User Guide

51
Error displays
BLANK
(Blank Disc*)
ERROR
(Error*)
HI TEMP
(High Temp*)
NO DISC
(NO Disc*)
NO MAG
(NO Magazine*)
NO MUSIC
(NO Music*)
NOTREADY
(Not Ready*)
RESET
(Push Reset*)
Cause
MD is not recorded.
Disc is inserted upside down.
MD cannot be played.
CD is dirty.
Unit has become too hot.
No disc is inserted in changer.
No magazine is inserted in changer.
CD does not contain music information.
MD changer panel is open.
Operation is impaired due to an unspecified
problem.
CD/MD error displays/Messages
When there is a problem related to a CD or MD changer connected to the unit, an alarm tone is
heard and a flashing error indication is shown for 5 seconds.
Remedy
Insert other MD.
Insert disc correctly.
Insert other MD.
Clean CD.
Turn power off and wait a while.
Insert disc.
Insert magazine.
Insert other CD.
Close panel.
Press the reset button on the unit.
* Shown in the LCD monitor.
Messages
LCL Seek +/–
NO AF
“ “ or
“ “
Description
The Local Seek mode is on during automatic tuning (page 19).
There is no alternative frequency for the current station.
You have reached the beginning or the end of the disc and you cannot go any further.
No traffic announcements.
,Active “TA.”
,The station does not broadcast any traffic
announcements despite being TP.
, Tune in another station.
The cursor “Bb“ does not appear
on the PTY list.
, The current station is not an RDS station.
, RDS data has not been received.
, The station does not specify the
programme type.