Quick Start Guide

6Quick Start Guide APX 320X
4. LEDs
StatusStatus
Off
Off AP is off or reboot started
Green
Solid Normal operation
Flashing AP is booting & connecting to wireless controller
*
Amber
Solid AP has no connection to the wireless controller
Flashing AP is not claimed by wireless controller
Red
Solid Error, no wireless controller found. AP will
reboot (if not yet claimed by a controller). Check
network connection if error persists.
If reset button pressed: AP preparing configuration reset
Flashing slowly Configuration reset in progress
*
Flashing fast Firmware update in progress
*
Note: Do not disconnect from power
RadioRadio
Green
Solid AP is operating in 2.4 and 5 GHz mode
Amber
Solid AP is operating in dual 5 GHz mode
Red
Solid AP is operating 1 Radio mode 2.4 GHz OR 5 GHz
MeshMesh
Off
Off No Mesh activated
Green
Solid Mesh activated
* Your AP should recover from this state after a maximum of 5 minutes.