User Guide

Table Of Contents
To connect to a Wi-Fi® network using a WPS button
1 From your Homescreen, tap .
2 Find and tap Settings > Wi-Fi.
3 Turn on Wi-Fi® if it is not already on.
4 Tap , then press the WPS button on the WPS-supported device.
To connect to a Wi-Fi® network using a WPS PIN
1 From your Homescreen, tap .
2 Find and tap Settings > Wi-Fi.
3 Turn on Wi-Fi® if it is not already on.
4 Tap > WPS PIN Entry.
5 On the WPS-supported device, enter the PIN that appears on your device.
Sharing your mobile data connection
You can share your mobile data connection with other devices in several ways:
USB tethering
– share your mobile data connection with a single computer using a USB cable.
Bluetooth® tethering
– share your mobile data connection with up to five other devices via Bluetooth®.
Portable Wi-Fi® hotspot
– share your mobile data connection simultaneously with up to 10 other devices,
including devices that support WPS technology.
To share your data connection using a USB cable
1 Deactivate all USB cable connections to your device.
2 Using the USB cable that came with your device, connect your device to a
computer.
3 From your Homescreen, tap
.
4 Find and tap Settings > More… > Tethering & portable hotspot.
5 Mark the USB tethering checkbox, then tap OK if prompted. is displayed in the
status bar once you are connected.
6 To stop sharing your data connection, unmark the USB tethering checkbox or
disconnect the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
To share your mobile data connection with another Bluetooth® device
1 Make sure that your device and the Bluetooth® device are paired with each other.
2 Your device: Turn on mobile data, then mark the Bluetooth tethering checkbox
under Settings > More… > Tethering & portable hotspot.
3 Bluetooth® device: Set up the device so that it obtains its network connection
using Bluetooth®. If the device is a computer, refer to the relevant instructions to
complete the setup. If the device runs on the Android™ operating system, tap the
settings icon beside the name of the device that it is paired with under Settings >
Bluetooth > Paired devices, then mark the Internet access checkbox.
4 Your device: Wait for
to appear in the status bar. Once it appears, the setup is
complete.
5 To stop sharing your mobile data connection, unmark the Bluetooth tethering
checkbox.
The
Bluetooth tethering checkbox becomes unmarked every time you turn off your device or
turn off the Bluetooth® function.
For more information about pairing and turning on mobile data, see
To pair your device with
another Bluetooth® device
on page 103 and
To turn data traffic on or off
on page 31.
30
This is an Internet version of this publication. © Print only for private use.