Operation Manual

To set the no
tication level for an app
1 Find and tap Settings > Apps & notications.
2 Select the desired app, then tap Notications.
3 Tap the switches to adjust notication settings as desired.
Notication light
The notication light informs you about battery status and some other events. For
example, a ashing white light means there is a new message or a missed call. The
notication light is enabled by default but can be disabled manually.
Note
When the no
tication light is disabled, it only lights up when there is a battery status
warning, for example, when the battery level goes below 15 percent.
To enable or disable the notication light
1 Find and tap Settings > Apps & notications > Congure notications.
2 Tap Use LED light to show incoming notications switch to enable or disable the
function.
Icons in the status bar
Status icons
Signal strength
No signal
Roaming
Sending and downloading LTE data
Sending and downloading GPRS data
Sending and downloading EDGE data
Sending and downloading 3G data
Sending and downloading HSPA+ data
A Wi-Fi connection is enabled and data is being transmitted
A Wi-Fi connection is enabled but there is no internet connection.
T
his icon also appears when you are trying to connect to a secured Wi-Fi or captive portal
network. After a successful login, the cross mark disappears.
If Google is blocked in your area, the cross mark may appear even when the device is
connected to a network and there is a Wi-Fi working internet connection.
Battery status
The battery is charging
Airplane mode is activated
The Bluetooth function is activated
The microphone is muted
The speakerphone is on
Do not disturb mode is activated
Mute mode
Vibrate mode
An alarm is set
36
Int
ernet version. For personal use only.