Owner's Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM3
Listening to music from a device via Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and perform basic remote
control operation of the Bluetooth device via a Bluetooth connection.
A2DP (Advanced Audio Distribution Profile)
You can enjoy high-quality music wirelessly.
AVRCP (Audio Video Remote Control Profile)
You can play music, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Hint
In the factory setting, when you listen to music while wearing both units of the headset, the headset will pause music playback if
only one unit is removed. When the removed unit is worn again, the headset will resume music playback.
The headset supports SCMS-T content protection. You can enjoy music and other audio on the headset from a device such as a
portable TV that supports SCMS-T content protection.
Wear the headset.
Put the headset with the
(left) mark on your left ear and the (right) mark on your right ear. The left unit has a
tactile dot.
Be careful not to come in contact with the touch sensor when you wear the headset.
A: Tactile dot
B: Touch sensor
1
Connect the headset to a Bluetooth device.
2
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
45