Owner's Manual

10GB
Specifications
AUDIO POWER SPECIFICATIONS
CTA2006 Standard
Power Output: 70 Watts RMS × 4 at 
4 Ohms < 1% THD+N
SN Ratio: 93 dBA 
(reference: 1 Watt into 4 Ohms)
Circuit system
OTL (output transformerless) circuit,
Pulse power supply
Inputs
RCA pin jacks,
High level input connector
Input level adjustment range
0.3 – 6 V (RCA pin jacks),
3 – 12 V (High level input)
Outputs
Speaker terminals
Speaker impedance
2 – 8 Ω (stereo),
4 – 8 Ω (when used as a bridging amplifier)
Maximum output
2 Speakers: 350 W × 2 (at 4 Ω)
4 Speakers: 150 W × 4 (at 4 Ω)
Rated output 
(supply voltage at 14.4 V, 20 Hz – 20 kHz, 1 %
TH
D)
2 Speaker
s: 160 W × 2 (at 4 Ω)
4 Speakers: 80 W × 4 (at 2 Ω),
70 W × 4 (at 4 Ω)
Frequency response
10 Hz – 100 kHz ( dB)
Harmonic distortion
0.05 % or less (at 1 kHz, 4 Ω)
Low-pass filter
50 – 300 Hz, 12 dB/oct
High-pass filter
50 – 300 Hz, 12 dB/oct
Subsonic filter
6 – 70 Hz, 12 dB/oct
Low boost
0 – 10 dB (40 Hz)
Power requirements
12 V DC car battery (negative ground (earth))
Power supply voltage
10.5 – 16 V
Current drain
At rated output: 33 A (4 Ω, 70 W × 4)
Remote input: 1 mA
Dimensions
Approx. 272 × 51 × 202 mm (10
3
/4 × 2
1
/8 × 8 in)
(w/h/d) not incl. projecting parts and controls
 272 mm (10
3
/4 in)
 162 mm (6
1
/2 in)
 251 mm (10 in)
 149.5 mm (6 in)
 202 mm (8 in)
 51 mm (2
1
/8 in)
Mass
Approx. 2.7 kg (6 lb) not incl. accessories
Package contents:
Main unit (1)
Mounting screws (4)
High level input cord (1)
Your dealer may not handle some of the above
l
isted acc
essories. Please ask the dealer for detailed
information.
Design and specifications are subject to change
without no
tice.
+0.5
−
3.0