Installation Guide - Wall-Mount Bracket

6 (GB)
2
Remove the screws from the
rear of the TV.
XBR-75X900E/XBR-65X900E/XBR-55X900E/
XBR-49X900E/XBR-65X850E/KD-75X9000E/
KD-65X9000E/KD-55X9000E/KD-49X9000E/
KD-65X8500E/KD-55X8500E
XBR-75X850E/KD-75X8500E
3
Referring to the Screw and Hook
locations diagram/table on
page 20, determine the screw
positions, and secure the
Mounting Hook to the rear of the
TV.
 Secure the Mounting Hook to the rear of the
TV temporarily, using the four screws
(*1, *2)
.
 Be sure that both screws are securely
tightened with equal torque strength to the
rear of the TV.
*1
Needs 5 spacers (not supplied) and screws
PSW M6 × 25 mm (not supplied):
XBR-75X900E/XBR-75X850E/XBR-65X850E/
KD-75X9000E/KD-75X8500E/KD-65X8500E/
KD-55X8500E
*2
No spacers necessary, but screws of PSW 6 ×
16 mm are necessary (supplied):
XBR-65X900E/XBR-55X900E/XBR-49X900E/
XBR-55X800E/XBR-49X800E/KD-65X9000E/
KD-55X9000E/KD-49X9000E/KD-49X8000E
Mounting Hook
Screw
*1, *2
Spacer
*1, *2
10 mm (13/32 inch)