4-085-330-13(1) LCD Video Projector LCD Video Projector VPL-HS1 Operating Instructions Mode d’emploi _________________________________________FR Manual de instrucciones VPL-HS1 © 2001 Sony Corporation ___________________________________GB __________________________________ES
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Table of Contents Using a “Memory Stick” About a “Memory Stick” ..........................22 Preparing for Viewing the Still Picture Stored in a “Memory Stick” .................................23 Inserting a “Memory Stick” ..........................23 Selecting the Contents Including a Desired Still Picture ......................................................24 Precautions ............................................... 4 Viewing Still Images in Sequence — Slide Show ...................................
Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. • Unplug the unit from the wall outlet if it is not to be used for several days. • To disconnect the cord, pull it out by the plug. Never pull the cord itself. • The wall outlet should be near the unit and easily accessible.
This section describes how to install the projector and screen, how to connect the equipment from which you want to project the picture, etc. Step 1: Installing the Projector Connections and Preparations Connections and Preparations Unpacking You can obtain good picture quality even when you project the picture from the side of the screen (“SIDE SHOT”) (1 page 7). You can enjoy home entertainment with this projector in various situations.
Connections and Preparations Watching sports, etc. with your company ; Highly heated and humid Very dusty and extremely smoky Viewing images, recorded by a digital camera and stored in the “Memory Stick,” on a large screen Do not use the projector under the following conditions.
The installation distance between the projector and screen varies depending on the size of the screen. 1 Determine the installation position of the projector and screen. Screen Unit: m (feet) Screen 40 size (inches) 60 80 100 120 150 a 0.6 (2.0) 0.9 (3.0) 1.2 (3.9) 1.5 (4.9) 1.8 (5.9) 2.3 (7.5) b 0.4 (1.3) 0.6 (2.0) 0.8 (2.6) 1.0 (3.3) 1.2 (3.9) 1.6 (5.2) c 1.7 (5.6) 2.7 (8.9) 3.6 4.5 5.4 6.8 (11.8) (14.8) (17.7) (22.3) d 1.6 (5.2) 2.5 (8.2) 3.3 4.2 5.0 6.3 (10.8) (13.8) (16.
Connections and Preparations Connecting Using the Optional Signal Interface Cables Step 2: Connecting the Projector To connect with a DVD player with component video connectors/digital BS tuner Rear of the projector When making connections, be sure to do the following: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs properly; plugs that are not fully inserted often generate noise.
Rear of the projector Step 3: Adjusting the Picture Size and Position Connections and Preparations To connect with a computer Rear remote control detector 6 5,8 Signal interface cable SIC-HS30 (not supplied) Computer to monitor output Front remote control detector Adjuster stopper 6 to audio output Connecting Using the Optional Interface Unit Using the optional interface unit allows you to connect various video equipment, and to select the output to the projector or TV from the connected equipmen
Connections and Preparations 1 Plug the AC power cord into a wall outlet. The ON/STANDBY indicator lights in red and the projector goes into standby mode. ON/ STANDBY 6 Adjust the size and position of the picture to fit the screen using the zoom lever and adjuster. Move the zoom lever to adjust the picture size. Lights in red. 2 Press the [/1 (on/standby) switch to turn on the projector. The ON/STANDBY indicator lights in green. ON/ STANDBY Zoom lever Lights in green.
When projecting from the center Screen Screen Picture Picture 7 Adjust to correct the trapezoidal distortion. When projecting from the side Corrects the horizontal distortion. Press SIDE SHOT + or – so that the top edge of the picture becomes parallel to the bottom edge. If the left side is longer than the right side, press SIDE SHOT –. If you position the projector on the left side of the screen, adjust so that the left side of the picture fits the left side of the screen.
Connections and Preparations Step 4: Selecting the Menu Language You can select one of nine languages for displaying the menu and other on-screen displays. The factory default setting is English. 2 Press the [/1 (on/standby) switch to turn on the projector. The ON/STANDBY indicator lights in green. 3 Press MENU. The menu appears. The menu presently selected is shown as a yellow button. CONTRAST: BRIGHT: COLOR: HUE: SHARP: D.
Connections and Preparations 5 Press M or m to select LANGUAGE, and press , or ENTER. ENTER or VIDEO 1 SET SETTING STATUS: INPUT-A: LANGUAGE: POWER SAVING: ON COMPONENT ENGLISH OFF 6 Press M or m to select a language, and press < or ENTER. The menu changes to the selected language. ENTER or To clear the menu Press MENU.
1 Plug the AC power cord into a Projecting This section describes how to operate the projector to view the picture from the equipment connected to the projector. It also describes how to adjust the quality of the picture to suit your taste. wall outlet. The ON/STANDBY indicator lights in red and the projector goes into standby mode. ON/ STANDBY Lights in red. Projecting Projecting the Picture on the Screen 2 Press the [/1 (on/standby) switch to turn on the projector.
To view the picture from Press INPUT to display Sound is heard from the equipment connected to Video equipment connected to VIDEO INPUT on the projector VIDEO 1 AUDIO INPUT Video equipment connected to S VIDEO INPUT on the projector S-VIDEO 1 AUDIO INPUT 6 Move the focus lever to adjust the focus. Adjust to obtain sharp focus.
Selecting the Picture Viewing Mode Projecting You can select the picture viewing mode that best suits the type of program or room condition. SIDE SHOT VOLUME + – + – INPUT VIDEO MEMORY DYNAMIC STANDARD USER 1 USER 2 LIVING USER 3 VIDEO MEMORY buttons DYNAMIC STANDARD LIVING USER 1, 2 and 3 OFF OFF MENU ENTER RESET Press one of the VIDEO MEMORY buttons (DYNAMIC, STANDARD, LIVING and USER 1, 2 and 3). DYNAMIC Select for enhanced picture contrast and sharpness.
1 Press MENU. Using the Menus This section describes how to make various adjustments and settings using the menus. Operation through the Menus The menu appears. The menu presently selected is shown as a yellow button. VIDEO 1 PICTURE CTRL CONTRAST: BRIGHT: COLOR: HUE: SHARP: D.PICTURE: COLOR TEMP: COLOR SYS: VOLUME: MENU 80 50 50 50 50 OFF HIGH AUTO 30 2 Press M or m to select a menu, and press , or ENTER. The selected menu appears.
4 Make the setting or adjustment on an item. When changing the adjustment level Menu Configurations To increase the value, press M or ,. To decrease the value, press m or <. Press ENTER to restore the original screen. When changing the setting Press M or m to change the setting. Press < or ENTER to restore the original screen. The projector is equipped with four menu pages. The items that can be adjusted in each menu are described on pages 19 and 20.
Menu Items Adjustable items are limited according to the input signals. Items that cannot be adjusted are not displayed in the menu. (1 page 42) Menu Item PICTURE CONTRAST CTRL BRIGHT (brightness) COLOR Using the Menus INPUT SETTING Description The higher the setting, the greater the contrast. The lower the setting, the lower the cotrast. The higher the setting, the brighter the picture. The lower the setting, the darker the picture. The higher the setting, the greater the intensity.
Menu INPUT SETTING (continued) Using the Menus GB 20 Item VIDEO MEMORY Description You can select picture viewing mode that best suits the type of picture or the environment. OFF: Select for the setting stored in each input channel or input signal. DYNAMIC: Select for enhanced picture contrast and sharpness. STANDARD: Recommended for normal viewing condition. Also select to reduce roughness when viewing the picture with DYNAMIC. LIVING: Select for soft, film-like picture.
About the Preset Memory No. This projector has 32 types of preset data for input signals (the preset memory). When the preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture. The memory number and signal type of that signal are displayed in the INPUT SETTING menu. INPUT-A INPUT SETTING DOT PHASE: SIZE H: SHIFT: SCAN CONV: 15 800 H: 200 ON V: 30 Memory No. No.
Using a “Memory Stick” Before using a “Memory Stick” Terminal This section describes how to view the still images that are recorded by a digital camera and stored in a “Memory Stick.” You can make a slide show using the images, display an index screen of the images, etc. About a “Memory Stick” On “Memory Stick”s “Memory Stick” is a new compact, portable and versatile IC recording medium with a data capacity that exceeds a floppy disk.
Access Lamp If the access lamp is turned on or is flashing, data is being read from or written to the “Memory Stick.” Do not shake the projector or subject it to shock. Do not turn off the power of the projector or remove the “Memory Stick.” This may damage the data. Notes • To prevent data loss, make backup of data frequently. In no event will Sony be liable for any loss of data. • Unauthorized recording may be contrary to the provisions of copyright law.
Selecting the Contents Including a Desired Still Picture 2 Press M or m to select EVENT , and press ENTER. EVENT JPEG Viewer Slide Show Index Select Contents SIDE SHOT VOLUME + – + – INPUT MS SLIDE 1 APA VIDEO MEMORY DYNAMIC STANDARD USER 2 USER 1 LIVING USER 3 3 Press M or m to select “Select OFF Contents,” and press ENTER. MENU ENTER RESET 2-4 2-5 The sub menu for selecting the contents appears.
5 Press ENTER. 1 Select the contents that The selected contents name and the first two thumbnails are displayed. include a desired still picture. (1 1 page 24) EVENT JPEG Viewer 2 Press M or m to select “Slide Slide Show Index Show,” and press ENTER. The sub menu for setting the following items appears. Select Contents DCIM EVENT JPEG Viewer Slide Show Index Select Contents Execute Return Effect Off Advan.Slds.
4 Press M or m to set the selected item, and press ENTER. EVENT JPEG Viewer Slide Show Index Select Contents Displaying Index Pictures on the Full Screen Execute Return Effect Off Advan.Slds. Auto Interval 5 sec DCIM You can display 9 index pictures (thumbnail pictures) contained in the selected contents at one time. MENU ENTER 5 After setting all the items, RESET 2 press M or m to select “Execute” and press ENTER. When you set “Advan. Slids” to “Auto,” the slide show starts automatically.
When more than 9 pictures are contained in the contents You can display the pictures other than the displyed ones by pressing v (previous 9 pictures) or V (next 9 pictures) and ENTER. Displaying a FullScreen Picture To start a slide show with the index screen Press M, m, < or , to select a picture from which a slide show starts, then press MS SLIDE. Note The index pictures are sorted numerically and alphabetically up to 256 pictures. The later pictures will not be sorted.
3 Press M, m, < or , to select the picture you want to display on the full screen, and press ENTER. Rotating a Still Picture The Index menu appears. No.: 4/32 Size: 1024x768 File: SPORTS Date:7/29/2001 14:22 You can rotate a still picture in 90° steps. Full Screen Close Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 Return MENU Protect Rotate Startup Delete ENTER RESET 2-5 4 Press M or m to select “Full Screen,” and press ENTER.
3 Press M, m, < or , to select the picture you want to rotate, and press ENTER. The Index menu appears. No.: 4/32 Size: 1024x768 File: SPORTS Date:7/29/2001 14:22 Full Screen Close Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 Return Protecting an Important Still Picture You can protect a still picture to prevent it from accidental erasure. Protect Rotate Startup MENU Delete ENTER 4 Press M or m to select RESET 2-5 “Rotate,” and press ENTER.
3 Press M, m, < or , to select the picture you want to protect, and press ENTER. The Index menu appears. No.
3 Press M, m, < or , to select Setting the Startup Picture the picture you want to use as the startup picture, and press ENTER. The Index menu appears. No.
4 Press M or m to select the item used for startup picture, and press ENTER. Original: Select to use the original picture stored in the projector. This is the factory setting. Custom: Select to use the picture registered in the index screen and stored in the “Memory Stick.” (1 page 30) Off: Select when you do not set the startup. 2 Press M or m to select “Index,” and press ENTER. The index pictures of the selected contents are displayed.
Initializing a “Memory Stick” 3 Press ENTER again. MEMORY STICK Format Execute Return When a “Memory Stick” cannot be used, initialize it by the projector. All the data stored in a “Memory Stick” is cleared when the “Memory Stick” is initialized. 4 Press M or m to select SIDE SHOT VOLUME + – + – INPUT MS SLIDE 1 5 Press M to start initializing. APA VIDEO MEMORY DYNAMIC STANDARD USER 1 USER 2 “Execute,” and press ENTER.
Others This section describes how to solve the problems, how to replace a lamp and air filter, etc. Troubleshooting Symptom Cause and Remedy The power is not turned on. • The power has been turned off and on with the [/ 1 (on/standby) switch at a short interval. c Wait for about one minute before turning on the power (1 page 15). • The lamp cover is detached. c Close the lamp cover securely (1 page 38). • The air filter cover is detached. c Close the air filter cover securely (1 page 39). No picture.
Symptom Cause and Remedy The picture flickers. • DOT PHASE in the INPUT SETTING menu has not been adjusted properly. c Adjust DOT PHASE in the INPUT SETTING menu properly (1 page 19). On-screen display does not appear. • STATUS in the SET SETTING menu is set to OFF. c Set STATUS in the SET SETTING menu to ON (1 page 20). No sound. • Cable is disconnected or the connections are wrong. c Check that the proper connections have been made (1 pages 8 and 9). • VOLUME setting is not correct.
Indicators The LAMP/COVER or TEMP/FAN indicator on the control panel lights up or flashes if there is any trouble with your projector. LAMP/ COVER TEMP/ FAN POWER SAVING ON/ STANDBY TEMP/FAN Indicator LAMP/COVER Indicator Indicator Meaning and Remedy LAMP/COVER flashes. • The lamp cover or the air filter cover is detached. c Attach the cover securely (1 pages 38 and 39). LAMP/COVER lights up. • The lamp has reached the end of its life. c Replace the lamp (1 page 38).
Caution Messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning and Remedy NO INPUT • No input signal c Check connections (1 page 8). Not applicable! • You have pressed the wrong button. c Press the appropriate button. File error • In the sub menu for selecting the contents when using a “Memory Stick,” the presently selected contents name consists of more than 66 characters (“/” included). c Reenter the name with less than 66 characters.
3 Open the lamp cover by loosening a screw with the Philips screwdriver. Replacing the Lamp The lamp used for the light source has a certain life. When the lamp dims, the color balance of the picture becomes strange, or “Please replace the LAMP.” appears on the screen, the lamp is exhausted. Replace the lamp with a new one (not supplied). Use LMP-H120 Projector Lamp as the replacement lamp. 4 Loosen the two screws on the lamp unit with the Philips screwdriver. Pull out the lamp unit by the handle.
Notes • Do not put your hands into the lamp replacement spot, or not fall any liquid or object into it to avoid electrical shock or fire. • Be sure to use the LMP-H120 Projector Lamp for replacement. If you use lamps other than LMP-H120, the projector may cause a malfunction. • Be sure to turn off the projector and unplug the power cord before replacing the lamp. 3 Push the knob on the filter cover to remove the filter cover.
Specifications System Projection system 3 LCD panels, 1 lens, projection system LCD panel 0.7-inch TFT LCD panel, 1,440,000 pixels (480,000 pixels × 3) Lens 1.2 times zoom lens (manual) Lamp 120 W UHP type Projection picture size Range: 40 to 150 inches (measured diagonally) Color system NTSC3.58/PAL/SECAM/NTSC4.
Design and specifications are subject to change without notice. When projecting a computer’s signal or data stored in a “Memory Stick” Unit: m (feet) Optional accesories Signal interface unit IFU-HS1 Projector stand SU-HS1 Signal interface cable SIC-HS10 (5 m) SIC-HS20 (5 m) SIC-HS30 (5 m) SIC-HS40 (5 m) Projector Lamp LMP-H120 (for replacement) Air filter PK-HS1FL (for replacement) Projection Distances for a 720p format signal, computer’s signal, etc.
Input signals and adjustable/setting items Some of the items in the menus cannot be adjusted depending on the input signal. PICTURE CTRL menu Input signal Item Video or S video (Y/ C) Component Video GBR Computer/MS CONTRAST z z z z BRIGHT z z z z COLOR z (except for B & W) z z – HUE z (NTSC3.58/4.43 only, except for B & W) z z – SHARP z z z – RGB ENHANCER – – – z D.
Preset Signals Memory No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 43 44 45 47 48 50 Preset signal Video 60 Hz Video 50 Hz 15k RGB/Component 60 Hz 15k RGB/Component 50 Hz fH (kHz) fV (Hz) 15.734 59.940 15.625 50.000 15.734 59.940 15.625 50.
Location of Controls Front You can use the buttons on the control panel with the same names as those on the remote control to operate the projector.
Rear Speaker Rear remote control detector Adjuster (1 1 page 10) Lamp cover (bottom) (1 1 page 38) S VIDEO INPUT connector (mini DIN 4-pin)/VIDEO INPUT jack (phono type) (1 1 page 8) AUDIO L/R jacks (phono type) (1 1 page 8) ~ AC IN socket (MONO) S VIDEO VIDEO L AUDIO R INPUT PJ MULTI ~ AC IN PJ MULTI INPUT connector (32-pin multi) (1 1 page 8) Others Location of Controls 45 GB
Remote control Infrared transmitter LIGHT button Illuminates the buttons on the remote control.
H Index A Adjuster ............................................. 10 Adjusting focus ....................................... 10, 15 picture size and position .............. 9 the picture ............................. 19, 21 trapezoidal distortion ................ 11 volume ......................................... 15 zoom ...................................... 10, 15 Air filter ............................................. 39 ASPECT ............................................ 19 B BRIGHT ................
$9(57,66(0(17 $ILQ G¶pYLWHU WRXW ULVTXH G¶LQFHQGLH RX G¶pOHFWURFXWLRQ Q¶H[SRVH] SDV FHW DSSDUHLO j OD SOXLH RX j O¶KXPLGLWp $ILQ G¶pYLWHU WRXW ULVTXH G¶pOHFWURFXWLRQ Q¶RXYUH] SDV OH FKkVVLV &RQILH] O¶HQWUHWLHQ XQLTXHPHQW j XQ SHUVRQQHO TXDOLILp 3RXU OHV XWLOLVDWHXUV DX &DQDGD &HW DSSDUHLO QXPpULTXH GH OD FODVVH % HVW FRQIRUPH j OD QRUPH 10% GX &DQDGD /D SULVH GRLW rWUH SUqV GH O¶DSSDUHLO HW IDFLOH G¶DFFqV )5
7DEOH GHV 0DWLHUHV 5pJODJH GH OD TXDOLWp GH O¶LPDJH G¶XQ VLJQDO HQ SURYHQDQFH G¶XQ RUGLQDWHXU 8WLOLVDWLRQ G¶XQ ³0HPRU\ 6WLFN´ ,QIRUPDWLRQV UHODWLYHV DX[ FDUWHV ³0HPRU\ 6WLFN´ 3UpFDXWLRQV 5DFFRUGHPHQWV HW SUpSDUDWLIV 'pEDOODJH (WDSH ,QVWDOODWLRQ GX SURMHFWHXU $YDQW O¶LQVWDOODWLRQ GX SURMHFWHXU
3UpFDXWLRQV 6pFXULWp $VVXUH] YRXV TXH OD WHQVLRQ GH VHUYLFH GH YRWUH DSSDUHLO HVW LGHQWLTXH j OD WHQVLRQ VHFWHXU ORFDOH 6L GX OLTXLGH RX XQ REMHW TXHOFRQTXH YHQDLW j SpQpWUHU GDQV OH FKkVVLV GpEUDQFKH] O¶DSSDUHLO HW IDLWHV OH YpULILHU SDU XQ WHFKQLFLHQ TXDOLILp DYDQW GH OH UHPHWWUH HQ VHUYLFH 'pEUDQFKH] O¶DSSDUHLO GH OD SULVH PXUDOH VL YRXV Q¶DYH] SDV O¶LQWHQWLRQ G¶XWLOLVHU OH SURMHFWHXU SHQGDQW SOXVLHXUV MRXUV 3RXU GpEUDQFKHU OH FRUGRQ VDLVLVVH] OH SDU OD ILFKH 1H WLUH] MDPDLV VXU O
&HWWH VHFWLRQ LQGLTXH FRPPHQW LQVWDOOHU OH SURMHFWHXU HW O¶pFUDQ FRPPHQW UDFFRUGHU O¶DSSDUHLO j SDUWLU GXTXHO YRXV VRXKDLWH] SURMHWHU O¶LPDJH HWF 'pEDOODJH $VVXUH] YRXV TXH OH FDUWRQ G¶HPEDOODJH FRQWLHQW OHV pOpPHQWV VXLYDQWV (WDSH ,QVWDOODWLRQ GX SURMHFWHXU 5DFFRUGHPHQWV HW SUpSDUDWLIV 5DFFRUGHPHQWV HW SUpSDUDWLIV 9RXV SRXYH] REWHQLU XQH ERQQH TXDOLWp GH O¶LPDJH PrPH ORUVTXH OD SURMHFWLRQ GH O¶LPDJH V¶HIIHFWXH SDU OH F{Wp GH O¶pFUDQ ³6,'( 6+27´ 1 SDJH &H SURMHFWHXU YRXV SHUPH
5DFFRUGHPHQWV HW SUpSDUDWLIV 5HJDUGH] OH VSRUW HWF DYHF YRV DPLV ; ([SRVLWLRQ j OD FKDOHXU HW j O¶KXPLGLWp (QGURLW WUqV SRXVVLpUHX[ 9LVXDOLVH] GHV LPDJHV HQUHJLVWUpHV j O¶DLGH G¶XQ DSSDUHLO SKRWR QXPpULTXH HW VWRFNpHV GDQV OH ³0HPRU\ 6WLFN´ VXU pFUDQ JpDQW 1¶XWLOLVH] SDV OH SURMHFWHXU GDQV OHV VLWXDWLRQV VXLYDQWHV ,QFOLQDLVRQ GH O¶DSSDUHLO HQ GHKRUV GHV OLPLWHV GX VXSSRUW UpJODEOH 'pJDJH] OHV RULILFHV GH YHQWLODWLRQ $YDQW O¶LQVWDOODWLRQ GX SURMHFWHXU 1¶LQVWDOOH] SDV OH SURMHFWHXU GDQV OH
/D GLVWDQFH G¶LQVWDOODWLRQ HQWUH OH SURMHFWHXU HW O¶pFUDQ YDULH VXLYDQW OD WDLOOH GH O¶pFUDQ 'pWHUPLQDWLRQ GH OD SRVLWLRQ G¶LQVWDOODWLRQ GX SURMHFWHXU HW GH O¶pFUDQ (FUDQ D E F G 8QLWp P SLHGV 7DLOOH G¶pFUDQ SRXFHV D E F G 3URMHFWLRQ SDU
5DFFRUGHPHQWV HW SUpSDUDWLIV (WDSH 5DFFRUGHPHQW GX SURMHFWHXU /RUV GH OD UpDOLVDWLRQ GHV UDFFRUGHPHQWV YHXLOOH] UHVSHFWHU OHV FRQVLJQHV VXLYDQWHV 0HWWH] WRXV OHV DSSDUHLOV KRUV WHQVLRQ DYDQW WRXW UDFFRUGHPHQW 8WLOLVH] OHV FkEOHV DSSURSULpV SRXU FKDTXH UDFFRUGHPHQW %UDQFKH] FRUUHFWHPHQW OHV ILFKHV GHV FkEOHV GHV ILFKHV LQFRPSOqWHPHQW HQILFKpHV VRQW VRXYHQW j O¶RULJLQH GH SDUDVLWHV 3RXU GpEUDQFKHU XQ FkEOH VDLVLVVH] OH SDU OD ILFKH QH WLUH] SDV VXU OH FkEOH SURSUHPHQW GLW /RUVT
$UULqUH GX SURMHFWHXU 5DFFRUGHPHQW j O¶DLGH GX SpULSKpULTXH G¶LQWHUIDFH HQ RSWLRQ /¶XWLOLVDWLRQ GX SpULSKpULTXH G¶LQWHUIDFH HQ RSWLRQ YRXV SHUPHW GH UDFFRUGHU SOXVLHXUV DSSDUHLOV YLGpR HW GH WUDQVIpUHU OD VRUWLH VXU OH SURMHFWHXU RX OD WpOpYLVLRQ j SDUWLU GH O¶DSSDUHLO UDFFRUGp HQ DSSX\DQW WRXW VLPSOHPHQW VXU OD WRXFKH 5DFFRUGHPHQWV HW SUpSDUDWLIV 5DFFRUGHPHQW DYHF XQ DPSOLILFDWHXU $9 $UULqUH GX SURMHFWHXU &kEOH G¶LQWHUIDFH VLJQDO 6,& +6 QRQ IRXUQL YHUV OD VRUWLH YLGpR FRPSRVDQW < &% 3%
5DFFRUGHPHQWV HW SUpSDUDWLIV (WDSH 5pJODJH GH OD WDLOOH HW GX SRVLWLRQQHPHQW GH O¶LPDJH %UDQFKH] OH FRUGRQ G¶DOLPHQWDWLRQ VHFWHXU GDQV XQH SULVH PXUDOH /¶LQGLFDWHXU 21 67$1'%< V¶DOOXPH HQ URXJH HW OH SURMHFWHXU SDVVH HQ PRGH GH YHLOOH ON/ STANDBY (FODLUDJH URXJH 'pWHFWHXU GH WpOpFRPPDQGH DUUHLqUH $SSX\H] VXU OD WRXFKH [ 1 PDUFKH YHLOOH SRXU PHWWUH OH SURMHFWHXU VRXV WHQVLRQ /¶LQGLFDWHXU 21 67$1'%< V¶DOOXPH HQ YHUW 'pWHFWHXU GH WpOpFRPPDQGH DYDQW ON/ STANDBY %XWpH GH
(IIHFWXH] XQH PLVH DX SRLQW DSSUR[LPDWLYH j O¶DLGH GX OHYLHU GH PLVH DX SRLQW 5DFFRUGHPHQWV HW SUpSDUDWLIV 9RXV SRXYH] GpSODFHU OH SURMHFWHXU j OD YHUWLFDOH HW j O¶KRUL]RQWDOH GDQV OHV OLPLWHV VXLYDQWHV -XVTX¶j GDQV FKDTXH GLUHFWLRQ SRXU O¶DQJOH KRUL]RQWDO /HYLHU GH PLVH DX SRLQW 5pJOH] OD WDLOOH HW OH SRVLWLRQQHPHQW GH O¶LPDJH DX[ GLPHQVLRQV GH O¶pFUDQ j O¶DLGH GX OHYLHU GH ]RRP HW GX VXSSRUW UpJODEOH -XVTX¶j GDQV FKDTXH GLUHFWLRQ SRXU O¶DQJOH -XVTX¶j GDQV FKDTXH GL
5DFFRUGHPHQWV HW SUpSDUDWLIV 3URMHFWLRQ SDU OH F{Wp (FUDQ ,PDJH LQIpULHXU 6L OH F{Wp JDXFKH HVW SOXV ORQJ TXH OH GURLW DSSX\H] VXU 6,'( 6+27 ± 3URMHFWLRQ SDU OH FHQWUH ,PDJH (FUDQ 8WLOLVH] 6,'( 6+27 VL OH F{Wp GURLW HVW SOXV ORQJ 3RXU FRUULJHU OD GLVWRUVLRQ DYHF HQFRUH SOXV GH SUpFLVLRQ DSSX\H] VXU M RX m 6L YRXV LQVWDOOH] OH SURMHFWHXU j JDXFKH GH O¶pFUDQ HIIHFWXH] OH UpJODJH GH VRUWH TXH OH F{Wp JDXFKH GH O¶LPDJH WLHQQH VXU OD SDUWLH JDXFKH GH O¶pFUDQ /RUVTXH OH SURMHFWHXU HVW L
$SSX\H] VXU OD WRXFKH [ 1 PDUFKH YHLOOH SRXU PHWWUH OH SURMHFWHXU VRXV WHQVLRQ /¶LQGLFDWHXU 21 67$1'%< V¶DOOXPH HQ YHUW 9RXV SRXYH] VpOHFWLRQQHU O¶XQH GHV QHXI ODQJXHV GH PHQX HW G¶DIILFKDJH VXU pFUDQ /H UpJODJH SDU GpIDXW HVW O¶DQJODLV $SSX\H] VXU 0(18 /¶pFUDQ GH PHQX V¶DIILFKH /H PHQX DFWXHOOHPHQW VpOHFWLRQQp HVW LQGLTXp SDU XQ ERXWRQ MDXQH VIDEO 1 PICTURE CTRL SIDE SHOT VOLUME + – + – USER 2 LIVING USER 3 OFF MENU ENTER MENU 80 50 50 50 50 OFF HIGH AUTO 30 INPUT
5DFFRUGHPHQWV HW SUpSDUDWLIV $SSX\H] VXU M RX m SRXU VpOHFWLRQQHU /$1*8$*( HW DSSX\H] VXU , RX (17(5 ENTER RX VIDEO 1 SET SETTING STATUS: INPUT-A: LANGUAGE: POWER SAVING: ON COMPONENT ENGLISH OFF $SSX\H] VXU M RX m SRXU VpOHFWLRQQHU XQH ODQJXH HW DSSX\H] VXU < RX (17(5 /D ODQJXH GX PHQX HVW UHPSODFpH SDU FHOOH TXH YRXV DYH] VpOHFWLRQQpH ENTER RX 3RXU IDLUH GLVSDUDvWUH OH PHQX $SSX\H] VXU 0(18 )5 (WDSH 6pOHFWLRQ GH OD ODQJXH GH PHQX
3URMHFWLRQ &HWWH VHFWLRQ LQGLTXH FRPPHQW XWLOLVHU OH SURMHFWHXU SRXU YLVLRQQHU O¶LPDJH j SDUWLU G¶XQ DSSDUHLO UDFFRUGp DX SURMHFWHXU (OOH LQGLTXH pJDOHPHQW FRPPHQW UpJOHU OD TXDOLWp GH O¶LPDJH j YRWUH FRQYHQDQFH %UDQFKH] OH FRUGRQ G¶DOLPHQWDWLRQ VHFWHXU GDQV XQH SULVH PXUDOH /¶LQGLFDWHXU 21 67$1'%< V¶DOOXPH HQ URXJH HW OH SURMHFWHXU SDVVH HQ PRGH GH YHLOOH ON/ STANDBY (FODLUDJH URXJH $SSX\H] VXU OD WRXFKH [ 1 PDUFKH YHLOOH SRXU PHWWUH OH SURMHFWHXU VRXV WHQVLRQ 3URMHFWLRQ 3URMHFWLR
3RXU YLVLRQQHU O¶LPDJH GHSXLV $SSX\H] VXU ,1387 SRXU DIILFKHU 8Q VLJQDO VRQRUH HVW pPLV SDU O¶DSSDUHLO UDFFRUGp j 5pJOHU SRXU REWHQLU XQH LPDJH QHWWH 3URMHFWLRQ $SSDUHLO YLGpR UDFFRUGp DX 9,'(2 FRQQHFWHXU G¶HQWUpH 9,'(2 VXU OH SURMHFWHXU $8',2 ,1387 $SSDUHLO YLGpR UDFFRUGp DX 6 9,'(2 FRQQHFWHXU G¶HQWUpH 6 9,'(2 VXU OH SURMHFWHXU $8',2 ,1387 5*% DSSDUHLO FRPSRVDQW (17 $ UDFFRUGp DX FRQQHFWHXU G¶HQWUpH 3- 08/7, SDU O¶LQWHUPpGLDLUH GX FkEOH G¶LQWHUIDFH VLJQDO HQ RSWLRQ RX
6pOHFWLRQ GX PRGH GH YLVXDOLVDWLRQ G¶LPDJH SIDE SHOT VOLUME + – + – INPUT VIDEO MEMORY USER 1 USER 2 LIVING USER 3 7RXFKHV 9,'(2 0(025< '<1$0,& 67$1'$5' /,9,1* 86(5 HW 2)) OFF MENU ENTER 86(5 HW XWLOLVDWHXU HW 9RXV DYH] OD SRVVLELOLWp GH UpJOHU OD TXDOLWp GH O¶LPDJH j YRWUH FRQYHQDQFH HW G¶HQUHJLVWUHU FHV SDUDPqWUHV GDQV OD PpPRLUH GX SURMHFWHXU TXH YRXV DXUH] FKRLVLH $SSX\H] VXU O¶XQH GHV WRXFKHV 86(5 RX SXLV UpJOH] O¶LPDJH j SDUWLU GHV PHQXV /HV SDUDPqW
8WLOLVDWLRQ GHV PHQXV &HWWH VHFWLRQ LQGLTXH FRPPHQW HIIHFWXHU GLYHUV DMXVWHPHQWV HW UpJODJHV j O¶DLGH GHV PHQXV )RQFWLRQQHPHQW j O¶DLGH GHV PHQXV $SSX\H] VXU 0(18 /¶pFUDQ GH PHQX V¶DIILFKH /H PHQX DFWXHOOHPHQW VpOHFWLRQQp HVW LQGLTXp SDU XQ ERXWRQ MDXQH CONTRASTE: LUMIERE: COULEUR: TEINTE: NETTETE: IMAGE D.
3URFpGH] DX UpJODJH RX j O¶DMXVWHPHQW G¶XQ SDUDPqWUH /RUV GH OD PRGLILFDWLRQ G¶XQ QLYHDX GH UpJODJH 3RXU DXJPHQWHU OD YDOHXU DSSX\H] VXU M RX , 3RXU UpGXLUH OD YDOHXU DSSX\H] VXU m RX < $SSX\H] VXU (17(5 SRXU UHYHQLU j O¶pFUDQ G¶RULJLQH /RUV GH OD PRGLILFDWLRQ GX UpJODJH $SSX\H] VXU M RX m SRXU PRGLILHU OH UpJODJH $SSX\H] VXU < RX (17(5 SRXU UHYHQLU j O¶pFUDQ G¶RULJLQH VIDEO 1 REGLAGE ON COMPOSANT FRANCAIS ON ENTER RX /H SURMHFWHXU SRVVqGH TXDWUH SDJHV GH PHQX /HV SDUDPqWUHV SRXYDQW rWU
3DUDPqWUHV GX PHQX /HV SDUDPqWUHV UpJODEOHV VRQW OLPLWpV HQ IRQFWLRQ GHV VLJQDX[ G¶HQWUpH /HV SDUDPqWUHV QH SRXYDQW SDV rWUH PRGLILpV Q¶DSSDUDLVVHQW SDV GDQV OH PHQX 1 SDJH 8WLOLVDWLRQ GHV PHQXV )5 0HQX 3DUDPqWUH 'HVFULSWLRQ &75/ ,0$*( &2175$67( 3OXV OD YDOHXU GH UpJODJH HVW pOHYpH SOXV OH FRQWUDVWH HVW LPSRUWDQW 3OXV OD YDOHXU GH UpJODJH HVW EDVVH SOXV OH FRQWUDVWH HVW IDLEOH /80,(5( OXPLQRVLWp 3OXV OD YDOHXU GH UpJODJH HVW pOHYpH SOXV OD OXPLQRVLWp HVW LPSRUWDQWH 3OXV OD YD
0HQX 3DUDPqWUH 'HVFULSWLRQ 5(*/ (175(( 3+$6( /RUVTX¶XQ VLJQDO HQ SURYHQDQFH G¶XQ RUGLQDWHXU HVW HQWUp UpJOH] O¶LPDJH SRXU TX¶HOOH VRLW SOXV FODLUH DSUqV DYRLU DMXVWp O¶LPDJH HQ DSSX\DQW VXU OD WRXFKH $3$ $03/ + /RUVTX¶XQ VLJQDO HQ SURYHQDQFH G¶XQ RUGLQDWHXU HVW HQWUp UpJOH] OD GLPHQVLRQ KRUL]RQWDOH GH O¶LPDJH 3OXV OD YDOHXU GH UpJODJH HVW pOHYpH SOXV O¶LPDJH HVW ODUJH 3OXV OD YDOHXU GH UpJODJH HVW EDVVH SOXV O¶LPDJH HVW pWURLWH '(3/ GpSODFHPHQW 3OXV OD YDOHXU GH + KRUL]RQWDO DXJPH
0HQX 3DUDPqWUH 5(*/$*( (7$7 8WLOLVDWLRQ GHV PHQXV )5 5(*/ ,167$/ 'HVFULSWLRQ 5pJOH] VXU 2)) SRXU VXSSULPHU OHV PHVVDJHV DIILFKpV j O¶pFUDQ DXWUHV TXH OHV PHQXV OHV PHVVDJHV GH PLVH KRUV WHQVLRQ GH O¶DSSDUHLO HW OHV PHVVDJHV G¶DYHUWLVVHPHQW 3RXU YLVXDOLVHU WRXV OHV PHVVDJHV DIILFKpV VXU pFUDQ UpJOH] VXU 21 (17 $ 6pOHFWLRQQH O¶HQWUpH GH VLJQDO GX FRQQHFWHXU 3- 08/7, 25',1$7(85 ,QMHFWH OH VLJQDO HQ SURYHQDQFH G¶XQ RUGLQDWHXU &20326$17 ,QMHFWH OH VLJQDO GH FRPSRVDQW RX OH VLJQDO
$ SURSRV GX Q GH PpPRLUH GH SUpVpOHFWLRQ &H SURMHFWHXU HVW GRWp GH W\SHV GH GRQQpHV GH SUpVpOHFWLRQ SRXU OHV VLJQDX[ G¶HQWUpH OD PpPRLUH GH SUpVpOHFWLRQ /H SURMHFWHXU GpWHFWH DXWRPDWLTXHPHQW OH W\SH GH VLJQDO HW UpFXSqUH OHV LQIRUPDWLRQV UHODWLYHV DX VLJQDO GDQV OD PpPRLUH GH SUpVpOHFWLRQ ORUVTXH OH VLJQDO GH SUpVpOHFWLRQ HVW HQWUp /H QXPpUR GH PpPRLUH HW OH W\SH GH VLJQDO GH FH VLJQDO VRQW DIILFKpV GDQV OH PHQX 5(*/ (175(( ENT.
8WLOLVDWLRQ G¶XQ ³0HPRU\ 6WLFN´ &HWWH VHFWLRQ LQGLTXH FRPPHQW YLVLRQQHU OHV j O¶DLGH G¶XQ DSSDUHLO SKRWR QXPpULTXH HW VWRFNpV GDQV XQH FDUWH ³0HPRU\ 6WLFN´ 9RXV SRXYH] UpDOLVHU XQ GLDSRUDPD j SDUWLU GHV ILFKLHUV DIILFKHU XQ pFUDQ G¶LQGH[ GX ILFKLHU HWF ,QIRUPDWLRQV UHODWLYHV DX[ FDUWHV ³0HPRU\ 6WLFN´ ,QIRUPDWLRQV UHODWLYHV DX[ FDUWHV ³0HPRU\ 6WLFN´ 8WLOLVDWLRQ G¶XQ ³0HPRU\ 6WLFN´ )5 /H ³0HPRU\ 6WLFN´ HVW XQ QRXYHDX VXSSRUW G¶HQUHJLVWUHPHQW ,& H[WUrPHPHQW FRPSDFW IDFLOH j WUDQVSRUWHU
$ SURSRV GX IRUPDWDJH GHV ³0HPRU\ 6WLFN´ /HV ³0HPRU\ 6WLFN´ VRQW IRUPDWpV GDQV XQ IRUPDW VWDQGDUG VSpFLILTXH j OHXU VRUWLH G¶XVLQH 1RXV YRXV UHFRPPDQGRQV GH IRUPDWHU OHV ³0HPRU\ 6WLFN´ VXU FHW DSSDUHLO $YHUWLVVHPHQW FRQFHUQDQW OH IRUPDWDJH GHV ³0HPRU\ 6WLFN´ VXU XQ RUGLQDWHXU 3UHQH] ELHQ HQ FRPSWH OHV SRLQWV VXLYDQWV ORUV GX IRUPDWDJH GH ³0HPRU\ 6WLFN´ VXU XQ RUGLQDWHXU SDU H[HPSOH VXU FHOXL TXH YRXV XWLOLVH] /H IRQFWLRQQHPHQW GHV ³0HPRU\ 6WLFN´ IRUPDWpV VXU XQ RUGLQDWHXU Q¶HVW SDV JDUDQWL VXU
6pOHFWLRQ GX FRQWHQX FRPSUHQDQW XQH LPDJH IL[H GpVLUpH $SSX\H] VXU M RX m SRXU VpOHFWLRQQHU e9e1 HW DSSX\H] VXU (17(5 ÉVÉN. Visualisateur JPEG Diaporama Index SIDE SHOT VOLUME + – + – INPUT MS SLIDE Sél. contenu APA VIDEO MEMORY DYNAMIC STANDARD USER 1 USER 2 LIVING USER 3 OFF MENU ENTER RESET $SSX\H] VXU ,1387 SRXU VpOHFWLRQQHU 06 8WLOLVDWLRQ G¶XQ ³0HPRU\ 6WLFN´ /D IRQFWLRQ 06 KRPH V¶DIILFKH YHUV OH KDXW ÉVÉN.
$SSX\H] VXU M RX m SRXU VpOHFWLRQQHU OH FRQWHQX TXH YRXV VRXKDLWH] XWLOLVHU SRXU OH GLDSRUDPD HW DSSX\H] VXU (17(5 6L YRXV YRXOH] VpOHFWLRQQHU XQ GRVVLHU DXWUH TXH FHX[ DIILFKpV GDQV OH PHQX VpOHFWLRQQH] v RX V HW DSSX\H] VXU (17(5 $SSX\H] VXU (17(5 /H QRP GX FRQWHQX VpOHFWLRQQp HW OHV GHX[ SUHPLqUHV YLJQHWWHV V¶DIILFKHQW $IILFKDJH G¶LPDJHV IL[HV GDQV XQ RUGUH VSpFLILTXH ± 'LDSRUDPD 9RXV SRXYH] XWLOLVHU OH GLDSRUDPD HQ XWLOLVDQW GHV LPDJHV IL[HV FRPSDWLEOH '&) DX IRUPDW -3(* HQUHJL
$SSX\H] VXU M RX m SRXU VpOHFWLRQQHU ³'LDSRUDPD´ HW DSSX\H] VXU (17(5 /H VRXV PHQX GH FRQILJXUDWLRQ GHV SDUDPqWUHV VXLYDQWV V¶DIILFKH $SSX\H] VXU M RX m SRXU HQUHJLVWUHU OH SDUDPqWUH VpOHFWLRQQp HW DSSX\H] VXU (17(5 ÉVÉN. ÉVÉN. Visualisateur JPEG Visualisateur JPEG Diaporama Diaporama Index Sél. contenu Exécuter Index Retour Effet Désactivé Diapo avan. Auto Intervalle 1 sec Sél. contenu Exécuter Retour Effet Désactivé Diapo avan.
$IILFKDJH G¶LPDJHV LQGH[pHV VXU pFUDQ FRPSOHW $SSX\H] VXU M RX m SRXU VpOHFWLRQQHU ³,QGH[´ HW DSSX\H] VXU (17(5 /¶pFUDQ G¶LQGH[ DSSDUDvW HW LPDJHV LQGH[pHV GX FRQWHQX VpOHFWLRQQp V¶DIILFKHQW 9RXV SRXYH] DIILFKHU LPDJHV LQGH[pHV YLJQHWWHV G¶XQ FRQWHQX VpOHFWLRQQp HQ XQH VHXOH IRLV Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 MENU ENTER RESET 6L OH FRQWHQX FRPSWH SOXV GH LPDJHV 9RXV SRXYH] DIILFKHU GHV LPDJHV DXWUHV TXH FHOOHV DFWXHOOHPHQW j O¶
$IILFKDJH GX PHQX ,QGH[ $SSX\H] VXU M m < RX , SRXU VpOHFWLRQQHU XQH LPDJH HW DSSX\H] VXU (17(5 /H PHQX LQGH[ GH O¶LPDJH VpOHFWLRQQpH V¶DIILFKH &H PHQX YRXV SHUPHW G¶HIIHFWXHU SOXVLHXUV UpJODJHV SRXU FKDTXH LPDJH 1 SDJHV j 'DWH G¶HQUHJLVWUHPHQW GH O¶LPDJH 1RP GRQQp j FKDTXH LPDJH FDUDFWqUHV DOSKDQXPpULTXHV XQLTXHPHQW $IILFKDJH G¶XQH LPDJH VXU pFUDQ FRPSOHW 9RXV SRXYH] SURMHWHU XQH GHV LPDJHV LQGH[pHV VXU pFUDQ FRPSOHW 5pVROXWLRQ 1XPpUR VpTXHQWLHO QRPEUH WRWDO G¶LPDJHV GDQV OH FRQWHQX M
$SSX\H] VXU M m < RX , SRXU VpOHFWLRQQHU O¶LPDJH TXH YRXV VRXKDLWH] DIILFKHU VXU pFUDQ FRPSOHW HW DSSX\H] VXU (17(5 5RWDWLRQ G¶XQ ILFKLHU LPDJH /H PHQX ,QGH[ DSSDUDvW n°: 4/32 Ampl: 1024x768 Fichier: SPORTS Date: 29/7/2001 14:22 9RXV SRXYH] IDLUH SLYRWHU XQH LPDJH SDU LQFUpPHQWV GH Écran complet Écran complet Fermer Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 Retour MENU Protect. Rotation Lancmnt ENTER Suppr.
$SSX\H] VXU M m < RX , SRXU VpOHFWLRQQHU O¶LPDJH TXH YRXV VRXKDLWH] IDLUH SLYRWHU HW DSSX\H] VXU (17(5 /H PHQX ,QGH[ DSSDUDvW n°: 4/32 Ampl: 1024x768 Fichier: SPORTS Date: 29/7/2001 14:22 Écran complet Écran complet 3URWHFWLRQ G¶XQH LPDJH IL[H LPSRUWDQWH 9RXV SRXYH] SURWpJHU XQH LPDJH IL[H DILQ G¶pYLWHU WRXW HIIDFHPHQW DFFLGHQW Fermer Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 Retour Protect. Rotation MENU Lancmnt Suppr.
$SSX\H] VXU M m < RX , SRXU VpOHFWLRQQHU O¶LPDJH TXH YRXV VRXKDLWH] SURWpJHU HW DSSX\H] VXU (17(5 /H PHQX ,QGH[ DSSDUDvW n°: 4/32 Ampl: 1024x768 Fichier: SPORTS Date: 29/7/2001 14:22 Écran complet Écran complet Fermer Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 Retour Protect.
$SSX\H] VXU M RX m SRXU VpOHFWLRQQHU ³,QGH[´ HW DSSX\H] VXU (17(5 5pJODJH GH O¶LPDJH GH ODQFHPHQW /HV LPDJHV LQGH[pHV GX FRQWHQX VpOHFWLRQQp V¶DIILFKHQW $SSX\H] VXU M m < RX , SRXU VpOHFWLRQQHU O¶LPDJH TXH YRXV VRXKDLWH] XWLOLVHU FRPPH LPDJH GH ODQFHPHQW HW DSSX\H] VXU (17(5 SIDE SHOT VOLUME + – + – INPUT MS SLIDE APA VIDEO MEMORY DYNAMIC STANDARD USER 1 /H PHQX ,QGH[ DSSDUDvW USER 2 LIVING USER 3 OFF MENU n°: 4/32 Ampl: 1024x768 Fichier: SPORTS Date: 29/7/2001 14:22
$SSX\H] VXU M RX m SRXU VpOHFWLRQQHU ³/DQFPQW´ HW DSSX\H] VXU (17(5 6XSSUHVVLRQ G¶XQ ILFKLHU LPDJH RÉGLAGE Lancement: Original Original Personnalisé Désactivé 9RXV SRXYH] VXSSULPHU OHV LPDJHV LQXWLOHV GH YRWUH ³0HPRU\ 6WLFN´ MENU ENTER $SSX\H] VXU M RX m SRXU VpOHFWLRQQHU OH SDUDPqWUH XWLOLVp SRXU O¶LPDJH GH ODQFHPHQW HW DSSX\H] VXU (17(5 5HPDUTXHV 6L YRXV YRXOH] HIIDFHU O¶pFUDQ GH ODQFHPHQW WDQGLV TX¶LO HVW DIILFKp DSSX\H] VXU M m < , RX VXU (17(5 6L YRXV VRXKDLWH] XW
$SSX\H] VXU M m < RX , SRXU VpOHFWLRQQHU O¶LPDJH TXH YRXV VRXKDLWH] HIIDFHU GX ³0HPRU\ 6WLFN´ HW DSSX\H] VXU (17(5 /H PHQX ,QGH[ DSSDUDvW n°: 4/32 Ampl: 1024x768 Fichier: SPORTS Date: 29/7/2001 14:22 Écran complet Écran complet Fermer Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 5pLQLWLDOLVDWLRQ G¶XQ ³0HPRU\ 6WLFN´ 6L XQ ³0HPRU\ 6WLFN´ QH SHXW SDV rWUH XWLOLVp UpLQLWLDOLVH] OH j O¶DLGH GX SURMHFWHXU 7RXWHV OHV GRQQpHV VWRFNpHV GDQV XQ ³0HPRU\ 6WLFN´ VRQW
$SSX\H] GH QRXYHDX VXU (17(5 MEMORY STICK Format Exécuter Retour $SSX\H] VXU M RX m SRXU VpOHFWLRQQHU ³([pFXWHU´ HW DSSX\H] VXU (17(5 $SSX\H] VXU M SRXU GpPDUUHU OD UpLQLWLDOLVDWLRQ 8WLOLVDWLRQ G¶XQ ³0HPRU\ 6WLFN´ 3RXU UHVWDXUHU OD IRQFWLRQ 06 KRPH DYDQW OD UpLQLWLDOLVDWLRQ GX ³0HPRU\ 6WLFN´ 6pOHFWLRQQH] ³5HWRXU´ HW DSSX\H] VXU (17(5 j O¶pWDSH 5HPDUTXHV /RUVTXH OH ³0HPRU\ 6WLFN´ HVW UpLQLWLDOLVp OH ILFKLHU LPDJH SURWpJp HVW pJDOHPHQW VXSSULPp /RUVTX¶XQ ³0HPRU\ 6WLFN´ GRQW O¶
$XWUHV &HWWH VHFWLRQ LQGLTXH FRPPHQW UpVRXGUH OHV LQFLGHQWV FRPPHQW UHPSODFHU XQH ODPSH RX OH ILOWUH j DLU HWF 'pSDQQDJH 6\PSW{PH &DXVH HW UHPqGH /H SURMHFWHXU QH VH PHW SDV VRXV WHQVLRQ /H SURMHFWHXU D pWp PLV KRUV HW VRXV WHQVLRQ j EUHIV LQWHUYDOOHV j O¶DLGH GH OD WRXFKH [ 1 PDUFKH YHLOOH c $WWHQGH] HQYLURQ PLQXWH DYDQW GH PHWWUH OH SURMHFWHXU VRXV WHQVLRQ 1 SDJH /H FRXYHUFOH GH OD ODPSH HVW PDO IL[p c 5HIHUPH] FRUUHFWHPHQW OH FRXYHUFOH GH OD ODPSH 1 SDJH /H FRXYHUFOH
6\PSW{PH &DXVH HW UHPqGH /¶LPDJH WUHPEORWH /H SDUDPqWUH 3+$6( GX PHQX 5(*/ (175(( Q¶D SDV pWp ELHQ UpJOp c 5pJOH] FRUUHFWHPHQW OH SDUDPqWUH 3+$6( GDQV OH PHQX 5(*/ (175(( 1 SDJH 3DV G¶DIILFKDJH VXU pFUDQ /H SDUDPqWUH (7$7 GX PHQX 5(*/$*( HVW UpJOp VXU 2)) c 5pJOH] O¶(7$7 GDQV OH PHQX 5(*/$*( VXU 21 1 SDJH 3DV GH VRQ 8Q FkEOH HVW GpEUDQFKp RX OHV UDFFRUGHPHQWV VRQW PDO HIIHFWXpV c 9pULILH] VL OHV UDFFRUGHPHQWV RQW pWp HIIHFWXpV FRUUHFWHPHQW 1 SDJHV HW /H UpJODJH
7pPRLQV /H WpPRLQ /$03 &29(5 RX 7(03 )$1 GX SDQQHDX GH FRPPDQGH V¶DOOXPH RX FOLJQRWH HQ FDV GH G\VIRQFWLRQQHPHQW GH YRWUH SURMHFWHXU LAMP/ COVER TEMP/ FAN POWER SAVING ON/ STANDBY 7pPRLQ 7(03 )$1 7pPRLQ /$03 &29(5 7pPRLQ 6LJQLILFDWLRQ HW UHPqGH /H WpPRLQ /$03 &29(5 FOLJQRWH /H FRXYHUFOH GH OD ODPSH RX GX ILOWUH j DLU HVW PDO IL[p c 5HIHUPH] FRUUHFWHPHQW OH FRXYHUFOH 1 SDJHV HW /H WpPRLQ /$03 &29(5 V¶DOOXPH /D ODPSH D DWWHLQW OD ILQ GH VD GXUpH GH YLH c 5HPSODFH] OD ODPSH 1 SD
0HVVDJHV GH SUpFDXWLRQ &RQVXOWH] OD OLVWH FL GHVVRXV SRXU FRQQDvWUH OD VLJQLILFDWLRQ GHV PHVVDJHV DIILFKpV j O¶pFUDQ 0HVVDJH 6LJQLILFDWLRQ HW UHPqGH 3$6 '¶(175(( $EVHQFH GH VLJQDO G¶HQWUpH c &RQWU{OH] OHV UDFFRUGHPHQWV 1 SDJH 1RQ DSSOLFDEOH 9RXV DYH] DSSX\p VXU OD PDXYDLVH WRXFKH c $SSX\H] VXU OD WRXFKH DSSURSULpH (UUHXU ILFKLHU /RUV GH O¶XWLOLVDWLRQ G¶XQ ³0HPRU\ 6WLFN´ GDQV OH VRXV PHQX GH VpOHFWLRQ G¶XQ ILFKLHU OH QRP GH ILFKLHU DFWXHOOHPHQW VpOHFWLRQQp HVW FRPSRVp GH SOXV GH F
5HPSODFHPHQW GH OD ODPSH /D ODPSH XWLOLVpH FRPPH VRXUFH GH OXPLqUH SRVVqGH XQH GXUpH GH YLH OLPLWpH /RUVTXH OD ODPSH D SHUGX HQ OXPLQRVLWp TXH O¶pTXLOLEUH GHV FRXOHXUV GH O¶LPDJH SUHQG XQ DVSHFW pWUDQJH RX TXH OH PHVVDJH ³5HPSODFHU OD ODPSH´ V¶DIILFKH j O¶pFUDQ OD ODPSH HVW XVpH 5HPSODFH] OD ODPSH SDU XQH QHXYH QRQ IRXUQLH 8WLOLVH] OD ODPSH SRXU SURMHFWHXU /03 + FRPPH ODPSH GH UHFKDQJH 3RXU UHPSODFHU OD ODPSH DSUqV DYRLU XWLOLVp OH SURMHFWHXU 0HWWH] OH SURMHFWHXU KRUV WHQVLRQ HW GpEUDQF
5HPDUTXHV 1¶LQWURGXLVH] SDV OHV GRLJWV j O¶LQWpULHXU GX ORJHPHQW GH OD ODPSH HW YHLOOH] j FH TX¶DXFXQ OLTXLGH RX REMHW Q¶\ SpQqWUH GH PDQLqUH j SUpYHQLU WRXW ULVTXH G¶pOHFWURFXWLRQ RX G¶LQFHQGLH 3RXU OH UHPSODFHPHQW XWLOLVH] XQLTXHPHQW XQH ODPSH SRXU SURMHFWHXU /03 + 6L YRXV XWLOLVH] XQH DXWUH ODPSH OH SURMHFWHXU ULVTXH GH FRQQDvWUH XQH GpIDLOODQFH 0HWWH] OH SURMHFWHXU KRUV WHQVLRQ HW GpEUDQFKH] OH FRUGRQ G¶DOLPHQWDWLRQ DYDQW GH SURFpGHU DX UHPSODFHPHQW GH OD ODPSH 0LVH DX UHEXW G¶XQH O
AUDIO Spécifications Système Système de projection Système de projection à 3 panneaux LCD, 1 objectif Panneau LCD Panneau LCD TFT 0,7 pouce, 1.440.000 pixels (480.
Mode d’emploi (1) La conception et les spécifications sont sujettes à modification sans préavis.
6LJQDX[ G¶HQWUpH HW SDUDPqWUHV UpJODEOHV GH UpJODJH &HUWDLQV SDUDPqWUHV GHV PHQXV QH SHXYHQW SDV rWUH UpJOpV HQ IRQFWLRQ GX VLJQDO G¶HQWUpH 0HQX &75/ ,0$*( 3DUDPqWUH 6LJQDO G¶HQWUpH 9LGpR RX 6 YLGpR < & &RPSRVDQW 9LGpR *%5 2UGLQDWHXU 06 &2175$67( z z z z /80,(5( z z z z &28/(85 z VDXI SRXU % 1 z z ± z 176& XQLTXHPHQW VDXI SRXU % 1 z z ± 1(77(7( z z z ± 237,0,6(85 59% ± ± ± z ,0$*( ' z z N 59% XQLTXHPHQW z N 59% XQLTXHPHQW ± 02'( *$00$ ± ± z
6LJQDX[ SUpVpOHFWLRQQpV 1 GH 6LJQDO SUpVpOHFWLRQQp PpPRLUH I+ N+] I9 +] 9LGpR +] 9LGpR +] 59% N j FRPSRVDQWHV +] 59% N j FRPSRVDQWHV +] L L '79 × 9*$ PRGH 9*$ 9(6$ +] × 3& 1RUPDO 9*$ PRGH 9*$ 9(6$ +] × 9*$ PRGH 0DFLQWRVK 9*$ 9(6$ +] 9*$ 9(6$ +] 9*$ 9(6$ +] ×
$YHUWLVVHPHQW UHODWLI DX UDFFRUGHPHQW VHFWHXU 8WLOLVH] XQ FRUGRQ G¶DOLPHQWDWLRQ DGpTXDW SRXU YRWUH DOLPHQWDWLRQ VHFWHXU ORFDOH 7\SH GH ILFKH ([WUpPLWp IHPHOOH 7\SH GH FRUGRQ 7HQVLRQ HW FRXUDQW QRPLQDX[ $SSUREDWLRQ GH VpFXULWp $XWUHV )5 6SpFLILFDWLRQV (WDWV 8QLV &DQDGD <3 <& / 637 $ 9 (XURSH FRQWLQHQWDOH <3 <& / + 99+ ) $ 9 5R\DXPH 8QL $XVWUDOLH -DSRQ 63 <& / + 99+ ) $ 9 % & + 99+ ) $ 9 <3 <& / 9&7).
(PSODFHPHQW GHV FRPPDQGHV $YDQW 9RXV SRXYH] XWLOLVH] OHV WRXFKHV GX SDQQHDX GH FRPPDQGH SRUWDQW OH PrPH QRP TXH OHV WRXFKHV GH OD WpOpFRPPDQGH DILQ GH IDLUH IRQFWLRQQHU OH SURMHFWHXU ,QGLFDWHXU 32:(5 6$9,1* 1 SDJH 7pPRLQ 7(03 )$1 1 SDJH 7pPRLQ /$03 &29(5 1 SDJH ,QGLFDWHXU 21 67$1'%< 1 SDJH LAMP/ COVER 7RXFKHV M m < , TEMP/ FAN POWER SAVING &RPPXWDWHXU [ 1 PDUFKH YHLOOH ON/ STANDBY SIDE SHOT + MENU VIDEO MEMORY ENTER RESET INPUT 7RXFKHV 6,'( 6+27 ± 7RXFKH 0(18 7RXF
$UULqUH +DXW SDUOHXU &DSWHXU GH WpOpFRPPDQGH DUULqUH 6XSSRUW UpJODEOH 1 SDJH &RXYHUFOH GH ODPSH EDV 1 SDJH &RQQHFWHXU 6 9,'(2 ,1387 PLQLFRQQHFWHXU ',1 EURFKHV SULVH 9,'(2 ,1387 W\SH SKRQR 1 SDJH 3ULVHV $8',2 / 5 W\SH SKRQR 1 SDJH $XWUHV )5 (PSODFHPHQW GHV FRPPDQGHV 3ULVH a $& ,1 (MONO) S VIDEO VIDEO L AUDIO R INPUT PJ MULTI ~ AC IN &RQQHFWHXU 3- 08/7, ,1387 PXOWL EURFKHV 1 SDJH
7pOpFRPPDQGH (PHWWHXU LQIUDURXJH 7RXFKH /,*+7 (FODLUH OHV WRXFKHV GH OD WpOpFRPPDQGH 7RXFKHV 6,'( 6+27 ± 1 SDJH &RPPXWDWHXU [ 1 PDUFKH YHLOOH 1 SDJH SIDE SHOT VOLUME + – + – INPUT 7RXFKH ,1387 1 SDJH MS SLIDE 7RXFKH 06 6/,'( 1 SDJH APA 7RXFKHV 92/80( ± 1 SDJH VIDEO MEMORY DYNAMIC STANDARD USER 1 USER 2 LIVING USER 3 OFF 7RXFKH 0(18 1 SDJH 7RXFKH $3$ 1 SDJH 7RXFKHV 9,'(2 0(025< 1 SDJH '<1$0,& 67$1'$5' /,9,1* 86(5 2)) MENU 7RXFKHV M m <
,QGH[ / 3 /$1*$*( /80,(5( 3+$6( 326,7,21 0(18 3URMHFWLRQ 0 $ $FFHVVRLUHV HQ RSWLRQ $FFHVVRLUHV IRXUQLV $03/ + $55,(5( 3/$1 0(18 & &DSWHXU GH WpOpFRPPDQGH DUU
ADVERTENCIA Para evitar el riesgo de incendio o electrocución, no exponga la unidad a la lluvia ni a la humedad. Para evitar recibir descargas eléctricas, no abra el aparato. Contrate exclusivamente los servicios de personal cualificado La toma de corriente debe encontrarse cerca del equipo y ser de fácil acceso.
Índice Ajuste de la calidad de la imagen de una señal procedente de un ordenador .....................23 Uso de un “Memory Stick” Acerca del “Memory Stick” ......................24 Precauciones ............................................ 4 Conexión y preparación Desembalaje ............................................. 5 Paso 1: Instalación del proyector .............. 5 Antes de instalar el proyector .........................
Embalaje Precauciones Seguridad • Compruebe que la tensión de funcionamiento de la unidad sea la misma que la del suministro eléctrico local. • Si se introduce algún objeto sólido o líquido en la unidad, desenchúfela y haga que sea revisada por personal especializado antes de volver a utilizarla. • Desenchufe la unidad de la toma mural cuando no vaya a utilizarla durante varios días. • Para desconectar el cable, tire del enchufe. Nunca tire del propio cable.
En esta sección se describe cómo instalar el proyector y la pantalla, cómo conectar el equipo desde el cual desea proyectar la imagen, etc.. Paso 1: Instalación del proyector Conexión y preparación Conexión y preparación Desembalaje Compruebe que la caja contenga los siguientes elementos: Se puede obtener una buena calidad de imagen incluso si la proyecta desde el lateral de la pantalla (“SIDE SHOT”) (1 página 7). Este proyector se puede disfrutar en el hogar para diversas actividades recreativas.
Conexión y preparación Ver deportes, etc., con los amigos ; Calor y humedad excesivos Ambientes con mucho polvo en suspensión o mucho humo Ver las imágenes grabadas con una cámara digital y guardadas en el “Memory Stick”, en una pantalla grande No emplee el proyector en las siguientes condiciones.
La distancia entre el proyector y la pantalla varía en función del tamaño de ésta. 1 Disposición del proyector y la pantalla.
Conexión y preparación Paso 2: Conexión del proyector Conexión con los cables de interfaz de señales opcionales Conexión a un reproductor de DVD con conectores de vídeo o sintonizador digital de emisiones vía satélite Parte trasera del proyector Cuando realice las conexiones, asegúrese de realizar lo siguiente: • Apague todos los equipos antes de realizar cualquier conexión. • Utilice los cables apropiados para cada conexión.
Parte trasera del proyector Conexión con la unidad de interfaz de señales opcional La utilización de la unidad de interfaz de señales opcional le permite conectar varios equipos de vídeo, y seleccionar la señal de salida hacia el proyector o la televisión desde el equipo conectado, con solo pulsar el interruptor de selección de la unidad de interfaz.
Conexión y preparación Paso 3: Ajuste del tamaño y la posición de la imagen 1 Enchufe el cable de alimentación de CA a un enchufe de la pared. El indicador ON/STANDBY se iluminará en rojo y el proyector entrará en el modo de espera. ON/ STANDBY La luz se ilumina en rojo. Detector trasero del mando a distancia 6 5,8 Detector frontal del mando a distancia Bloqueo del a ajustador 2 Pulse el interruptor [/1 (encendido/espera) para encender el proyector. El indicador ON/STANDBY se iluminará en verde.
enfoque con la palanca de enfoque. Conexión y preparación 5 Ajuste de forma aproximada el El proyector se puede mover en sentido vertical y horizontal dentro de los límites siguientes: Hasta 20° para cada uno de los ángulos horizontales Palanca de enfoque 6 Ajuste el tamaño y la posición de la imagen para que se acomode a la pantalla, utilizando la palanca del zoom y el ajustador.
Conexión y preparación 7 Ajuste para corregir la distorsión trapezoidal. Proyección desde un lado Corrige la distorsión horizontal. Pulse los botones + o – de SIDE SHOT de modo que el borde superior de la imagen quede paralelo al borde inferior. Si el lado izquierdo es más largo que el lado derecho, pulse el botón – de SIDE SHOT. Paso 4: Selección del idioma del menú Es posible seleccionar el idioma que se desee entre los nueve existentes para el menú y demás indicaciones en pantalla.
5 Pulse M o m para seleccionar (encendido/espera) para encender el proyector. El indicador ON/STANDBY se iluminará en verde. LANGUAGE (IDIOMA), y, a continuación, pulse , o ENTER. Conexión y preparación 2 Pulse el interruptor [/1 3 Pulse MENU. Aparecerá la pantalla de menú. El menú actualmente seleccionado se muestra como un botón amarillo. ENTER VIDEO 1 PICTURE CTRL CONTRAST: BRIGHT: COLOR: HUE: SHARP: D.
1 Enchufe el cable de Proyección En esta sección se describe cómo utilizar el proyector para ver la imagen procedente del equipo conectado al mismo. También se describe cómo ajustar la calidad de la imagen a su gusto. alimentación de CA a un enchufe de la pared. El indicador ON/STANDBY se iluminará en rojo y el proyector entrará en el modo de espera. ON/ STANDBY Proyección Proyección de la imagen en la pantalla La luz se ilumina en rojo.
Pulse INPUT para que aparezca El sonido procede del equipo conectado a Equipo de vídeo conectado a VIDEO INPUT VIDEO 1 AUDIO INPUT Equipo de vídeo conectado a S VIDEO INPUT S VIDEO 1 AUDIO INPUT Para ver la imagen procedente de 5 Mueva la palanca del zoom para ajustar el tamaño de la imagen. Equipo de vídeo conectado a PJ MULTI INPUT por medio del cable de interfaz de señales opcional o la unidad de interfaz de señales.
Desconexión de la alimentación 1 Pulse el interruptor [/1 (encendido/ espera). En la pantalla aparece el mensaje “DESACTIVAR?”. Proyección 2 Vuelva a pulsar el interruptor [/1. El indicador ON/STANDBY parpadeará en verde y el ventilador seguirá funcionando para reducir el calentamiento interno. Además, mientras el indicador ON/STANDBY esté parpadeando rápidamente no podrá encender el indicador ON/ STANDBY con el interruptor [/1.
Pulse uno de los botones VIDEO MEMORY, es decir, DYNAMIC, STANDARD, LIVING y USER 1, 2 y 3 DYNAMIC (dinámico) Selecciónelo para dar más contraste y más nitidez a la imagen. Proyección STANDARD Recomendado para unas condiciones de visualización normales en el hogar. Selecciónelo también para reducir las irregularidades de la imagen cuando se esté viendo con el modo DYNAMIC. LIVING (sala estar) Selecciónelo para obtener una imagen más suave, como la de las películas.
Utilización de los menús En esta sección se describe cómo hacer diversos cambios en el nivel de ajuste y ajustes utilizando los menús. 1 Pulse MENU. Aparecerá la pantalla de menú. El menú actualmente seleccionado se muestra como un botón amarillo. VIDEO 1 CTRL IMAGEN Funcionamiento por medio de los menús CONTRASTE: BRILLO: COLOR: TONALIDAD: NITIDEZ: IMAG DI: TEMP COLOR: SIST COLOR: VOLUMEN: MENU 80 50 50 50 50 NO ALTO AUTO 30 2 Pulse M o m para seleccionar un menú, y, a continuación, pulse , o ENTER.
4 Realice el ajuste o cambie el nivel de ajuste en uno de los elementos. Configuraciones de menú Al cambiar el nivel de ajuste Para que el número aumente, pulse M o ,. Para que el número disminuya, pulse m o <. Pulse ENTER para recuperar la pantalla original. Cuando cambie el ajuste Pulse M o m para cambiar el ajuste. Pulse < o ENTER para recuperar la pantalla original. VIDEO 1 AJUSTE SI COMPONENTE ESPANOL SI ENTER o Menú CTRL IMAGEN El menú CTRL (control) IMAGEN se utiliza para ajustar la imagen.
Elementos de menú Los elementos que se pueden ajustar están limitados según el tipo de señal de entrada. Los elementos que no pueden ajustarse no aparecen en el menú. (1 página 47) Utilización de los menús ES 20 Menú Elemento Descripción CTRL IMAGEN CONTRASTE Cuanto mayor sea el ajuste, mayor será el contraste. Cuanto menor sea el ajuste, menor será el contraste. BRILLO (brillantez) Cuanto mayor sea el ajuste, mayor será el brillo de la imagen.
Menú Elemento Descripción AJUS ENTRAD FASE PUNTO Cuando la señal de entrada procede de un ordenador, una vez ajustada la imagen, la ajusta con mayor precisión pulsando el botón APA. TAMANO H Cuando la señal de entrada procede de un ordenador, ajusta el tamaño horizontal de la imagen. Cuanto mayor sea el ajuste, más ancha será la imagen. Cuanto menor sea el ajuste, más estrecha será la imagen.
Menú AJUSTE Utilización de los menús ES 22 Elemento Descripción ESTADO Ajústelo en NO para desactivar las indicaciones en pantalla, excepto los menús, el mensaje que aparece al desconectar la alimentación, y los mensajes de aviso. Para volver a mostrar todas las indicaciones en pantalla, ajústelo en SI. ENTRAD A Selecciona la señal de entrada procedente del conector PJ MULTI: ORDENADOR: Introduce la señal de un ordenador.
Acerca del nº de memoria predefinida Este proyector dispone de 32 tipos de datos predefinidos para señales de entrada (memoria predefinida). Al introducirse una señal predefinida, el proyector detecta automáticamente el tipo de señal y recupera los datos correspondientes a la misma de la memoria predefinida con el fin de ajustarla y obtener una imagen óptima. El número de memoria y el tipo de señal de esa señal aparecen en el menú AJUS ENTRAD.
Uso de un “Memory Stick” En esta sección se describe cómo visualizar archivos de imagen grabados con una cámara digital y guardados en un “Memory Stick”. Puede hacer una presentación de diapositivas utilizando los archivos, mostrar una pantalla de índice del archivo, etc. Acerca del “Memory Stick” MagicGate MagicGate es una tecnología de protección de copyright que utiliza tecnología de cifrado.
Acerca del formateo de “Memory Stick” Cuando los “Memory Stick” salen de fábrica, se encuentran formateados en un formato estándar especial. Cuando formatee “Memory Stick”, se recomienda que lo haga en esta unidad. Precaución cuando formatee “Memory Stick” en un ordenador personal Preste atención a los siguientes puntos cuando formatee “Memory Stick” en el ordenador personal, por ejemplo, que utilice. No se garantiza que los “Memory Stick” formateados en un ordenador personal funcionen en esta unidad.
Selección de contenido que incluye una imagen fija deseada 2 Pulse M o m para seleccionar ACCIÓN , y pulse ENTER. ACCIÓN Visor JPEG Diapos. Índice Sel. cont. SIDE SHOT VOLUME + – + – 1 INPUT MS SLIDE APA VIDEO MEMORY DYNAMIC STANDARD USER 1 USER 2 LIVING USER 3 3 Pulse M o m para seleccionar OFF MENU ENTER 2-4 2-5 RESET 1 Pulse el botón INPUT para Uso de un “Memory Stick” seleccionar MS “Sel. Cont.”, y pulse ENTER. Aparece el submenú para seleccionar una carpeta.
4 Pulse M o m para seleccionar la carpeta que quiere utilizar para la presentación de diapositivas, y pulse ENTER. Si desea seleccionar una carpeta que no se encuentra en el menú, seleccione v o V, y pulse ENTER a continuación. 5 Pulse ENTER. Aparecen el nombre de la carpeta seleccionada y las dos primeras miniaturas.
2 Pulse M o m para seleccionar “Diapos.” y pulse ENTER. Aparece el submenú para ajustar los siguientes elementos. ACCIÓN Visor JPEG Diapos. Índice Sel. cont. Ejecutar Volver Efecto No Av. diap. Auto Interval 1 seg DCIM 5 Después de configurar todos los elementos, pulse M o m para seleccionar “Ejecutar”, y pulse ENTER. Cuando se configura “Av. diap.” en “Auto”, la presentación de diapositivas comienza automáticamente.
Visualización imágenes de índice en pantalla completa Se pueden ver a la vez 9 imágenes de índice (imágenes de miniaturas) contenidas en la carpeta seleccionada. Cuando la carpeta contiene más de 9 archivos de imagen Puede visualizar las imágenes que no aparecen en pantalla pulsando v (9 imágenes anteriores) o V (9 imágenes siguientes) y ENTER.
Visualización del Menú de índice Pulse M, m, < o , para seleccionar un archivo de imagen, y pulse ENTER. Aparece el menú de índice del archivo seleccionado. Con este menú puede efectuar varios ajustes para cada archivo. (1 páginas 30 a 35) Visualización de una imagen a pantalla completa Fecha de grabación de la imagen Puede proyectar una de las imágenes de índice a pantalla completa.
3 Pulse M, m, < o , para seleccionar la imagen que quiere ver a pantalla completa, y pulse ENTER. Giro de un archivo de imagen Aparecerá el menú de índice. Num.: 4/32 Tamaño: 1024x768 Archivo: SPORTS Fecha: 29/7/2001 14:22 Un archivo de imagen se puede girar en pasos de 90°. Pant. Completa Cerrar Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 Volver Protec. MENU Rotar Iniciar Borrar ENTER RESET 2-5 4 Pulse M o m para seleccionar “Pant. completa”, y pulse ENTER.
3 Pulse M, m, < o , para seleccionar la imagen que desea rotar, y pulse ENTER. Aparecerá el menú de índice. Num.: 4/32 Tamaño: 1024x768 Archivo: SPORTS Fecha: 29/7/2001 14:22 Pant. Completa Cerrar Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 Volver Protección de un archivo importante Los archivos se pueden proteger para evitar que se borren accidentalmente. Protec. Rotar Iniciar MENU Borrar ENTER 4 Pulse M o m para seleccionar RESET 2-5 “Rotar”, y pulse ENTER.
3 Pulse M, m, < o , para Proyección de un archivo seleccionado con la alimentación activada - Inicio seleccionar la imagen que quiere proteger, y pulse ENTER. Aparecerá el menú de índice. Num.: 4/32 Tamaño: 1024x768 Archivo: SPORTS Fecha: 29/7/2001 14:22 Al activar la alimentación del proyector, la imagen fija específica guardada en el proyectorse proyecta automáticamente durante alrededor de un minuto, incluso si no entra ningún tipo de señal.
3 Pulse M, m, < o , para Ajuste de la imagen de inicio seleccionar la imagen que quiere utilizar cómo archivo de inicio, y pulse ENTER. Aparecerá el menú de índice. Num.: 4/32 Tamaño: 1024x768 Archivo: SPORTS Fecha: 29/7/2001 14:22 VOLUME + – + – INPUT MS SLIDE 1 APA VIDEO MEMORY Pant. Completa DYNAMIC STANDARD Cerrar Reciipe flour - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 butter - - -1 SIDE SHOT LIVING Volver USER 1 USER 2 USER 3 Protec.
4 Pulse M o m para seleccionar el elemento que se va a utilizar cómo archivo de inicio, y pulse ENTER. Original: selecciónelo para utilizar el archivo originalmente guardado en el proyector. No puede cambiar el archivo original. Personal: selecciónelo para utilizar el archivo registrado en la pantalla de índice y guardado en el “Memory Stick”. (1 página 33) No: selecciónelo cuando no ajuste el inicio. Notas • Cuando desee borrar la pantalla de inicio mientras la visualiza, pulse M/m/
5 Pulse M o m para seleccionar el elemento que desee, y a continuación pulse M para borrar el archivo o archivos. Sel. Img.: elimina el archivo de imagen seleccionado Todo Im.: elimina todos los archivos de imagen del contenido seleccionado Cerrar: cuando no se elimina el archivo Notas • No puede eliminar el archivo de imagen que esté protegido. (1 página 32) Para eliminarlo, cancele la protección de dicho archivo.
3 Vuelva a pulsar ENTER. MEMORY STICK Formato Ejecutar Volver 4 Pulse M o m para seleccionar “Ejecutar”, y pulse ENTER. 5 Pulse la tecla M para comenzar la inicialización. Retorno a la página inicial MS antes de inicializar el “Memory Stick” Uso de un “Memory Stick” Seleccione “Volver” y pulse ENTER en el paso 4. Notas • Al inicializar el “Memory Stick”, los archivos de imagen protegidos también se borran.
Otros En esta sección se describe cómo solucionar los problemas, cómo cambiar una lámpara y el filtro de aire, etc.. Solución de problemas Otros ES 38 Problema Causa y solución La alimentación no se activa. • La alimentación se ha desactivado y activado de nuevo con la tecla [/1 (on/ standby) en un corto intervalo. c Espere unos 1 minuto antes de activar la alimentación (1 página 16). • La cubierta de la lámpara no está fijada. c Cierre firmemente la cubierta de la lámpara (1 página 42).
Problema Causa y solución La imagen parpadea. • No se ha ajustado correctamente FASE PUNTO en el menú AJUS ENTRAD . c Ajuste FASE PUNTO en el menú AJUS ENTRAD correctamente (1 página 21). La indicación en pantalla no aparece. • El ESTADO en el menú AJUSTE se ha ajustado en NO. c Ajuste ESTADO en el menú AJUSTE en SI (1 página 22). No se oye el sonido. • El cable está desconectado o las conexiones son incorrectas. c Compruebe que se han realizado las conexiones adecuadas (1 páginas 8 y 9).
Indicadores El indicador LAMP/COVER o el indicador TEMP/FAN del panel de control se enciende o parpadea si el proyector tiene algún problema. LAMP/ COVER TEMP/ FAN POWER SAVING ON/ STANDBY Indicador TEMP/FAN Indicador LAMP/COVER Indicador Significado y solución El indicador LAMP/ COVER parpadea. • La cubierta de la lámpara o la del filtro de aire no está fijada. c Fije la cubierta firmemente (1 páginas 42 y 43). El indicador LAMP/ COVER se ilumina. • La lámpara ha llegado al final de su vida útil.
Mensajes de precaución Utilice la siguiente lista para comprobar el significado de los mensajes que aparecen en pantalla. Mensaje Significado y solución SIN ENTRADA • Ninguna señal de entrada c Compruebe las conexiones (1 página 8). ¡No aplicable! • Ha pulsado una tecla incorrecta. c Pulse la tecla apropiada. Error archivo • En el submenú para seleccionar un archivo, cuando se utiliza un “Memory Stick”, el nombre de carpeta seleccionada en ese momento tiene más de 66 caracteres (“/” incluido).
Sustitución de la lámpara La lámpara que se utiliza para la iluminación tiene una vida útil. Cuando la luz de la lámpara pierde intensidad, el balance de color de la imagen se vuelve extraño, o aparece el mensaje “Por favor cambie la lámpara”, la lámpara está agotada. Sustituya la lámpara por una nueva (no suministrada). La lámpara de recambio debe ser una lámpara de proyector LMP-H120. Sustitución de la lámpara después de utilizar el proyector Apague el proyector y desenchufe el cable de alimentación.
Notas • Con el fin de evitar descargas eléctricas o incendios, no introduzca las manos en el compartimento de sustitución de la lámpara, ni permita que se introduzcan líquidos ni objetos. • Asegúrese de utilizar la lámpara de proyector LMP-H120 para la sustitución. Si utiliza otras lámparas que no sean la LMP-H120, el proyector puede causar fallos de funcionamiento. • Compruebe que apaga el proyector y desenchufa el cable de alimentación antes de sustituir la lámpara.
3 Empuje el pomo de la cubierta del filtro de aire para desmontarla. Especificaciones Pomo Sistema 4 Desmonte el soporte del filtro. 5 Desmonte el filtro de aire de su soporte sujetándolo por la lengüeta. Filtro de aire Soporte del filtro Lengüeta 6 Introduzca el filtro de aire nuevo dentro del soporte con la superficie blanca mirando hacia arriba, y vuelva a montarlo en el proyector. 7 Monte la cubierta del filtro. 8 Monte el ajustador.
Entrada/Salida Entrada de vídeo VIDEO: tipo fonográfico Vídeo compuesto: 1 Vp-p ± 2 dB sincronización negativa (terminación de 75 ohmios) S VIDEO: tipo Y/C mini DIN de 4 terminales (macho) Y (luminancia): 1 Vp-p ±2 dB sincronización negativa (terminación de 75 ohmios) C (crominancia): sincronización de color 0,286 Vp-p ±2 dB (NTSC) (terminación de 75 ohmios), sincronización de color 0,3 Vp-p ±2 dB (PAL) (terminación de 75 ohmios) AUDIO Tipo fonográfico × 2, estéreo 500 mVrms, impedancia superior a 47 kilooh
Distancia de proyección para señal de formato 720p, señal de ordenador, etc.
Señales de entrada y elementos ajustables/de ajuste Algunos de los elementos del menú no pueden ajustarse dependiendo de la señal de entrada.
Señales predefinidas Nº de memoria 1 2 3 Señal predefinida fH (kHz) fV (Hz) Vídeo 60 Hz Vídeo 50 Hz RVA de 15k/Componente 60 Hz 15,734 15,625 15,734 59,940 50,000 59,940 4 RVA de 15k/Componente 50 Hz 15,625 50,000 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 43 44 45 47 48 50 1080/60i, 1035/60i (DTV) 640 × 350 Modo VGA 1 VGA VESA 85Hz 640 × 400 PC-9801 Normal Modo VGA 2 VGA VESA 85Hz 640 × 480 Modo VGA 3 Macintosh 13" VGA VESA 72Hz VGA VESA 75Hz VGA VESA 85Hz 800 × 600 SVGA VESA
Ubicación de los controles Frontal Para utilizar el proyector puede utilizar los botones del panel de control que tengan los mismos nombres que los del mando a distancia.
Parte trasera Altavoz Detector posterior de mando a distancia Ajustador (1 1 página 11) Cubierta de la lámpara (inferior) (1 1 página 42) Conector S VIDEO INPUT (mini DIN de 4 terminales)/ toma VIDEO INPUT (tipo fonográfico) (1 1 página 8) Tomas AUDIO L/R (tipo fonográfico) (1 1 página 8) Otros ES 50 Ubicación de los controles Clavija ~ AC IN (MONO) S VIDEO VIDEO L AUDIO R INPUT PJ MULTI ~ AC IN Conector PJ MULTI INPUT (múltiple de 32 terminales) (1 1 página 8)
Mando a distancia Transmisor de infrarrojos Botón LIGHT Ilumina los botones del mando a distancia.
Index Posterior ...................................... DI TRA DIG MEM ......................... DIR TRAPEZ ................................... DIST TRAP DIG ............................. 50 22 22 22 E ENTRAD A ...................................... 22 Especificaciones ............................... 44 ESTADO ........................................... 22 A F Accesorios opcionales ..................... 45 Accesorios proporcionados ............... 5 AHORRO DE ENERGÍA ............... 22 Ajustador ......
Sony Corporation Printed in Japan