User Guide

11
ANGLE
OPEN/
CLOSE
SOURCE
SEEK
MODE
TA
.
>
VOL
Listening to CD/MD/”MG
Memory Stick”
Preparation: To listen CDs, MDs, or “MG Memory
Sticks” on this unit, an optional Sony CD/MD changer
and/or MG Memory Stick system-up player must be
connected to the connection box.
1 Select CD, MD, or MS.
With each press of the SOURCE button, the selection is switched in the order:
FM/MW/LW t CD* t MD*/MS* t VIDEO.
* Displayed only if respective optional component is connected.
3 Select a
disc.
Press V or v on
the card remote
commander to
select a disc.
(page 9)
Adjust volume
2 Select changer.
With each press of the MODE button, the
selection is switched in the order:
CD: CD1 t CD2 t CD3 t ...
MD: MD1 t MD2 t MD3 t ...
Locating a desired spot (manual search)
Hold down SEEK/AMS –/+ and release it at the desired spot.
Locating the start of a track
(Automatic Music Sensor [AMS])
Press SEEK/AMS –/+ lightly once for each track you want to skip.
Cautions when connecting MGS-X1 and MD unit(s)
This unit recognizes MGS-X1 as an MD unit.
• When you want to play MGS-X1, press SOURCE to select “MS” or “MD.” If “MS” appears in the source display,
MGS-X1 starts to play. If “MD” appears in the source display, press MODE to select “MS”, to start playback.
• When you want to play an MD unit, press SOURCE to select “MD” or “MS.” If your desired MD unit appears in the
source display, it starts to play. If “MS” or another MD unit appears in the source display, press MODE to select
your desired MD unit, to start playback.