Operating Instructions

9
EN
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
• Locate the beginnings of tracks on the
tape. Rotate and hold the control, then
release it to fast-wind the tape.
• Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
• Tune in the stations automatically.
Rotate and hold the control to tune in the
specific station.
By rotating the control while
pushing in (the PRESET/DISC
control)
Push in and rotate the control to :
• Receive the stations memorized on the
preset buttons.
• Change the disc.
Other operations
Other Functions
You can connect an optional rotary remote
(RM-X2S) with this unit.
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD/MD changer
by the rotary remote.
By pressing buttons (the SOURCE
and the MODE buttons)
Every time you press (SOURCE), the
source changes as follows:
TAPE n TUNER n CD/MD
Pressing (MODE) changes the operation in the
following ways:
• the tape transport direction.
• the band, FM1 n FM2 n AM1 n AM2.
• the CD/MD changer.
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary remote.
Radio/Other Functions
(SOURCE)
(MODE)
OFF
Rotate the VOL control
to adjust the volume.
Press (MUTE) to
mute the sound.
Press (DSPL) to change
the display items.
Press
(SOUND) to
select the
volume and
adjust the
sound
characteristics.
Press(OFF) to
turn off the
unit.