User Guide

Wi-Fi® settings
When you are connected to a Wi-Fi® network or when there are Wi-Fi® networks
available in your vicinity, it is possible to view the status of these networks. You can also
enable your device to notify you whenever an open Wi-Fi® network is detected.
If you are not connected to a Wi-Fi® network, your device uses a cellular data
connection to access the Internet (if you have set up and enabled a cellular data
connection on your device). By adding a Wi-Fi® sleep policy, you can specify when to
switch from Wi-Fi® to cellular data.
To enable Wi-Fi® network notifications
1 Turn on Wi-Fi®, if it is not already on.
2 From your Homescreen, tap
.
3 Find and tap Settings > Wi-Fi.
4 Press
.
5 Tap Advanced.
6 Mark the Network notification checkbox.
To view detailed information about a connected Wi-Fi® network
1 From the Homescreen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Tap the Wi-Fi® network that you are currently connected to. Detailed network
information is displayed.
To add a Wi-Fi® sleep policy
1 From the Homescreen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Press
.
4 Tap Advanced.
5 Tap Keep Wi-Fi on during sleep.
6 Select an option.
WPS
WPS (Wi-Fi® Protected Setup) is a computing standard that helps you establish secure
wireless network connections. If you have little background knowledge of wireless
security, WPS makes it easy for you to set up Wi-Fi Protected Access (WPA) encryption
to secure your network. You can also add new devices to an existing network without
entering long passwords.
Use one of these methods to enable WPS:
• Push button method – simply push a button on a WPS-supported device, for example, a
router.
• PIN method – your device creates a random PIN (Personal Identification Number), which
you enter on the WPS-supported device.
29
This is an Internet version of this publication. © Print only for private use.