User Manual

Help Guide

Wireless Noise Canceling Stereo Headset

WF-SP700N

One-touch connection (NFC) does nor work

Remove the headset from the charging case and make sure that the headset is turned on.

Keep the smartphone close to the N-mark on the back side of the charging case until the smartphone reacts. If it still

does not react, move the smartphone left, right, back, and forth slowly.

Check that the NFC function of the smartphone is set to On.

If the smartphone is in a case, remove it.

NFC reception sensitivity varies depending on the smartphone. If the connection repeatedly fails, connect/disconnect

by operating the smartphone.

You cannot make a one-touch connection (NFC) while charging the battery because the headset cannot be turned

on. Finish charging first, and then make the one-touch connection (NFC).