Operation Manual

1. Front camera lens
2. Headset jack
3. Ear speaker/Second loudspeaker
4. Second microphone
5. Proximity/Light sensor
6. Charging/Notification light
7. Power key/Fingerprint sensor*
8. Volume/Zoom key
9. Camera key
10. Main microphone
11. Charger/USB cable port
12. Main loudspeaker
13. Wi-Fi/Bluetooth antenna area
14. Main camera lens
15. Main camera light
16. GPS antenna area
17. NFC™ detection area
18. Nano SIM/Memory card slot cover
19. Strap hole
Before using the Fingerprint sensor, make sure the sensor is clean and without any visible
moisture.
Assembly
Your device only supports nano SIM cards.
To insert the nano SIM card
Your device only supports nano SIM cards. Make sure you use the nano SIM card holder and
don’t confuse the nano SIM card slot with the memory card slot.
1
Open the cover for the nano SIM and memory card slots.
2
Using a fingernail or other similar object, drag out the nano SIM card holder.
3
Place the nano SIM card in the holder, then re-insert the holder.
4
Close the cover.
If you insert a nano SIM card while the device is powered on, the device restarts automatically.
To insert a memory card
1
Open the cover for the nano SIM card and memory card slots.
2
Place the memory card in the memory card slot, then push the memory card all
the way into the slot until you hear a clicking sound.
3
Close the cover.
Make sure you insert the memory card in the correct orientation.
To remove the nano SIM card
8
This is an Internet version of this publication. © Print only for private use.