Owner's Manual

Press the (Quick Settings) button on the remote control, then select [Settings] —
[Display & Sound] — [Audio output] — [Speakers] — [Audio system].
If the audio system is not compatible with Dolby Digital or DTS, set [Settings] —
[Display & Sound] — [Audio output] — [Digital audio out] to [PCM].
Check if the [Digital audio out volume] setting of the TV is at maximum.
Press the (Quick Settings) button on the remote control, then select:
[Settings] — [Display & Sound] — [Audio output] — [Digital audio out volume]
When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT
(OPTICAL) may not provide an audio signal.
Related topics
Audio noise.
Connecting an audio system
[127] Sound | Sound
Distorted sound.
Check the antenna/cable connection.
Keep the antenna/cable away from other connecting cables.
Keep the TV away from electrical noise sources such as cars, hair-dryers, Wi-Fi units,
mobile phones, or optical devices.
When installing an optional device, leave some space between the device and TV.
Set [Audio filter] to [Low] or [High] to improve sound for analog reception. ([Audio filter]
may not be available depending on your region/country.)
Related topics
Audio noise.
[128] Sound | Sound
You want to output sound from the
headphones/Bluetooth audio device and audio