Help Guide (Web manual)

> Using the TV with Other Devices

> Set-top box (cable/satellite box) with an IR Blaster (IR Blaster compatible models only)

> Setting up the IR Blaster to control the set-top box (cable/satellite box) (IR Blaster compatible models only)

Setting up the IR Blaster to control the set-top box

(cable/satellite box) (IR Blaster compatible models only)

Peforming [Set-top box control setup] in [IR Blaster setup] allows you to operate a cable/satellite box from the menu

displayed by pressing the ACTION MENU button on the remote control.

Press the HOME button, then select [Settings] — [External inputs] — [IR Blaster setup] —

[Set-top box control setup].

Follow the on-screen instructions.

Hint

The IR Blaster can operate an AV receiver. To set up an AV receiver, press the HOME button, then select [Settings]

— [External inputs] — [IR Blaster setup] — [AV receiver control setup].

If the AV receiver is a BRAVIA Sync-compatible device, an IR Blaster is not needed.

Note

Some external devices may not respond to some items in the “Action Menu”.

If you press and hold a button on the remote control, the operation may not be transmitted. Instead, press the button

repeatedly.