Owner's Manual
Table Of Contents
- Reference Guide
- Table of Contents
- Introduction
- Location of the identification label
- Safety Information
- Precautions
- Protecting the TV Screen (OLED TV)
- Parts and Controls
- Using Remote Control
- Connection Diagram
- Using Sound Bar (not supplied)
- Installing the TV to the Wall
- Installing the TV against a wall or enclosed area
- Troubleshooting
- Specifications
- Setup Guide
- TV Mounting Made Simple
- Safety and Regulatory Booklet
- End User License Agreement
- Warranty
- Child Safety
12
US
REMOTE RS-232C
REMOTE IR IN
• These jacks are for receiving the
external control signal. Enables
extended control of the TV using RS-
232C via the RS-232C and IR IN jacks.
RS-232C: connect to the RS-232C
t
erminal
of the home controller.
IR IN: connect to the IR out terminal
of the ho
me controller.
• Take care to not connect to
he
ad
p
h
o
n
es or an external audio
system.
/ VIDEO IN
• For a composite connection, use an
Analog Extension Cable (not
supplied).
•
AUDIO OUT /
• Supports 3-pole stereo mini jack only.
• To listen to the TV's sound through
the connec
ted equipment, press
HOME. Select [Settings] [Sound]
[Headphone/Audio out] and then
select the desired item.
IR BLASTER
• Use your Sony remote control to
control your Set Top Box (cable/
satellite box). Connect the IR Blaster
Cable (supplied) to the IR Blaster port
on your TV. Place one or both of the
other two ends as shown below.
• To perform IR Blaster setup, press
HO
ME and se
lect [Settings]
[External inputs] [IR Blaster setup].
USB 1/2, USB 3
• Connecting a large USB device may
interfere with other connected
devices beside it.
• When connecting a large USB device,
c
onnect to
the USB 1 port.
HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
•
• HDM
I IN 2/3
To enjoy high quality 4K 60p
contents, c
onnect a Premium High
Speed HDMI cable to the HDMI IN 2/3
and set the [HDMI signal format] to
[Enhanced format].
For details of supported formats, refer
to
the “Speci
fications“ in this manual
(page 21-22).
• H
DMI IN 3 ARC (Audio Return
Channel
)
Connect your audio system to the
HDMI IN 3 to route TV audio to your
au
dio syst
em. An audio system that
supports HDMI ARC can send video to
the TV, and receive audio from the TV
via the same HDMI cable. If your
audio system does not support HDMI
ARC, an additional connection with
DIGITAL AUDIO OUT (OPTICAL) is
necessary.
3.5 mm
1234
1: L
2: Video
3: Ground
4: R
< 12 mm
< 21 mm
I'
=
'.•
'I
= =
~