4-732-062-13(1) AV RECEIVER Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. XAV-AX5000 Serial No. To cancel the demonstration (Demo) display, see page 16. For the connection/installation, see page 27. Pour annuler l’affichage de démonstration (Démo), reportezvous à la page 18.
For safety, be sure to install this unit in the dashboard of the car as the rear side of the unit becomes hot during use. For details, see “Connection/Installation” (page 27). The nameplate indicating operating voltage, etc., is located on the bottom of the chassis. The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area). Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Warning if your car’s ignition has no ACC position Do not install this unit in a car that has no ACC position. The display of the unit does not turn off even after turning the ignition off, and this causes battery drain. Disclaimer regarding services offered by third parties Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.
Connection/Installation Table of Contents Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . 5 Getting Started Performing Initial Settings . . . . . . . . . . . . . . . . . . . . 8 Preparing a BLUETOOTH Device. . . . . . . . . . . . . . . . 8 Connecting Rear View Camera . . . . . . . . . . . . . . . . 9 Listening to the Radio Listening to the Radio. . . . . . . . . . . . . . . . . . . . . . . .
Guide to Parts and Controls Main unit The VOL (volume) + button has a tactile dot. Display/touch panel HOME Open the HOME menu. ATT (attenuate) Press and hold for 1 second to attenuate the sound. To cancel, press and hold again, or press VOL +. / (previous/next) – Move to the previous/next item. – Press and hold to fast-reverse/fast-forward. OPTION Press to open the OPTION screen (page 7). VOICE Press and hold to activate the voice command function for Apple CarPlay and Android Auto.
RM-X170 remote commander The remote commander can be used to operate the audio controls. For menu operations, use the touch panel. /// Functions differ depending on the selected source. – Tuner: select a preset station or tune into a station automatically. – SiriusXM: select a preset channel or move to the previous/next channel. – USB: select a folder or move to the previous/ next file. ENTER Enter the selected item. SRC (source) Change the source.
Screen displays Status indication Lights up when the sound is attenuated. Playback screen: Indicates the signal strength status of the connected SiriusXM Connect Vehicle Tuner. Lights up when the audio device is playable by enabling the A2DP (Advanced Audio Distribution Profile). Lights up when handsfree calling is available by enabling the HFP (Handsfree Profile). Indicates the signal strength status of the connected cellular phone.
Getting Started Performing Initial Settings You need to perform initial settings before operating the unit for the first time, after replacing the car battery, or changing connections. If the initial settings screen does not appear when you turn on the unit, perform the factory reset (page 17) to initialize the unit. 1 Place the BLUETOOTH device within 1 m (3 ft) of this unit. 2 3 4 Press HOME, then touch [Settings]. Touch [Bluetooth]. Touch [Bluetooth Connection], then set the signal to [ON].
Connecting with a paired BLUETOOTH device To use a paired device, connection with this unit is required. Some paired devices will connect automatically. Listening to the Radio Listening to the Radio To listen to the radio, press HOME then touch [Tuner]. Reception controls/indications 1 2 3 Press HOME, then touch [Settings]. Touch [Bluetooth]. Touch [Bluetooth Connection], then touch [ON]. Make sure that the unit.
Storing manually 1 While receiving the station that you want to store, touch and hold the desired preset number. Receiving stored stations 1 Select the band, then touch the desired preset number. Using Tuner Option Functions The following functions are available by touching . BTM (Best Tuning Memory) Stores stations in order of frequency on the preset numbers. 18 stations can be stored for FM and 12 stations for AM as preset stations.
Tuning channels for SiriusXM Reception controls/indications To store channels 1 While receiving the channel that you want to store, touch and hold a number key (1 to 6). To receive the stored channel, touch a number key (1 to 6). To set a parental control The parental control feature allows you to limit access to SiriusXM channels with mature content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked channels.
Supported features USB1 USB2 MPEG-4 – Playable video format WMV – MKV – Xvid – USB connection mode MSC MTP – Playback Playing a USB Device MSC (Mass Storage Class) type USB devices*1 compliant with the USB standard can be used. MTP (Media Transfer Protocol) type USB devices*1*2 can be used only when connected to the USB2 port. *1 e.g., a USB flash drive, digital media player, Android™ phone *2 Some digital media players or Android phones may require setting to MTP mode.
Searching and Playing Tracks Further settings are available in each source by touching . The available items differ depending on the source. Repeat play and shuffle play 1 During playback, touch (repeat) or (shuffle) repeatedly until the desired play mode appears. Playback in the selected play mode may take time to start. Available play modes differ depending on the selected sound source and connected device. Searching for a file from the list screen 1 During USB playback, touch .
Handsfree Calling To use a cellular phone, connect it with this unit. For details, see “Preparing a BLUETOOTH Device” (page 8). (phonebook)* Select a contact from the name list/number list in the phonebook. To search for the desired contact in alphabetical order from the name list, touch . (phone number input) Enter the phone number. Preset phone number list Select the stored contact. To store the contact, see “Presetting phone numbers” (page 14).
Available Operations During a Call To adjust the ringtone volume Press VOL +/– while receiving a call. To adjust the talker’s voice volume Press VOL +/– during a call. To adjust the volume for the other party (Mic gain adjustment) During a handsfree call, touch , then set [MIC Gain] to [High], [Middle], or [Low]. To reduce echo and noise (Echo/noise canceler mode) During a call, touch , then set [Speech Quality] to [Mode 1] or [Mode 2].
• Since the GPS on your Android phone is used, place your Android phone where it can easily receive a GPS signal. • Android Auto may not be available in your country or region. 1 Connect your Android phone to the USB1 port. To connect an Android phone, use an appropriate connection cable (not supplied). 2 Press HOME, then touch the Android Auto icon. The Android Auto interface will be displayed fullscreen on the display of the unit. Touch and control the applications.
Steering Control Selects the input mode for the connected remote control. To prevent a malfunction, be sure to match the input mode with the connected remote control before use. Custom Input mode for the steering wheel remote control (follow the procedures of [ ] to register functions on the connected remote control). Preset Input mode for the wired remote control excluding the steering wheel remote control. The steering button panel appears.
Visual Settings (Visual) Wallpaper Changes the wallpaper by touching the desired color. Dimmer Dims the display: [OFF], [Auto], [ON]. ([Auto] is available only when the illumination control lead is connected and works when the head light is turned on.) [ ] adjusts the brightness level when the dimmer is activated: –5 to +5. BLUETOOTH Settings (Bluetooth) Bluetooth Connection Activates the BLUETOOTH signal: [OFF], [ON], [Pairing] (enters into pairing standby mode).
Notes on LCD panel • Do not get the LCD panel wet or expose it to liquids. This may cause a malfunction. • Do not press down hard on the LCD panel as doing so can distort the picture or cause a malfunction (i.e., the picture may become unclear or the LCD panel may be damaged). • Do not touch the panel with objects other than with your finger as it may damage or break the LCD panel. • Clean the LCD panel with a dry soft cloth.
*1 Copyright-protected files and multi-channel audio files cannot be played back. *2 DRM (Digital Rights Management) files cannot be played back. *3 Non-standard bit rates or non-guaranteed bit rates are included depending on the sampling frequency. *4 Sampling frequency may not correspond to all encoders. *5 These numbers indicate the maximum resolution of playable video and do not indicate the player’s display resolution. The display resolution is 800 × 480.
Specifications FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC. AUDIO POWER SPECIFICATIONS CTA2006 Standard Power Output: 20 Watts RMS × 4 at 4 Ohms < 1% THD+N SN Ratio: 80 dBA (reference: 1 Watt into 4 Ohms) Monitor section Display type: Wide LCD color monitor Dimensions: 6.
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. Apple, iPhone, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.
Multi-touch is not recognized. Multi-touch operation is not supported on this unit. Radio reception The radio reception is poor. Static noise occurs. Connect the antenna (aerial) firmly. RDS PTY displays [PTY not found.]. The current station is not an RDS station, or the radio reception is poor. Picture There is no picture/picture noise occurs. A connection has not been made correctly.
There is no ringtone. Raise the volume while receiving a call. The talker’s voice volume is low. Raise the volume during a call. The other party says that the volume is too low or high. Adjust the [MIC Gain] level (page 15). Echo or noise occurs during call conversations. Reduce the volume. Set [Speech Quality] to [Mode 1] or [Mode 2]. (page 15). If ambient noise other than the phone call sound is loud, try reducing this noise. – Shut the window if road noise is loud.
Android Auto The Android Auto icon does not appear on the HOME screen. Check your Android phone and accept the disclaimers and permission requests required to use Android Auto on your Android phone. There is no Android Auto application installed on your Android phone. – Download and install the Android Auto application onto your Android phone. Your Android phone is not compatible with Android Auto. – Android phone with Android 5.0 or higher is required.
Check Antenna The radio has detected a fault with the SiriusXM antenna (aerial). The antenna (aerial) cable may be either disconnected or damaged. – Verify that the antenna (aerial) cable is connected to the SiriusXM Connect Vehicle Tuner. – Inspect the antenna (aerial) cable for damage and kinks. – Replace the antenna (aerial) if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com Check SXM tuner.
Connection/Installation Parts List for Installation Cautions • Do not install this unit in a car that has no ACC position. The display of the unit does not turn off even after turning the ignition off, and this causes battery drain. • Run all ground (earth) leads to a common ground (earth) point. • Do not get the leads trapped under a screw or caught in moving parts (e.g., seat railing). • Before making connections, turn the car ignition off to avoid short circuits.
Connection Subwoofer*1 *3 *3 *3 Power amplifier*1 USB device (for audio playback only)*8 *3 Rear view camera*1 *6*7 from a wired remote control (not supplied)*4 Satellite radio tuner (SiriusXM)*1*9 Smartphone, USB device (for audio/video playback)*8 White White/black striped Gray Front speaker*1*2 Gray/black striped Green Green/black striped Purple Rear speaker*1*2 Purple/black striped Black Yellow Red Blue/white striped For details, see “Making connections” (page 29).
*1 *2 *3 *4 *5 *6 *7 *8 *9 Not supplied Speaker impedance: 4 Ω – 8 Ω × 4 RCA pin cord (not supplied) Depending on the type of car, use an adaptor for a wired remote control (not supplied). For details on using the wired remote control, see “Using the wired remote control” (page 30). Depending on the type of car, use an adaptor (not supplied) if the antenna (aerial) connector does not fit. Whether in use or not, route the microphone input cord so it does not interfere with driving operations.
Cautions • It is extremely dangerous if the cord becomes wound around the steering column or gearstick. Be sure to keep it and other parts from interfering with your driving operations. • If airbags or any other shock-absorbing equipment are in your car, contact the store where you purchased this unit or the car dealer before installation. Note Installation Mounting the unit in a Japanese car You may not be able to install this unit in some Japanese cars. In such a case, consult your Sony dealer.
Support site Site d’assistance If you have any questions or for the latest support information on this product, please visit the web site below: Si vous avez des questions ou si vous souhaitez consulter les toutes dernières informations techniques sur ce produit, rendez-vous sur le site Web suivant : Sitio Web de soporte técnico en línea Para resolver cualquier duda u obtener la información más reciente sobre el soporte técnico de este producto, visite el siguiente sitio Web: http://esupport.sony.
XAV-AX5000 7” Media Receiver with Bluetooth® 7” touchscreen media receiver with voice-controlled Apple CarPlay1 and Android Auto2. Bluetooth3 and dual USB connections provide various ways to connect hands free.
Sound waves are directional, especially in the higher frequencies – so if your speakers are positioned low in your doors, high frequency sounds are often lost, reducing clarity and instrument separation. Dynamic Stage Organizer uses digital signal processing to lift the sound, improving stereo positioning so music sounds like it’s coming from right in front of you. FLAC compatible FLAC compatibility lets you play lossless audio files, so you can enjoy every detail of the music.
Feature & Device / Expandability Shuffle Control (Audio Device side) Yes TRACK +/- Yes Bluetooth Feature & Device / BT Spec. Version Version 3.
Repeat Initial All Accessibility Closed Caption / TTS: No support Shuffle Yes ANT connector JASO USB Feature & Device / USB Capability C/O Yes connectionenabled device list Connector type 16P WEB Support 55W File System USB1: exFAT, FAT12/16/32, USB2: FAT12/16/32 Maximum output power (4ohms, 1kHz, 16V)(W) USB Mass Storage Device Yes USB Media Transfer Protocol USB1: No, USB2: Yes USB Mass Strage Device Control Feature POP Yes (CPAA) Power Connector Yes Speaker impedance (ohms) 4
4-597-059-11 LIMITED WARRANTY Car Audio U.S. and Canada only- 1 year Sony Electronics Inc. solely for purchases made in the United States and Sony of Canada Ltd. solely for purchases made in Canada (collectively "Sony'') warrants this product against defects in material or workmanship for the original owner and any subsequent end user owner(s) ("You" or ''Your") for the time period set forth above as set forth herein.
