Other Content

 Walkman
 Android device (smartphone, tablet)
 iOS device (iPhone, iPad)
 Windows 7
 Windows 8
 Windows 10
 Mac
 Sony Android TVs
NOTE: Not all Sony Android TVs can be use with Bluetooth headphones or speakers,
please verify that your TV model is in the list.
Helpful information on Bluetooth pairing
Once Bluetooth devices are paired, there is no need to pair them again, except in the
following cases:
 When you perform a factory settings reset, all pairing information is deleted.
 Pairing information has been deleted after repair, etc.
 If you exceed the maximum number of Bluetooth devices that can be paired (approx. 8),
the oldest pairing information will be overwritten and replaced by any new pairing
information.
 When the pairing information for the headset has been deleted from the Bluetooth source
device.
Preparation
Before you start the pairing operation, please confirm the following:
 Refer to the operating instructions, or help guide for model-specific information.
 Place the source device within 1 m (3 feet) of the Bluetooth speaker.
 Make sure the Bluetooth speaker and source device are both sufficiently charged.
Bluetooth Speaker pairing procedure
1. Turn on the speaker. The (power) indicator will light up or/and the (Bluetooth)
indicator begins to flash.
NOTE:
o When you turn on the speaker for the first time after purchase, the (Bluetooth)
indicator will begin to flash quickly and the speaker automatically enters pairing
mode. Proceed to step ３.
o When you turn on the speaker, the speaker tries to make a Bluetooth connection
with the last connected Bluetooth device. If that device is nearby and its
BLUETOOTH function is on, the BLUETOOTH connection will established
automatically and the (Bluetooth) indicator will stay lit. When you want to