4-725-444-01 (1) Video Projector Operating Instructions Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain them for future reference.
Table of Contents Location of Controls Using Network Features Front/Right Side ................................ 3 Rear/Left Side/Bottom ...................... 4 Remote Control ................................. 5 Displaying the Control Window of the Unit with a Web Browser ............. 38 Operating the Control Window ........ 39 Switching the Page .....................39 Setting the Access Limitation ....39 Confirming the Information Regarding the Unit ..................
Location of Controls Front/Right Side Warning indicators Warning indicators Others a ON/STANDBY indicator (page 44) i Lamp cover (page 47) j Ventilation holes (exhaust) b WARNING indicator (page 44) k Ventilation holes (intake) (page 49) Connectors l Remote control detector (page 7) c LAN connector (page 38) d USB connector (page 46) e HDMI 1/HDMI 2 connector (page 11) f REMOTE connector Connects to a computer, etc. for remote control. g IR IN connector Inputs signals to control the unit.
Rear/Left Side/Bottom The buttons on the control panel have the same names as those on the remote control.
a LIGHT button Remote Control Illuminates the buttons on the remote control.
Connections and Preparations Note Installing the Unit When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the unit or the zooming magnifications. This is not a malfunction of the unit. The installation distance between the unit and a screen varies depending on the size of the screen or whether or not you use the lens shift features. Install this unit so that it fits the size of your screen.
Note Adjusting the Picture Position Depending on the installation location of the unit, you may not be able to control it with the remote control. In this case, point the remote control at the remote control detector of the unit or the screen. Project an image on the screen and then adjust the picture position. 1 After connecting the AC power cord to the unit, plug the AC power cord into a wall outlet. The ON/STANDBY indicator lights in red and the unit goes into standby mode.
3 4 Adjust the focus. Press the PATTERN button repeatedly to display the Lens Focus adjustment window (test pattern). Then adjust the focus of the picture by pressing the M/m/
To adjust the horizontal position To adjust the vertical position Press
Range of movement of the projected picture Lens adjustment window (test pattern) 1.78:1 (16:9) 0.85V 1.33:1 (4:3) 0.31H 0.31H Projected Picture 2.35:1 0.8V H: Width of the projected picture V: Height of the projected picture 1.85:1 The dashed lines show the screen sizes of each aspect ratio. To adjust the tilt of the installation surface If the unit is installed on an uneven surface, use the front feet (adjustable) to keep the unit level. Front feet (adjustable) Turn to adjust.
Connecting to Video Equipment or a Computer You can enjoy high picture quality by connecting a DVD player/recorder, Blu-ray Disc player/ recorder, or PlayStation® equipped with HDMI output to the HDMI input of the unit. When making connections, be sure to do the following: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality.
Notes • Use a High Speed HDMI cable or a Premium High Speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed properly. • When connecting an HDMI cable to the unit, make sure the V mark on the upper part of the HDMI input of the unit and the v mark on the connector of the cable is set at the same position. • If the picture from equipment connected to the unit with an HDMI cable is not correct, check the settings of the connected equipment.
Projecting The fan stops and the ON/STANDBY indicator changes from flashing green to remaining red. Projecting the Picture 1 2 3 The power is turned off completely, and you can disconnect the AC power cord. Turn on both the unit and the equipment connected to the unit. Note Never disconnect the AC power cord while the indicator is flashing. Press INPUT to display the input palette on the screen.
Adjusting/Setting the 3D functions Watching 3D Video Images You can adjust/set the 3D functions by pressing the 3D button on the remote control or with the “3D Settings” of the Function menu. For details, see “3D Settings” (page 31). You can enjoy powerful 3D video images, such as from 3D games and 3D Blu-ray Discs, using the optional Active 3D Glasses (TDG-BT500A). 1 Using the 3D Glasses 1 Turn on the HDMI equipment for 3D compatibility connected to the unit, then play the 3D content.
Top or side view Projector 10 m 10 m 10 m 10 m 15
Selecting the Aspect Ratio According to the Video Signal You can select an aspect ratio best suited for the video signal received. Press ASPECT. ASPECT button Each time you press the button, you can select the “Aspect” setting.You can also select it using the menu (page 28). Original image Recommended setting and resultant images 1.85:1 Zoom 1.85:1 Squeezed 1.85:1 2.35:1 Zoom 2.35:1 Squeezed 2.
Original image Recommended setting and resultant images Normal 1.78:1 (16:9) 1.33:1 (4:3) 1.33:1 (4:3) with side panels V Stretch 2.
Original image Recommended setting and resultant images Stretch Squeezed Notes • Selectable aspect modes vary depending on the input signal (page 57). • The aspect cannot be selected for an input signal from a computer, or an input signal with a resolution of 4096 × 2160 (page 52). Notes on switching the “Aspect” setting • Select the aspect mode taking into account that changing the aspect ratio of the original picture will provide a different look from that of the original image.
Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of video source or room conditions. You can save and use different preset modes for 2D/3D respectively. CALIBRATED PRESET buttons Press one of the CALIBRATED PRESET buttons. Setting items Description CINEMA FILM 1 Picture quality suited to reproducing the highly dynamic and clear images typical of master positive film.
Using the Menus Note The menu displays used for the explanation may be different from the actual menu display. 3 Operation through the Menus The setting items are displayed in a popup menu, in a setting menu, in an adjustment menu or in the next menu window. The unit is equipped with an on-screen menu for making various adjustments and settings. If you select an item name followed by an arrow (B), the next menu window with setting items appears.
Next menu window To reset the items that have been adjusted Setting items Select an item in the menu screen, and display the pop-up menu, the setting menu, or the adjustment menu. Press RESET on the remote control to reset only the selected settings to its factory preset value. Note The RESET button on the remote control is available only when the adjustment menu or the setting menu is selected. 4 Make the setting or adjustment of an item.
Picture Menu The Picture menu is used for adjusting the picture. Note These items may not be adjustable or configurable, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (page 54). Item names in brackets represent those printed on the remote control. Setting items Description Calib. Preset [CALIBRATED PRESET] You can select the picture viewing mode that best suits the type of video source or the environment.
Setting items Description Reality Creation [REALITY CREATION] Adjusts the detail and noise processing of images. (Super-resolution function) On: Adjusts the settings of “Reality Creation.” Database: Select “Normal” or “Mastered in 4K.” “Mastered in 4K” provides image quality suitable for Blu-ray Disc™ “Mastered in 4K” releasing from Sony Pictures Home Entertainment. Resolution: When you increase the setting value, the texture and detail of the picture become sharper.
Setting items Description Brightness [BRIGHTNESS] Adjusts the brightness of the picture. The higher the setting, the brighter the picture. The lower the setting, the darker the picture. You can make adjustments by pressing the BRIGHTNESS +/- on the remote control. Color Adjusts the color density. The higher the setting, the greater the intensity. The lower the setting, the lower the intensity. Hue Adjusts the color tone. The higher the setting, the more greenish the picture becomes.
Setting items MPEG NR (MPEG Noise Reduction) Description Reduces block noise and mosquito noise, in particular in digital signals. Auto: Detects the noise level to reduce the block noise and mosquito noise of the picture automatically. High/Middle/Low: Select a setting according to the block noise and mosquito noise of the input signal source. Off: The MPEG NR (MPEG noise reduction) function is not applied. Tip The noise level may not be detected accurately with “Auto” depending on the input signal source.
Setting items x.v.Color Description Set this item when connecting the unit with equipment that supports x.v.Color and playing back an x.v.Color video signal. On: You can play back an x.v.Color video signal. Off: The “x.v.Color” function is not applied. Tip Setting x.v.Color to “On” disables gamma adjustment. HDR Sets how to play back HDR content. Auto: Distinguishes HDR content automatically and applies the optimal picture quality. When an input signal supports BT.2020, the “Color Space” is set to “BT.
Screen Menu You can set the picture size, aspect mode, etc. Note These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (page 54). Item names in brackets represent those printed on the remote control. Setting items Description Aspect [ASPECT] You can set the aspect ratio of the picture to be displayed for the current input signal (page 16).
Setting items Description Tips • When you select “V Stretch” or “Squeeze,” select the anamorphic lens type from “Anamorphic Lens” in the Installation menu. • Selectable aspect modes vary depending on the input signal (page 57). • The aspect cannot be selected for an input signal from a computer, or an input signal with a resolution of 4096 × 2160 (pages 52, 53, 57). Blanking This feature allows you to adjust the displayable region within the four directions of the screen.
Setup Menu The Setup menu is used to change the factory preset settings, etc. Setting items Description Status Sets whether or not the on-screen display is displayed. Set to “Off” to turn off the on-screen displays except for certain menus, message when turning off the power, and warning messages. Language Selects the language used in the menu and on-screen displays. Menu Position You can change the position to display the menu on the screen.
Setting items Description Network Management On: Set when connected to the network and continuously communicating with the projector control equipment. Note When Network Management is set to “On,” the network function is continuously enabled. Set Network Management to “Off” for normal use. If you set to “On,” the power consumption increases. Power Saving Sets the power saving mode. Standby: If no signal is input for 10 minutes, power is turned off automatically and the projector goes into standby mode.
Function Menu The Function menu is used for changing the settings of the various functions of the unit. Setting items Description 3D Settings You can change the settings of the 3D function. 2D-3D Display Sel. For Switching the video images to “2D” or “3D.” Auto: Displays 3D video images when HDMI signals with 3D information* are input. Displays 2D video images when other signals are input. 3D: Displays 3D video images according to the 3D system selected in “3D Format.
Setting items 3D Depth Adjust Description For adjusting the depth of the 3D video images on the screen. The setting can be made only when a 3D Format other than “Simulated 3D” is selected. Depth Front Normal Depth We recommend that “3D Depth Adjust” be set to “0.” The 3D video images may be difficult to perceive, depending on the setting of “3D Depth Adjust.” Simulated 3D Effect For adjusting the 3D effect when 2D content is converted to 3D video images.
Items Locked by Settings Lock Group 1 Group 2 Picture menu Setup menu Reset Reality Creation Contrast Enhancer Lamp Control Motionflow Contrast Brightness Color Hue Color Temp. Sharpness NR MPEG NR Smooth Gradation Film Mode Gamma Correction Color Correction Clear White x.v.
Installation Menu The Installation menu is used for changing the installation settings. Setting items Description Image Flip Flips the picture on the screen horizontally and/or vertically. HV: Flips the picture horizontally and vertically. H: Flips the picture horizontally. V: Flips the picture vertically. Off: The picture does not flip. Use this item for installation for the backside projection or ceiling installation.
Setting items Description Panel Alignment This feature allows you to adjust the gaps in the color of characters or the picture on the screen. Adjust: Adjusts the gaps in the colors selecting “Adjust Color” or “Adjust Item.” Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments. Zone: Selects the desired range and makes adjustments. Adjust Color: Assigns the desired color to adjust the gaps in color.
Setting items Description Network Setting Perform internet protocol settings. IPv4 Setting IP Address Setup: Selects the IP address setting method. Auto (DHCP): The IP address is assigned automatically from the DHCP server such as a router. Manual: Specifies the IP address manually. When “Manual” is selected for “IP Address Setup,” input “IP Address,” “Subnet Mask,” and “Default Gateway.” Select each item with the M/m buttons, then press button.
Information Menu The Information menu displays the model name, serial number, input signal type/format, software version and the cumulated hours of usage of the lamp. Signal type Items Description Model Name Displays the model name Serial No. Displays the serial number. Signal type Displays the resolution of the input signal which you are selecting. When input signals with 3D information are input, the type of input signals and the 3D format are displayed.
Using Network Features Connection to the network allows you to operate the following features: • Checking the current status of the unit via a Web browser. • Making the network settings for the unit. • Network monitoring and controlling with control protocol (SDAP [Advertisement], SDCP [PJ Talk], DDDP [AMX], Crestron RoomView, Control4). Displaying the Control Window of the Unit with a Web Browser 1 Connect the LAN cable.
Operating the Control Window Switching the Page Click one of the Page Switching buttons to display the desired setting page. Once you make the network settings, you can open the Control window only by performing step 3 of this procedure. Page Switching buttons Setting the Access Limitation You can limit a user for accessing any particular page.
Entry area for [Administrator] Entry area for [User] The password can be changed in the Password page in the Setup page. When you change the password, input a new password after deleting the password (*****) that was set. The password of the administrator and user should be 8 to 16 characters that includes both alphabet and numeric characters. Alphabet is case-sensitive. The default password “Projector” cannot be set as a new password.
Error Handling Troubleshooting If the unit appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy The power is not turned on. The power may not turn on if you turn the power off with ?/ 1 (ON/STANDBY) button and turn it on again in a short time. After about 1 minute, turn the power on. – Close the lamp cover securely, then tighten the screws securely.
Symptom Cause and Remedy Image is left on the screen. (image retention) When high contrast non-moving images are displayed for a long period of time, there may be some image retention on the screen. This is only a temporary condition. Turning off the power for a while will eliminate the retained image. Page – On-screen display Symptom Cause and Remedy On-screen display does not appear. Set “Status” on the Setup Page menu to “On.” Check if the ON/STANDBY indicator should light in green.
Others Symptom Cause and Remedy The fan is noisy. Check the setting of “High Altitude Mode” on the Setup menu. The lens shift cannot be adjusted. Page 29 Make sure that the room temperature is not too high. – Check the installation requirements of the unit. Fan speed increases to maintain the product reliability of the projector’s components in a room, where the temperature is higher than normal. The fan noise becomes slightly louder. The approximate normal temperature is 25°C (77°F).
Warning Indicators The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with your projector. ON/STANDBY indicator Flashing/Lighting indicators (Lights in red) (Flashes in red) WARNING indicator The number of flashes Cause and Remedy Twice Close the lamp cover securely, then tighten the screws securely (page 48). Three times The temperature of lamp is unusually high. Turn off the power and wait for the lamp to cool, then turn on the power again.
Message Lists Warning messages Symptom Cause and Remedy Page High temp.! Lamp off in 1 min. Turn off the power. – Check to ensure that nothing is blocking the ventilation holes. 3, 4 Frequency is out of range! Frequency is out of range. Input a signal that is within the acceptable frequency range of the unit. 52 Please replace the Lamp. It is time to replace the lamp. Replace the lamp. If this message appears again after you replace the lamp, the lamp replacement process is not complete.
Others Updating the Software About the simulated 3D feature You can download files to update the software of the unit. Copy the downloaded files to your USB memory, insert the USB memory to the USB terminal of the unit, then perform the update. To use the features updated, insert a USB memory device into a PC connected to the internet. Download the update files from the following Sony website: https://esupport.sony.com/ The website also explains how to install the update.
• Be sure to turn off the unit and unplug the power cord before replacing the lamp, then check the ON/STANDBY indicator has already been turned off. Replacing the Lamp The lamp used for the light source has a certain lifespan. When the lamp dims, the color balance of the picture becomes strange, or “Please replace the Lamp.” appears on the screen, the lamp may be exhausted. Replace the lamp with a new one (not supplied) without delay.
6 5 Push in the new lamp by the handle securely until it reaches the end, and then tighten the 3 screws. Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. Note Be careful not to touch the optical block inside the unit. 7 Close the lamp door (inner cover), and then tighten the screw. 8 Close the lamp cover. Handle Notes • Do not loosen other screws except the 3 specified screws. • Hold the lamp by the handle to remove and attach it.
9 Wipe dust off the ventilation holes (intake) with a soft cloth. • The unit will not turn on unless the lamp cover are securely closed. • To clear a message displayed on the screen, press any button either on the remote control or the control panel of the unit once. Note on replacing the lamp when broken, in the case of a ceiling installation If the lamp breaks, broken lamp pieces may scatter and cause injury.
Disposal of the used lamp Cleaning For the customers in the U.S.A. and Canada Lamp contains mercury. Dispose according to applicable local, state/province and federal laws. For additional information, see www.sony.com/ mercury Cleaning the cabinet • To remove dust from the cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.
Specifications Item Description Display system SXRD panel, projection system Display device Size of effective display area Number of pixels 0.74-inch (18.8 mm) SXRD 26,542,080 pixels (8,847,360 pixels × 3) Projection lens 2.06 times zoom lens (motorized) f = 21.7 mm to 44.7 mm F3.0 to F4.
Notes • The values for mass and dimensions are approximate. • Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. • Information on accessories in this manual is current as of September 2016. Design and specifications of this unit and its optional accessories are subject to change without notice. Preset Signals The following table shows the signals and video formats which you can project using this unit.
Preset memory no. Preset signal (resolution) fH (kHz) fV (Hz) Sync 72 1920 × 1080/50i (Frame packing) 1080/50i (1920 × 1080i) 56.250 50.000 – 74* 3840 × 2160/60p 3840×2160/60p (3840 × 2160) 135.000 60.000 – 75* 3840 × 2160/50p 3840 × 2160/50p (3840 × 2160) 112.500 50.000 – 76* 4096 × 2160/60p 4096 × 2160/60p (4096 × 2160) 135.000 60.000 – 77* 4096 × 2160/50p 4096 × 2160/50p (4096 × 2160) 112.500 50.000 – 78 4096 × 2160/30p 4096 × 2160/30p (4096 × 2160) 67.500 30.
Input Signals and Adjustable/Setting Items The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted/set are not displayed in the menu. Picture menu Item Input signal Component signal Video GBR signal Computer signal Reality Creation z z – Contrast Enhancer z z – Lamp Control z z z Motionflow*1 z z – Contrast z z z Brightness z z z Color z z – Hue z z – Color Temp.
Screen menu Item Aspect* 1 Input signal Component signal Video GBR signal Computer signal z (excluding preset z (excluding preset memory numbers 76 memory numbers 78, to 79 and 96) 79 and 96) – z: Adjustable/can be set –: Not adjustable/cannot be set *1: For further details, refer to the tables in “Aspect Mode” (page 57). Note When connecting a cable such as an HDMI cable, etc.
3D signals Item 720/60p, 720/50p 1080/60i, 1080/50i 1080/24p 1080/60p, 1080/50p Film Mode – z – – x.v.Color z z z z HDR – – – – Aspect*2 z z z z z: Adjustable/can be set –: Not adjustable/cannot be set *1: The item is not available for Frame Packing/Over-Under on 720/60p, or Over-Under on 1080/ 60p. *2: For further details, refer to the tables in “Aspect Mode” (page 57).
Aspect Mode Selectable items vary depending on the type of input signal or 3D format. For details, see the tables below. Items that cannot be selected are not displayed in the menu. 2D Acceptable signals 4096 × 2160 3840 × 2160 1920 × 1080 1280 × 720 720 × 480 720 × 576 Others Preset memory number (page 52) 76 to 79, 96 74, 75, 93 to 95 7, 8, 10 to 14 5, 6 26, 32, 37, 45, 47, 50, 55 – 1.85:1 Zoom – – z z 2.
Motionflow Selectable items vary depending on the type of input signal or 3D format. For details, see the tables below. Items that cannot be selected are not displayed in the menu.
Picture menu Item Storage conditions Calib. Preset For each input connector Reset For each input connector and Calib. Preset Reality Creation Contrast Enhancer Lamp Control Motionflow Contrast Brightness Color Hue Color Temp. D93-D55 Custom 1-5 Gain R For each Color Temp., D93-D55 and Custom 1-5 Gain G Gain B Bias R Bias G Bias B Sharpness For each input connector and Calib. Preset NR MPEG NR Smooth Gradation Film Mode Gamma Correction Color Correction Clear White x.v.
Projection Distance and Lens Shift Range The projection distance refers to the distance between the front of the lens and the projected surface. Projection distance L Projected image Front of the lens The lens shift range represents the distance in percent (%) by which the lens can be shifted from the center of the projected image.
When projecting in 1.90:1 (Native Full Display 17:9) format 1.90 1 Projection distance Unit: m (inches) Projection image size Diagonal Width × Height 80" (2.03 m) 1.80 × 0.95 (71 × 37) Projection distance L 2.32 – 4.77 (91 – 187) 100" (2.54 m) 2.25 × 1.18 (88 × 47) 2.90 – 5.97 (115 – 235) 120" (3.05 m) 2.70 × 1.42 (106 × 56) 3.49 – 7.18 (138 – 282) 150" (3.81 m) 3.37 × 1.78 (133 × 70) 4.38 – 8.98 (173 – 353) 200" (5.08 m) 4.49 × 2.37 (177 × 93) 5.85 – 11.
When projecting in 1.78:1 (16:9) format 1.78 Video display area 1 Projection area Projection distance Unit: m (inches) Projection image size Diagonal Width × Height 80" (2.03 m) 1.77 × 1.00 (70 × 39) Projection distance L 2.44 – 5.01 (96 – 197) 100" (2.54 m) 2.21 × 1.25 (87 × 49) 3.05 – 6.28 (121 – 247) 120" (3.05 m) 2.66 × 1.49 (105 × 59) 3.67 – 7.55 (145 – 297) 150" (3.81 m) 3.32 × 1.87 (131 × 74) 4.60 – 9.44 (181 – 371) 200" (5.08 m) 4.43 × 2.49 (174 × 98) 6.15 – 12.
When projecting in 2.35:1 format 2.35 Video display area 1 Projection area Projection distance Unit: m (inches) Projection image size Diagonal Width × Height 80" (2.03 m) 1.87 × 0.80 (74 × 31) Projection distance L 2.41 – 4.96 (95 – 195) 100" (2.54 m) 2.34 × 0.99 (92 × 39) 3.02 – 6.22 (119 – 244) 120" (3.05 m) 2.80 × 1.19 (110 × 47) 3.64 – 7.47 (143 – 294) 150" (3.81 m) 3.51 × 1.49 (138 × 59) 4.55 – 9.35 (180 – 368) 200" (5.08 m) 4.67 × 1.99 (184 × 78) 6.08 – 12.
Dimensions Front Unit: mm (inches) 495.6 (19 1/2) 247.8 (9 3/4) Center of the lens 108 (4 1/4) 195.3 (7 11/16) 202.3 (7 31/32) 247.8 (9 3/4) Bottom Unit: mm (inches) 98 (3 27/32) 98 (3 27/32) 81.5 (3 7/32) 81.5 (3 7/32) 187.9 (7 13/32) 187.9 (7 13/32) Front of the cabinet 87.3 (3 7/16) 142.8 (5 5/8) 150.6 (5 15/16) 408.9 (16 3/32) 463.6 (18 1/4) 64 7.
The distance between the front of the lens and the front of the cabinet Unit: mm (inches) 36.
Side view Unit: mm (inches) 213.5 (8 13/32) 130 (5 1/8) Front of the cabinet 258.5 (10 3/16) 463.6 (18 1/4) Top view Unit: mm (inches) 213.4 (8 13/32) 130 (5 1/8) Front of the cabinet 258.5 (10 3/16) Upper ceiling mount bracket Center of the supporting pole (The center of the supporting pole is different from that of the unit.
Holes for the ceiling mount Use the screws with a length of 5.3 mm (7/32 inches, minimum) to 7.6 mm (5/16 inches, maximum) for the ceiling mount. Recommended tightening torque (tension when turning a screw towards the direction of rotation): 1.4 ± 0.
Connecting to Video equipment or a computer .......................................... 11 Connectors ................................................. 3 Contrast ................................................... 23 Contrast Enhancer ................................... 23 Control panel .............................................4 Index Numerics 3D glasses 3D glasses communication range ....... 14 Using the 3D glasses ........................... 14 3D Settings 2D-3D Display Sel. (Select) ...............
Signal type ............................................... 37 Smooth Gradation ................................... 25 Software Version ..................................... 37 Specifications .......................................... 51 Status ....................................................... 29 Information ......................................... 37 Installation .......................................... 34 Operation ............................................ 20 Picture .........................
© 2017 Sony Corporation
