User Guide

15
INPUT
CONTROL
XAV
To the +12 V power terminal which is
energized at all times
*1
*1Be sure to connect the black ground lead to it first.
*2First connect the black ground lead, then connect the yellow and red power input leads.
*3When your car has built-in FM/AM antenna in the rear/side glass, see “Notes on the control and power
supply leads” (previous page).
*4This connection is only for amplifiers. Connecting any other system may damage the unit.
*5It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-
operated telescopic antenna.
Note on the accessory power input lead (red)
If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times.
Bus cable (5.3 m) (supplied with XT-63V)
RCA interconnects
(5.3 m) (supplied with
XT-63V)
TV tuner unit
XT-63V
(optional)
Connection
box 1
Main unit/
connection box
interconnect 3
Front speakers
(optional)
Rear speakers
(optional)
Active subwoofer
(optional)
Media Center
main unit
Power
supply leads
2 (for main
unit)
Yellow (0.25 m)
Red (0.25 m)
Orange/white (0.25 m)
Light blue (0.25 m)
Fuse (10 A)
Light green (2 m)
Parking brake switch lead of car
Tap 5
To the +12 V power terminal which is
energized in the accessory position of
the ignition key switch
*1*3
To a car’s illumination signal
*1
To ATT (the interface cable of a car
telephone)
To a metal surface of the car
*2
Blue/white (0.25 m)
Blue (0.25 m)
To AMP REMOTE IN of an optional
power amplifier
*4
To the power antenna control lead or
power supply lead of antenna booster
amplifier
*3*5
Rotary
Commander
RM-X4S
(optional)
Front speakers
(optional)
Rear speakers
(optional)
White
White/black
Gray
Gray/black
Green
Green/black
Purple
Purple/black
RCA interconnects
(optional)
RCA interconnects
(optional)
RCA interconnects
(optional)
Left
Right
Left
Right
From car
antenna
Black (0.45 m)
Max. supply current 0.3 A
Max. supply current 0.1 A
Amplifiers
(optional)