5-035-401-12(1) AV RECEIVER Operating Instructions GB Mode d’emploi FR Manual de instrucciones ES Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. XAV-AX4000 Serial No. To cancel the demonstration (Demo Mode) display, see page 6. Pour annuler l’affichage de démonstration (Mode démo), reportez-vous à la page 6.
Warning For safety, be sure to install this unit in the dashboard of the car as the rear side of the unit becomes hot during use. For details, see “Connection/Installation” (page 9). The nameplate indicating operating voltage, etc., is located on the bottom of the chassis. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. FOR THE CUSTOMERS IN THE USA.
Warning if your car’s ignition has no ACC position Do not install this unit in a car that has no ACC position. The display of the unit does not turn off even after turning the ignition off, and this causes battery drain. Disclaimer regarding services offered by third parties Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.
Guide to Parts and Controls Screen Displays Playback screen: Main Unit ȩ Ȫ Ǵ ǵ Ƕ ȫȬ ȭ Ȯ ȯ HOME1 screen: The VOL (volume) + button has a tactile dot. HOME Displays the HOME screen. Ƿ Ǹ STANDBY Press and hold to turn off the unit. Press and hold for more than 10 seconds to reset the unit. VOL (volume) +/– Custom Registers functions (Mute, Disp. Off, Source Change). To register, select [Settings] [Customize] [Custom Button].
Status indication (left side) (back) (list) Returns to the previous display. Opens the list. The available lists differ depending on the source. Status indication (right side) Apps icon list Android Auto Apple CarPlay Radio SiriusXM Bluetooth RearCam Settings USB Devices Phone Gauges*1*2 Park Assist*1*2 Displays the time which was set on the Date/Time setting. Vehicle Info*1*2 Climate*1*2 Satellite Radio*1*2*3 (mute) Lights up when the sound is muted.
To pair from the BLUETOOTH device Basic Operations Using Apple CarPlay Wirelessly When using Apple CarPlay for the first time, device registration is required. Follow the procedure in “Pairing with a Bluetooth® Device” (page 6). Note Make sure the GPS antenna (aerial) is connected. For details, see “Installing the GPS antenna (aerial)” (page 12).
Additional Information Precautions Note on safety Comply with your local traffic rules, laws, and regulations. Specifications FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna (aerial) performance, operating system, software application, etc. *2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. Wi-Fi section Compatible standards: IEEE802.11 a/n/ac Radio frequency: 5 GHz band (5.725 GHz - 5.850 GHz) Output power: Max.
Connection/Installation Parts List for Installation Power supply leads (1) Connection cables (Audio/Camera) (1) Mounting screw (5 × max. 9 mm (7/32 × max. 3/8 in)) (4) Microphone (1) Flat-mount base (1) Double-sided tape (1) USB Type-C extension cable (1) Cable for steering wheel remote input (RC-SR1) (1) GPS antenna (aerial) (1) Metal plate (1) Cautions • Do not install this unit in a car that has no ACC position.
Connection • To prevent short circuits, insulate leads with a cover or tape. • Note that the unit may be damaged if it is connected incorrectly or by short circuits at the leads.
*1 *2 *3 *4 *5 *6 Not supplied Speaker impedance: 4 Ω to 8 Ω × 4 RCA pin cord (not supplied) Power amplifier (not supplied) Subwoofer (not supplied) Depending on the type of car, use an adaptor for a steering wheel remote control (not supplied). For details on using the steering wheel remote control, see “Using the steering wheel remote control” (page 13). *7 Depending on the type of car, use an adaptor (not supplied) if the antenna (aerial) connector does not fit.
1 Installing the microphone To capture your voice during handsfree calling, you need to install the microphone . Choose a flat surface where: the GPS antenna (aerial) can be positioned horizontally. operation of the passenger-side airbag is not impeded. GPS satellite reception is not blocked by anything inside the car or the windshield (windscreen) wipers. Clip (not supplied) Decide the installation location on the dashboard, then clean the attachment surface.
Using the steering wheel remote control When using the steering wheel remote control Installation of the connection cable RC-SR1 is required before use. 1 Select [Settings] [System] [Steering Wheel Settings]. 2 Set the [Custom] switch to [On]. Using a USB device Installation of the USB Type-C extension cable is required before use. 1 Connect the USB Type-C extension cable to the USB port at the back panel of the unit.
Installation Mounting the unit in a Japanese car You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Example to dashboard/center console Bracket Bracket Existing parts supplied with your car When mounting this unit to the preinstalled brackets of your car, use the mounting screws in the appropriate screw holes based on your car: T for TOYOTA and N for NISSAN. Note To prevent malfunction, install only with the mounting screws .
REQUIREMENTS AND LIMITATIONS About License END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE. This EULA is a legal agreement between you and Sony Electronics Inc. (“SONY”).
applicable to OPEN SOURCE COMPONENTS require SONY to make an offer to provide source code in connection with the SOFTWARE, such offer is hereby made. USE OF SOFTWARE WITH COPYRIGHTED MATERIALS The SOFTWARE may be capable of being used by you to view, store, process and/or use content created by you and/or third parties. Such content may be protected by copyright, other intellectual property laws, and/or agreements.
SERVICES (INCLUDING THE INTERNET) OR PRODUCTS (OTHER THAN THE SOFTWARE) UPON WHICH THE SOFTWARE’S PERFORMANCE DEPENDS WILL CONTINUE TO BE AVAILABLE, UNINTERRUPTED OR UNMODIFIED, AND (E) REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. SOFTWARE or this EULA.
only in favor of the party seeking relief, and only to the extent necessary to provide relief warranted by that party’s individual claim. Any court with jurisdiction over the parties may enforce the arbitrator’s decision.
jurisdiction. EXCEPT TO THE EXTENT PROHIBITED BY LAW, SONY AND YOU EXPRESSLY WAIVE TRIAL BY JURY WITH RESPECT TO ANY MATTERS OR DISPUTES ARISING UNDER OR RELATING TO THIS EULA. Any claim or cause of action arising under this EULA must be commenced within one (1) year after the claim or cause of action arises.
If you have any questions/problems regarding this product, try the following: 1 Read Troubleshooting in Help Guide (online manual). 2 Please contact (U.S.A. only); Call 1-800-222-7669 URL https://www.SONY.com ©2022 Sony Corporation Printed in Thailand https://www.sony.
Help Guide In-Car Receiver XAV-AX4000 Use this manual if you encounter any problems, or have any questions. Note: The unit sold in some countries/regions may differ from the picture above.
Connecting with a Paired BLUETOOTH Device Using a Rear View Camera Smartphone Connection Apple CarPlay Android Auto Radio Listening to the Radio Listening to the Radio Tuning Using Radio Option Functions Listening to the SiriusXM Radio (XAV-AX4000(UC)) Listening to the SiriusXM Radio Tuning Channels for SiriusXM Tuning the Channel by Inputting its Channel Number Tuning the Channel from the Channel List or Category List Setting a Parental Control Using SXM Option Functions Playback Playing a USB Device
Available Operations during a Call iDataLink Maestro (XAV-AX4000(UC)) Getting iDataLink Maestro Ready Using iDataLink Maestro Settings Basic Setting Operation Device Connection Sound Customize Application System Additional Information Canceling the Demonstration Mode Sorting Apps on the Apps Area (Favorite) Updating the Software Precautions Supported Formats for USB Playback About iPhone Notice on License Maintenance Specifications Copyrights Troubleshooting Troubleshooting General There is no beep soun
Menu items cannot be selected. The unit cannot be operated. Display The display does not turn on. Touch Screen The touch screen does not react to your touch correctly. Multi-touch is not recognized. Device Connection A suffix such as “-2”, “-3”, ... appears after the name of the device on [Device Connection]. Radio The radio reception is poor. / Static noise occurs. The stations cannot be received. (XAV-AX4000(E)/XAV-AX4000(E17)/XAV-AX4000(IN)) Picture There is no picture or picture noise occurs.
The volume of the connected BLUETOOTH device or apps is low or high. The sound skips during audio streaming or the BLUETOOTH connection fails. The connected BLUETOOTH device cannot be controlled during audio streaming. Some functions do not work. A call is answered unintentionally. Pairing failed due to time out. Cannot pair. The BLUETOOTH function cannot be operated. No sound is output from the car speakers during a handsfree call.
Help Guide In-Car Receiver XAV-AX4000 Main Unit and Remote Commander Main unit The VOL (volume) + button has a tactile dot. RM-X400 remote commander (XAV-AX4000(E)/XAV-AX4000(E17)/XAV-AX4000(IN)) The remote commander can be used to operate the audio controls. For menu operations, use the touch screen. The VOL (volume) +/ (play/pause) buttons have a tactile dot. Note The / (up/down) buttons in the illustration above are not supported.
Remove the insulation film before use. Hint For XAV-AX4000(UC), the RM-X400 remote commander is available online at https://encompass.com. 1. HOME 2. 3. 4. 5. 6. 7. 8. 9. 10. Displays the HOME screen. STANDBY Press and hold to turn off the unit. Press and hold for more than 10 seconds to reset the unit. VOL (volume) +/– Custom Registers functions (Mute, Disp. Off (display off), Source Change). To register, select [Settings] [Customize] [Custom Button].
[USB]: fast-reverse/fast-forward. [Bluetooth Audio]: fast-reverse/fast-forward. Functions differ depending on the BLUETOOTH device.
Help Guide In-Car Receiver XAV-AX4000 Screen Displays Playback screen: HOME1 screen: HOME2 screen: 1. Status indication (left side) Icon in the display (back) (list) Detail Returns to the previous display. Opens the list. The available lists differ depending on the source. 2.
Icon in the display Clock (mute) (option) (device) (antenna) (battery) Detail Displays the time which was set on the Date/Time setting. Lights up when the sound is muted. Opens the source option menu. The available items differ depending on the source. Displays the device’s name to connect to the unit. Indicates the signal strength status of the connected mobile phone. Indicates the remaining battery status of the connected mobile phone. 3.
Icon in the display Name Devices Phone Gauges *1*2 Park Assist *1*2 Vehicle Info *1*2 Climate *1*2 Satellite Radio*1*2*3 Bluetooth Audio*1*2*3 Media Player*1*2*3 *1 *2 *3 When connecting the iDataLink Maestro module (not supplied), the icon is displayed. Available functions differ according to your car type. The display names differ according to your car type.
Help Guide In-Car Receiver XAV-AX4000 Performing Initial Settings You need to perform initial settings before operating the unit for the first time, after replacing the car battery, or changing connections. If the initial settings screen does not appear when you turn on the unit, perform the factory reset to initialize the unit. 1 Touch [Language], then set the display language. To return to the previous display, touch (back).
Help Guide In-Car Receiver XAV-AX4000 Using Apple CarPlay Wirelessly When using Apple CarPlay for the first time, device registration (called “pairing”) is required. Pairing enables this unit and your iPhone to recognize each other. Note Make sure the GPS antenna (aerial) (supplied) is connected. 1 Place your iPhone within 1 m (3 ft) of this unit. 2 Press HOME, then touch [Settings]. If [Settings] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Settings].
Apple CarPlay may not be available in your country or region.
Help Guide In-Car Receiver XAV-AX4000 Using Android Auto™ Wirelessly When using Android Auto for the first time, device registration (called “pairing”) is required. Pairing enables this unit and an Android Auto compatible Android™ phone to recognize each other. 1 Place your Android phone within 1 m (3 ft) of this unit. 2 Press HOME, then touch [Settings]. If [Settings] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Settings].
Related Topic Android Auto Device Connection 5-035-405-11(1) Copyright 2022 Sony Corporation 16
Help Guide In-Car Receiver XAV-AX4000 Using Android Auto with a USB Cable When using Android Auto with a USB cable, connect an Android Auto compatible Android phone to the unit with the USB cable. 1 Connect your Android phone to the USB port. Note While using Android Auto, BLUETOOTH connection is not possible. BLUETOOTH pairing is possible. Android Auto may not be available in your country or region.
Help Guide In-Car Receiver XAV-AX4000 Pairing and Connecting with a Bluetooth® Device You can enjoy music or perform handsfree calling depending on the BLUETOOTH compatible device such as smartphones, mobile phones, and audio devices (hereafter “BLUETOOTH device” if not otherwise specified). For details on connecting, refer to the operating instructions supplied with the BLUETOOTH device. Before connecting the BLUETOOTH device, turn down the volume of this unit; otherwise, a loud sound may result.
BLUETOOTH connection is not possible while Apple CarPlay or Android Auto is running. BLUETOOTH pairing is possible on the [Device Connection] or [Add New Device] screen.
Help Guide In-Car Receiver XAV-AX4000 Connecting with a Paired BLUETOOTH Device To use a paired BLUETOOTH device, connection with this unit is required. Some paired BLUETOOTH devices will connect automatically. Activate the BLUETOOTH function on the BLUETOOTH device. 1 Press HOME, then touch [Settings]. If [Settings] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Settings]. 2 Touch [Device Connection]. The list of paired BLUETOOTH devices appears.
A. Microphone (supplied) B. Flat-mount base (supplied) C. Double-sided tape (supplied) D.
Help Guide In-Car Receiver XAV-AX4000 Using a Rear View Camera Connect the optional cameras to display the picture from the cameras. A. Connection cables (Audio/Camera) (supplied) B. RCA pin cord (not supplied) C.
Help Guide In-Car Receiver XAV-AX4000 Apple CarPlay Apple CarPlay lets you use your iPhone in the car in a way that allows you to stay focused on the road. Notes on using Apple CarPlay Check the Apple CarPlay website for supported iOS versions. Update to the latest iOS version before use. For details about Apple CarPlay, refer to the manual supplied with your iPhone, or visit the Apple CarPlay website. 1 Connect your iPhone to the unit.
Help Guide In-Car Receiver XAV-AX4000 Android Auto Android Auto extends the Android platform into the car in a way that is purpose-built for driving. Notes on using Android Auto Check the Android Auto website for supported OS versions. Update to the latest OS version before use. Your Android phone needs to support Android Auto. Download the Android Auto app on Google Play. For details about Android Auto, refer to the manual supplied with your Android phone, or visit the Android Auto website.
Help Guide In-Car Receiver XAV-AX4000 Listening to the Radio Press HOME, then touch [Radio]. If [Radio] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Radio]. Reception controls/indications Auto Tune: Manual Tune: A. Preset area Select a preset station. Touch and hold to store the current frequency in that preset. Touch / (up/down) to show the other preset stations. B. Current band Change the band (FM or AM). C. (radio option) Open the radio option menu. D.
G. –/+ Tune in manually. Touch and hold to continuously skip frequencies.
Help Guide In-Car Receiver XAV-AX4000 Tuning 1 Select the desired band (FM or AM). 2 Perform tuning. To tune automatically Touch / (left/right). Scanning stops when the unit receives a station. To tune manually Touch [Manual Tune] to switch the tuning manually. Touch –/+. Touch and hold –/+ to continuously skip frequencies. To store manually While receiving the station that you want to store, touch and hold the preset area.
Help Guide In-Car Receiver XAV-AX4000 Using Radio Option Functions The following functions are available by touching (option) on the top-right of the screen. [BTM (Best Tuning Memory)] Stores stations in order of frequency on the preset numbers. 18 stations for FM and 12 stations for AM can be stored as preset stations. [Alternate Frequency] (XAV-AX4000(E)/XAV-AX4000(E17)/XAV-AX4000(IN)) Selects [On] to continuously retune the station to the strongest signal in a network.
Help Guide In-Car Receiver XAV-AX4000 Listening to the SiriusXM Radio Press HOME, then touch [SiriusXM]. If [SiriusXM] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [SiriusXM]. To activate your SiriusXM Subscription Only SiriusXM brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio.
5-035-405-11(1) Copyright 2022 Sony Corporation 30
Help Guide In-Car Receiver XAV-AX4000 Tuning Channels for SiriusXM Reception controls/indications A. (list) Open the channel list or category list. B. Preset numbers Select a preset channel. Touch / (up/down) to show the other preset channels. Touch and hold to store the current channel in that preset. C. Channel logo, channel name D. (information) Switch the channel information in H. E. Channel number F. (SXM option) Open the SXM option menu. G.
Help Guide In-Car Receiver XAV-AX4000 Tuning the Channel by Inputting its Channel Number 1 Touch the area with the channel number on the SiriusXM radio screen. 2 Input the channel number, then touch [OK].
Help Guide In-Car Receiver XAV-AX4000 Tuning the Channel from the Channel List or Category List 1 Touch (list) on the SiriusXM radio screen. The category list appears. 2 Touch the desired category. To tune from the channel list, touch [All Channels]. 3 Touch the desired channel.
Help Guide In-Car Receiver XAV-AX4000 Setting a Parental Control The parental control feature allows you to limit access to SiriusXM channels with mature content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked channels. Information on setting up the passcode and locking channels can be found below. 1 Touch (option) on the SiriusXM radio screen, then touch [Parental Control]. The passcode input display appears.
Help Guide In-Car Receiver XAV-AX4000 Using SXM Option Functions The following functions are available by touching (option) on the SiriusXM radio screen. [Parental Control] Sets the parental lock to on or off. [Change Passcode] Changes the passcode for the Parental Control feature.
Help Guide In-Car Receiver XAV-AX4000 Playing a USB Device MSC (Mass Storage Class) type USB devices* compliant with the USB standard can be used. * e.g., a USB flash drive, digital media player Note Up to 25,000 files can be read for any type of file stored on a USB device. Store only the supported file formats for USB playback on a USB device. Check the supported file formats for USB playback. 1 Turn down the volume on the unit. 2 Connect the USB device to the USB port.
Help Guide In-Car Receiver XAV-AX4000 Repeat Play and Shuffle Play 1 During USB playback, touch (repeat) or (shuffle) repeatedly until the desired play mode appears. Playback in the selected play mode may take time to start. Available play modes differ depending on the selected sound source and connected device.
Help Guide In-Car Receiver XAV-AX4000 Searching for a File from the List Screen 1 During USB playback, touch (list). The list screen of the currently played item appears. 2 Touch the desired item. Playback starts.
Help Guide In-Car Receiver XAV-AX4000 Playing a BLUETOOTH Device You can play contents on a connected device that supports BLUETOOTH A2DP (Advanced Audio Distribution Profile). 1 Make a BLUETOOTH connection with the BLUETOOTH device. 2 Press HOME, then touch [Bluetooth]. If [Bluetooth] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Bluetooth]. 3 Operate the BLUETOOTH device to start playback.
Help Guide In-Car Receiver XAV-AX4000 Repeat Play and Shuffle Play 1 During playback, touch (repeat) or (shuffle) repeatedly until the desired play mode appears. Playback in the selected play mode may take time to start. Available play modes differ depending on the selected sound source, connected device, and app.
Help Guide In-Car Receiver XAV-AX4000 Preparing a Mobile Phone To use a mobile phone, connect it with this unit. Note The handsfree calling functions are not available when the Apple CarPlay or Android Auto function is activated. In this case, use the handsfree calling functions of the application.
Help Guide In-Car Receiver XAV-AX4000 Receiving a Call 1 Touch (call) when a call is received. The phone call starts. Note The ringtone and talker’s voice are output from the front speakers. To select the speakers for handsfree calling, press HOME, then touch [Settings] and select [Optional Audio Output Channel] in [System]. To reject/end a call Touch (end a call).
Help Guide In-Car Receiver XAV-AX4000 Making a Call 1 Press HOME, then touch [Phone]. If [Phone] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Phone]. 2 Touch one of the call icons on the BLUETOOTH phone display. A. (Call History)* Select a contact from the call history list. The unit stores the last 20 calls. B. (Redial) Make a call automatically to the last contact you made. C. (Contacts)* Select a contact from the name list/number list.
Related Topic Preparing a Mobile Phone 5-035-405-11(1) Copyright 2022 Sony Corporation 44
Help Guide In-Car Receiver XAV-AX4000 Available Operations during a Call To adjust the ringtone volume Press VOL (volume) +/– while receiving a call. To adjust the talker’s voice volume Press VOL (volume) +/– during a call. To adjust the volume for the other party (Mic gain adjustment) During a handsfree call, touch (option), then set [MIC Gain] to [High], [Middle], or [Low].
Help Guide In-Car Receiver XAV-AX4000 Getting iDataLink Maestro Ready Connecting the iDataLink Maestro module (not supplied) to this unit allows you to display the current car status and adjust certain settings. Available functions and settings differ according to your car type and the firmware installed to the iDataLink Maestro module. For more information, visit the following site: https://www.idatalinkmaestro.com/ Sony does not guarantee all operations of the iDataLink Maestro functions and settings.
Help Guide In-Car Receiver XAV-AX4000 Using iDataLink Maestro After installing the iDataLink Maestro module, only available functions and settings are displayed on the HOME screen: Ex., Climate, Gauges, Vehicle Info, Park Assist Climate: You can use this screen to see the status or control the climate control in your car. Gauges: Displays driving information of your car, such as running speed and engine speed.
5-035-405-11(1) Copyright 2022 Sony Corporation 48
Help Guide In-Car Receiver XAV-AX4000 Basic Setting Operation You can set items in the following setup categories: Device Connection, Sound, Customize, Application, System. 1 Press HOME, then touch [Settings]. If [Settings] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Settings]. 2 Touch one of the setup category. The items that can be set differ depending on the source and settings. 3 Touch the item you want to set.
Help Guide In-Car Receiver XAV-AX4000 Device Connection +Add New Device Connects and registers your device to the unit newly. Displays the name of the device connected to the unit. If the name of the connected device is duplicated, a suffix such as “-2”, “-3”, ... will appear after the name. You can switch the device by touching the name of the device you want to connect. When touching , you can perform the following operations. Delete the device by touching [Forget This Device].
Help Guide In-Car Receiver XAV-AX4000 Sound EQ Selects an equalizer curve. (Available when any source is selected.
listening position in 0.1 inch or 1 cm increments (unit switchable) to correct the time it takes for the sound to reach the listening position. Crossover Adjusts the cut-off frequency, slope, and subwoofer phase. Item Detail High Pass Filter Adjusts the cut-off frequency of the front/rear speakers. Low Pass Filter Selects the cut-off frequency of the subwoofer. Slope Adjusts the slope of the front/rear speakers and subwoofer. Phase Selects the subwoofer phase: [Normal], [Reverse].
Help Guide In-Car Receiver XAV-AX4000 Customize Custom Button Registers functions: [Mute/Disp. Off], [Source Change]. Wallpaper Select Changes the wallpaper by touching the desired color or sets your favorite photo data in a MSC (Mass Storage Class) type USB device as a wallpaper. (Available only when photo data are JPEG files of 6 MB or less with a pixel size of 2048 × 1080 or less.) To set a photo data When connecting the USB device to the USB port, touch [+] to display photos.
Help Guide In-Car Receiver XAV-AX4000 Application Camera Display [Rear Camera View] selects a camera view mode: [Normal], [Flipped]. [Rear Camera Interruption] displays the video of the rear view camera connected to the REAR CAMERA IN cable when you put the gear shift in R (reverse). [Rear Camera Guideline Adjust] displays the rear camera guidelines. SXM Reset (XAV-AX4000(UC)) Initializes the SiriusXM Connect Vehicle Tuner settings (preset channels/parental lock): [Reset], [Cancel].
Help Guide In-Car Receiver XAV-AX4000 System Language Selects the display language: [Deutsch], [English], [Español], [Français], [Indonesian], [Italiano], [Nederlands], [Português], [Русский], [简体中文], [繁體中文], [한국어]. Date/Time When receiving the GPS signal before setting [Date/Time], [Date/Time] is set automatically. Item Detail Date Sets the date: [Month], [Day], [Year]. Time Sets the clock time: [Hour], [Minute], [AM/PM]. Date Format Selects the format: [DD-MM-YYYY], [MM-DD-YYYY], [YYYY-MM-DD].
Volume Settings Adjusts the volume level of each source. Item Detail Media Adjusts the volume of media: 0 to 50. Phone Call Adjusts the volume of phone calls: 0 to 50. Ring Tone Adjusts the volume of the ring tone: 0 to 50. Voice Recognition Adjusts the volume of voice recognition: 0 to 50. Maestro Chime (XAVAX4000(UC)) Adjusts the volume of Maestro chime: 0 to 50. (Available only when the connection with iDataLink Maestro is established.
Activates the BLUETOOTH signal: [Off], [On]. Touch Panel Calibration Adjusts the touch screen calibration if the touching position does not correspond with the proper item. Change PSK Changes the Wi-Fi pass key. System Information Displays the system information: [Software Version], [Serial Number], [Wi-Fi Status], [Bluetooth Status], [GPS Status], [Speed Sensor Status]. Software Update Updates the software via USB flash drive or USB tethering.
Help Guide In-Car Receiver XAV-AX4000 Canceling the Demonstration Mode 1 Press HOME, then touch [Settings]. If [Settings] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Settings]. 2 Touch [System], then touch [Demo Mode] to set to [Off]. 3 To exit the setup menu, touch (back) twice.
Help Guide In-Car Receiver XAV-AX4000 Sorting Apps on the Apps Area (Favorite) Up to 5 Apps can be set on the Apps area (Favorite) of the HOME1 screen. Five Apps can be sorted. Touch and hold the App you want to move, then drag it to the place you want to set it to. Apps on the Apps area (Favorite) can be also changed to Apps on the Apps area except for those set to Favorite. HOME1 screen HOME2 screen A. (Apple CarPlay)/ (Android Auto) B. Clock C. Apps area (Favorite) D. All Apps E. Close F.
4 Touch [Close] to return to the HOME1 screen. Note When you want to insert or move the App to the App area (Favorite), make sure the HOME2 screen opens. You cannot insert or move the Apps on the HOME1 screen. Apps on the Apps area (Favorite) are not aligned automatically. The blank between Apps is maintained. Apps except for the Apps area (Favorite) are aligned automatically. The blank between Apps is not created.
Help Guide In-Car Receiver XAV-AX4000 Updating the Software To update the software, visit the support site, then follow the online instructions. To update the software with a USB flash drive Download the software from the support site and save it in your USB flash drive. Connect your USB flash drive to the USB port, then follow the instructions on the screen of the unit.
Help Guide In-Car Receiver XAV-AX4000 Precautions Power antenna (aerial) extends automatically. When you transfer ownership or dispose of your car with the unit installed, initialize all the settings to the factory settings by performing the factory reset. Do not splash liquid onto the unit. Notes on safety Comply with your local traffic rules, laws, and regulations. While driving Do not watch or operate the unit, as it may lead to distraction and cause an accident.
Multi-touch operation is not supported on this unit. Do not touch the screen with sharp objects such as a needle, pen, or fingernail. Operation with a stylus is not supported on this unit. Do not let any objects contact the touch screen. If the screen is touched by an object other than your fingertip, the unit may not respond correctly. Since glass material is used for the screen, do not subject the unit to strong shock.
Help Guide In-Car Receiver XAV-AX4000 Supported Formats for USB Playback WMA (.wma)*1 *2 Bit rate: 32 kbps – 192 kbps (Supports variable bit rate (VBR))*3 Sampling frequency*4: 44.1 kHz Channel number : 2ch MP3 (.mp3)*1 *2 Bit rate: 32 kbps – 320 kbps (Supports variable bit rate (VBR))*3 Sampling frequency*4: 32 kHz, 44.1 kHz, 48 kHz Channel number: 2ch AAC (.m4a)*1 *2 Bit rate: 16 kbps – 320 kbps (Supports variable bit rate (VBR))*3 Sampling frequency*4: 8 kHz – 48 kHz Channel number: 2ch ALAC (.
5-035-405-11(1) Copyright 2022 Sony Corporation 65
Help Guide In-Car Receiver XAV-AX4000 About iPhone Compatible iPhone models: iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance stand
Help Guide In-Car Receiver XAV-AX4000 Notice on License This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of copyright for the software. For details on software licenses, select [Settings] [System] [Open Source Licenses].
Help Guide In-Car Receiver XAV-AX4000 Maintenance Replacing the lithium battery (CR2025) of the remote commander (XAV-AX4000(E)/XAVAX4000(E17)/XAV-AX4000(IN)) When the battery becomes weak, the range of the remote commander becomes shorter. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. A: Lithium battery (CR2025) + side up Note Keep the lithium battery out of the reach of children.
Help Guide In-Car Receiver XAV-AX4000 Specifications FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC. AUDIO POWER SPECIFICATIONS CTA2006 Standard Power Output: 20 Watts RMS × 4 Channels at 4 Ohms and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 Watt into 4 Ohms) Monitor section Display type Wide LCD color monitor Dimensions 17.6 cm/ 6.
FM Tuning range 87.5 MHz — 108.0 MHz (at 50 kHz step) 87.5 MHz — 108.0 MHz (at 100 kHz step) FM tuning step 50 kHz/100 kHz switchable Usable sensitivity 7 dBf Signal-to-noise ratio 70 dB (mono) Separation at 1 kHz 45 dB AM Tuning range 531 kHz — 1,602 kHz (at 9 kHz step) 530 kHz — 1,710 kHz (at 10 kHz step) AM tuning step 9 kHz/10 kHz switchable Sensitivity 32 μV USB player section Interface USB Type-C® (Hi-speed) Maximum current USB port: 3.
Compatible standards IEEE802.11 a/n/ac Radio frequency 5 GHz band (5.725 GHz — 5.850 GHz) Output power Max. conducted 16 dBm Frequency Tolerance 20 ppm XAV-AX4000(E17)/XAV-AX4000(IN): Compatible standards IEEE802.11 a/n/ac Radio frequency 5 GHz band (5.725 GHz — 5.850 GHz) Output power Max. conducted 10 dBm Frequency Tolerance 20 ppm XAV-AX4000(E): Compatible standards IEEE802.11 b/g/n Radio frequency 2.4 GHz band (2.401 GHz — 2.473 GHz) Output power Max.
Optional accessories/equipment Remote commander: RM-X400 (XAV-AX4000(UC)) SiriusXM Connect Vehicle Tuner: SXV100, SXV200, SXV300 (XAV-AX4000(UC)) iDataLink Maestro RR module, iDataLink Maestro RR2 module (XAV-AX4000(UC)) Ask the dealer for detailed information. Design and specifications are subject to change without notice.
Help Guide In-Car Receiver XAV-AX4000 Copyrights SiriusXM-Ready® allows you to Listen to ad-free music, plus all the sports, talk, comedy, news coverage, all in one place. (SiriusXM Connect Tuner and subscription required. Sold separately.) For more information, visit www.siriusxm.com. SiriusXM and all related marks and logos are trademarks of Sirius XM Radio, Inc. All rights reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Help Guide In-Car Receiver XAV-AX4000 Troubleshooting Do the following before you request a repair service. Read the relevant instruction and troubleshooting topics in this Help Guide. Issues may be resolved by updating the software. When you install the “Support by Sony” app on your smartphone, you can get software update information conveniently. Visit our customer support home page. If none of the above works, consult your nearest Sony dealer.
Help Guide In-Car Receiver XAV-AX4000 There is no beep sound. System sound is off in settings.
Help Guide In-Car Receiver XAV-AX4000 The fuse has blown. / The unit makes noise when the position of the ignition is switched. The power supply leads are not matched correctly with the car’s accessory power connector.
Help Guide In-Car Receiver XAV-AX4000 The display disappears from the monitor. / The display does not appear on the monitor. The monitor off function is activated. Touch anywhere on the display to turn the display back on. Press DISP OFF on the remote commander. (XAV-AX4000(E)/XAV-AX4000(E17)/XAV-AX4000(IN)) The standby function is activated. Press HOME.
Help Guide In-Car Receiver XAV-AX4000 Menu items cannot be selected. Unavailable menu items are displayed in gray.
Help Guide In-Car Receiver XAV-AX4000 The unit cannot be operated. Press and hold HOME for more than 10 seconds to restart the unit.
Help Guide In-Car Receiver XAV-AX4000 The display does not turn on. The display may not be mounted properly. Check that the installation and connection of the display are appropriately applied to the unit.
Help Guide In-Car Receiver XAV-AX4000 The touch screen does not react to your touch correctly. Touch one part of the touch screen at a time. If two or more parts are touched simultaneously, the touch screen will not react correctly. Touch the pressure sensitive screen firmly. The touch screen does not react when touching with a wet fingertip or when water droplets are on the touch screen. Dry your wet fingertips well, or fully wipe water droplets off of the touch screen.
Help Guide In-Car Receiver XAV-AX4000 Multi-touch is not recognized. Multi-touch operation is not supported on this unit.
Help Guide In-Car Receiver XAV-AX4000 A suffix such as “-2”, “-3”, ... appears after the name of the device on [Device Connection]. The name of the connected device is duplicated. Change the name of the connected device.
Help Guide In-Car Receiver XAV-AX4000 The radio reception is poor. / Static noise occurs. Connect the antenna (aerial) firmly. Connection to REM OUT may be required.
Help Guide In-Car Receiver XAV-AX4000 The stations cannot be received. (XAV-AX4000(E)/XAV-AX4000(E17)/XAV-AX4000(IN)) The tuning step setting has been erased. Set the tuning step again.
Help Guide In-Car Receiver XAV-AX4000 There is no picture or picture noise occurs. Installation is not correct. Install the unit at an angle of less than 30° in a sturdy part of the car. The parking lead (light green) is not connected to the parking brake switch lead, or the parking brake is not applied. Check that the parking lead is firmly connected to the parking brake switch lead, then apply the parking brake.
Help Guide In-Car Receiver XAV-AX4000 There is no sound, sound skips, or sound cracks. The connection between this unit and the connected equipment has not been established correctly. Check the connection between this unit and the connected equipment and set the input selector of the equipment to the source corresponding to this unit. If the problem continues, disconnect the equipment and reconnect it to this unit. Installation is not correct.
Help Guide In-Car Receiver XAV-AX4000 Sound is noisy. Keep cords and cables away from each other.
Help Guide In-Car Receiver XAV-AX4000 Items cannot be played. Reconnect the USB device. Make sure the USB device or file is supported. USB devices formatted with file systems other than FAT16, FAT32 or exFAT are unsupported.* * This unit supports FAT16, FAT32 and exFAT, but some USB device may not support all of these. For details, refer to the operating instructions of each USB device or contact the manufacturer.
Help Guide In-Car Receiver XAV-AX4000 The USB device takes longer to play. The USB device contains large-sized files, large amount of files, or files with a complicated tree structure.
Help Guide In-Car Receiver XAV-AX4000 The smartphone connected to the USB port cannot be played. The USB connection is only available for Android phones and USB devices in MSC mode. When using a smartphone other than an Android phone, make a BLUETOOTH connection.
Help Guide In-Car Receiver XAV-AX4000 The other BLUETOOTH device cannot detect this unit. Set [Bluetooth Signal] to [On]. Depending on your smartphone or mobile phone, you may need to delete this unit from the history of the connected smartphone or mobile phone, then pair them again.
Help Guide In-Car Receiver XAV-AX4000 Connection is not possible. Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again.
Help Guide In-Car Receiver XAV-AX4000 The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name.
Help Guide In-Car Receiver XAV-AX4000 There is no ringtone. Raise the volume while receiving a call. To adjust the ringtone volume, press HOME, touch [Settings], and select [Ring Tone] of [Volume Settings] in [System]. The speakers are not connected to the unit. Connect the speakers to the unit. To select the speakers for ringtone, press HOME, then touch [Settings] and select [Optional Audio Output Channel] in [System].
Help Guide In-Car Receiver XAV-AX4000 The talker’s voice volume is low. Raise the volume during a call. To adjust the talker's voice volume, press HOME, touch [Settings], and select [Phone Call] of [Volume Settings] in [System].
Help Guide In-Car Receiver XAV-AX4000 The other party says that the volume is too low or high. Adjust the [MIC Gain] level.
Help Guide In-Car Receiver XAV-AX4000 Echo or noise occurs during call conversations. Reduce the volume. If ambient noise other than the phone call sound is loud, try reducing this noise. Shut the window if road noise is loud. Lower the air conditioner if the air conditioner is loud.
Help Guide In-Car Receiver XAV-AX4000 The phone sound quality is poor. Phone sound quality depends on reception conditions of the mobile phone. Move your car to a place where you can enhance the mobile phone’s signal if the reception is poor.
Help Guide In-Car Receiver XAV-AX4000 The volume of the connected BLUETOOTH device or apps is low or high. Volume level will differ depending on the BLUETOOTH device or apps. Reduce the volume level differences between this unit and the BLUETOOTH device or apps.
Help Guide In-Car Receiver XAV-AX4000 The sound skips during audio streaming or the BLUETOOTH connection fails. Reduce the distance between the unit and the BLUETOOTH device. If the BLUETOOTH device is stored in a case which interrupts the signal, remove the case while using the device. Several BLUETOOTH devices or other devices (e.g. ham radio devices) which emit radio waves are used nearby. Turn off the other devices. Increase the distance between the unit and other devices.
Help Guide In-Car Receiver XAV-AX4000 The connected BLUETOOTH device cannot be controlled during audio streaming. Check that the connected BLUETOOTH device supports AVRCP.
Help Guide In-Car Receiver XAV-AX4000 Some functions do not work. Check that the connecting device supports the functions in question. Visit the support site, then check the compatibility list.
Help Guide In-Car Receiver XAV-AX4000 A call is answered unintentionally. The connecting phone is set to start a call automatically. [Auto Answer] of this unit is set to [On].
Help Guide In-Car Receiver XAV-AX4000 Pairing failed due to time out. Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time.
Help Guide In-Car Receiver XAV-AX4000 Cannot pair. The unit may not be able to pair with a previously paired BLUETOOTH device after initializing the unit if the pairing information of the unit is on the BLUETOOTH device. In this case, delete the pairing information of the unit from the BLUETOOTH device, and then pair them again.
Help Guide In-Car Receiver XAV-AX4000 The BLUETOOTH function cannot be operated. Turn the ignition off. Wait for a while, then turn the ignition to the ACC position.
Help Guide In-Car Receiver XAV-AX4000 No sound is output from the car speakers during a handsfree call. If the sound is output from the mobile phone, set the mobile phone to output the sound from the car speakers. Check the volume level of the car speakers.
Help Guide In-Car Receiver XAV-AX4000 A mature channel is not blocked although parental control setting has been made. If you tune to a mature channel, the passcode display will appear. Once you have entered the passcode, you will have unblocked parental control for all channels until the unit is powered down or you turn parental control back on. Set [Parental Control] to [Locked] in the SXM option ( ) again.
Help Guide In-Car Receiver XAV-AX4000 The Apple CarPlay icon does not appear on the HOME screen. Your iPhone is not compatible with Apple CarPlay. Refer to the manual supplied with your iPhone, or visit the Apple CarPlay website. Disconnect your iPhone and reconnect it again. Check that the Wi-Fi setting of your iPhone is [ON]. Check that the GPS antenna (aerial) (supplied) is connected. Check that your iPhone is connected with [Device Connection] of [Settings].
Help Guide In-Car Receiver XAV-AX4000 The position accuracy is not good when using maps with Apple CarPlay. Check the location where the GPS antenna (aerial) is installed. Some types of front windshields (windscreens) block GPS satellite radio waves. In that case, install the GPS antenna (aerial) near the window. Do not paint the GPS antenna (aerial). It may affect the accuracy. The correction status of the internal sensor may be insufficient.
Help Guide In-Car Receiver XAV-AX4000 The Android Auto icon does not appear on the HOME screen. Check your Android phone and complete the initial set up process on your Android phone. There is no Android Auto application installed on your Android phone. Download and install the Android Auto application or update to the latest version of the application onto your Android phone. Your Android phone is not compatible with Android Auto. Your Android phone needs to support Android Auto.
Help Guide In-Car Receiver XAV-AX4000 The position accuracy is not good when using maps with Android Auto. Check the location where the GPS antenna (aerial) is installed. Some types of front windshields (windscreens) block GPS satellite radio waves. In that case, install the GPS antenna (aerial) near the window. Do not paint the GPS antenna (aerial). It may affect the accuracy. The correction status of the internal sensor may be insufficient.
Help Guide In-Car Receiver XAV-AX4000 iDataLink Maestro If you have any inquiries about the functions, settings and connections of iDataLink Maestro, visit the website: https://www.idatalinkmaestro.com/ or contact: Automotive Data Solutions Inc. Email: maestrosupport@adsdata.
Help Guide In-Car Receiver XAV-AX4000 General Cannot play selected content The currently selected content cannot be played back, or skipped to the next one. The content is not in a supported file format. Check supported file formats. The device is not responding The unit does not recognize the connected USB device. Reconnect the USB device. Check that the USB device is supported by the unit. No playable content The USB device has no playable data. Load the supported data/files into the USB device.
Help Guide In-Car Receiver XAV-AX4000 SiriusXM Connect Vehicle Tuner (XAV-AX4000(UC)) Channel Locked. Please Enter the Lock Code. The channel that you have requested is Locked by the radio Parental Control feature. See “Setting a Parental Control” for more information on the Parental Control feature and how to access locked channels. Channel Not Available The channel that you have requested is not a valid SiriusXM channel or the channel that you were listening to is no longer available.
Verify that your vehicle is outdoors with a clear view of the sky. Verify that the SiriusXM magnetic mount antenna (aerial) is mounted on a metal surface on the outside of the vehicle. Move the SiriusXM antenna (aerial) away from any obstructions. Inspect the antenna (aerial) cable for damage and kinks. Consult the SiriusXM Connect Vehicle Tuner installation manual for more information on antenna (aerial) installation. Replace the antenna (aerial) if the cable is damaged.
Help Guide In-Car Receiver XAV-AX4000 Customer Support Websites You can access the following customer support websites to get support information about your system. For customers in the USA/Canada/Latin America: https://www.sony.com/am/support For customers in European countries: https://www.sony.eu/support For customers in other countries/regions: https://www.sony-asia.com/support For customers in the USA If you have any questions/problems regarding this product, try the following: 1.
Help Guide In-Car Receiver XAV-AX4000 About the “Support by Sony” App When you install the “Support by Sony” app on your smartphone, you can get software update information conveniently. “Support by Sony” app - Find information and get notifications about your product: News & Alerts Software updates Tutorials Tips & Tricks https://sony.net/SBS Visit the “Support by Sony” website at sony.net/SBS, and bookmark the model name of the unit, “XAV-AX4000”, when you visit the website.
4-597-059-12 LIMITED WARRANTY Car Audio U.S. and U.S. Canada and Canada only only – XXXXXXXXXXX – 1 year Sony Electronics Inc. solely for purchases made in the United States and Sony of Canada Ltd. solely for purchases made in Canada (collectively “Sony”) warrants this product against defects in material or workmanship for the original owner and any subsequent end user owner(s) (“You” or “Your”) for the time period set forth above as set forth herein.
GARANTIE LIMITÉE É.-U.etetCanada Canadauniquement uniquement– –XXXXX 1 an É.-U. Sony Electronics Inc. exclusivement pour les achats effectués aux États-Unis et Sony du Canada Ltée. exclusivement pour les achats effectués au Canada (collectivement « Sony ») garantit ce produit contre les défauts de matériaux ou de fabrication pour le propriétaire d’origine et tous les propriétaires utilisateurs finaux suivants (« Vous » ou « Vos ») pendant la période définie cidessus et comme indiqué dans les présentes.