Application Guide

ManualsBrandsSony ManualsEarbud HeadphonesSony Wireless Bluetooth in Ear Headphones: Noise Cancelling Sports Workout Ear Buds for Exercise and Running - Cordless, Sweatproof Sport Earphones, Built-in Microphone, Extra Bass –Pink WF-SP700N/P

Firmware update 4.2.0

Adds support for Amazon Alexa

Applicable Models

This information is for the following models:

 WH-H900N

 WF-SP700N

 WI-SP600N

 WI-C600N

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all

countries.

About this download

Benefits and Improvements from the latest update

 Adds support for Amazon Alexa

 Adds support for the Voice Guidance language selection feature (WI-C600N only)

Note:

In order to use Amazon Alexa or the Voice Guidance language selection feature (WI-C600N only),

the Sony | Headphones Connect application, version 5.0.0 or later, will need to be installed.

Previous Benefits and Improvements

 Optimizes the headphones for Google Assistant

IMPORTANT:

Installing this firmware will only make your headphones compatible with the Google Assistant.

The Google Assistant itself will be activated by Google in the course of 2018. Depending on your

country, activation might vary.

Note:Google and Android are trademarks of Google LLC.

System Requirements

 An Android device (V5.0 or later) or an iOS device (iOS 11.0 or later)

 An active Internet connection

Summary of content (8 pages)

PAGE 1
Firmware update 4.2.0 Adds support for Amazon Alexa Applicable Models This information is for the following models:  WH-H900N  WF-SP700N  WI-SP600N  WI-C600N IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.
PAGE 2
 The latest version of the "Sony | Headphones Connect (v5.0.0 or higher)" application must be installed.  The headphones must be connected to your Android or iOS device File Info File Name  Firmware update 4.2.0 for WH-H900N / WF-SP700N / WI-SP600N / WI-C600N File Version  Version 4.2.0 Release Date  06-04-2019 Before You Start Check the firmware version If the firmware is version "4.2.0" or above, you do not need to perform the update.
PAGE 3
. Tap the three dots (menu button) in the upper right corner. 4. Select the Version of your device shown in the Menu. This item is shown only when the device is connected. 5. Confirm the firmware version. Important notice DO NOT charge the battery or turn off your headphones while downloading updates, transferring data, or updating. Doing so may cause the headphones to become unusable.
PAGE 4
Disconnect all other Bluetooth devices such as wearable devices or smart watches from your Android/iOS device before starting the update. Before you upgrade Once updated, the firmware cannot be reverted to an earlier version.  WH-H900N For Android devices, the update process will take approximately 25 minutes to complete. (The file size is about 3.3 MB) For iOS devices, the update process will take approximately 35 minutes to complete. (The file size is about 3.
PAGE 5
3. Execute update with the headphones. Step 1: Install the update 1. Launch the "Sony | Headphones Connect" application. 2. Connect your headphones to the "Sony | Headphones Connect" application.  If you have never connected to the "Sony | Headphones Connect" application before, follow the instructions on the screen to connect the headphones to your Android device.  If you have connected to the "Sony | Headphones Connect" application before, select your headphones. 3.
PAGE 6
the product into the case and try again from the beginning. 5. Verify that "Version 4.2.0" is displayed and press "OK" to start the update.
PAGE 7
6. Once the download starts, it will automatically move to the next screen after the download is completed. NOTE: When the message [Bluetooth Pairing Request] is displayed, press "Pair". The update will resume. (Only for iOS devices.) 7. The transfer starts. It will automatically move to the next screen after the download has been completed. 8. Once the transfer starts, it will automatically move to the next screen after the transfer has been completed. This will take approximately one minute.
PAGE 8
 WF-SP700N After the update, store the headphones into the battery charger and remove the headphones from the battery charger, and confirm that the new version has been installed successfully by following the steps in the [Check the firmware version] section. If the firmware version shown is "4.2.0", the upgrade was successful. Questions & Answers An update error message appears. 1. Press "OK". 2. Turn the power off then on to restart the headphones. 3.