Marketing Specifications

Experience lifelike sound quality with the GS series speakers by Sony®.
The composite MRC woofers and so dome tweeters run through the
integrated 2-way crossovers and deliver studio quality performance.
• Two-way speaker system
• 1” So dome tweeter
• 6x9” MRC ber woofer
• High energy magnets
• 2-way crossover network
• Bi-amp design input
• 100 Watts rated (120 Watts RMS CEA 2031) 400 Watts peak
Audio
Frequency
Response
25 - 30,000 Hz
Sensitivity (db) 89 +/- 2 dB/1W/1m
General
Magnet
Woofer: Ferrite
Tweeter: Neodymium
Material
Woofer: Mica Reinforced Cellular Fiber
Tweeter: Synthetic Fabric
Power
Power Handling
Capacity
120 Watts RMS (CEA 2031)
Power Maximum
Capacity
400 Watts
Rated Power 100 Watts
Audio
Impedance 4 Ohms
Weights and Measurements
Diameter
(Approx.)
Woofer: 6 x 9"
Tweeter: 1 15/16"
Two-way design
The Sony® GS series speakers deliver incredible frequency response with outstanding dispersion and beautifully clear highs
thanks to the MRC woofer, so dome tweeter and integrated 2-way crossover.
So dome tweeter
The GS series speakers feature a synthetic fabric, so dome tweeter to deliver incredible high-frequency response.
6 x 9" MRC woofer
The GS series woofers use Mica Reinforced Cellular (MRC) bers for supremely light and extraordinarily rigid woofer cones.
MRC woofer cones produce exceptional musical transients with little distortion compared to traditional cone materials.
High energy magnets
The GS series speakers use high energy magnets to control cone travel and power handling. The midrange woofer uses
powerful Ferrite magnet while the so dome tweeter uses rare earth, compact Neodymium magnets.
Integrated crossover
GS series speakers use precision crossovers to match the frequency response capabilities of the drivers. The 2-way, 3000
Hz crossover feature a 12 db/oct high-pass lter (HPF) and 6 dB/oct low-pass lter (LPF) to ensure smooth music transitions.
Bi-amp design
Bi-amp speaker systems use separate power inputs for each component of the 2-way speaker system. This lets you drive
the speaker system with dedicated power for the High Pass (HP) and Low Pass (LP) channels instead of sharing the power.
Power handling
The XS-GS6921 speakers are rated for 100 Watts, 120 Watts RMS (CEA 2031 rated) and can handle peak power of 400
Watts.
Warranty
The GS series speakers come with a 3 year warranty.
XS-GS6921
GS Series 6x9" 2-way Speakers
Specications