Quick Start Guide

7 Quick Start Guide APX 320X

5. Access Point Reboot & Reset

Reboot with current image and conﬁguration

1. Press reset button

2. Release reset button

3. AP reboots (Status LED will go off, then will turn to solid green)

Reboot with current image and clear conﬁguration

1. Press and hold reset button

2. AP reboots (Status LED will go off and then switch to green brieﬂy)

3. Status LED will turn solid red for 5 sec. You can still cancel the conﬁguration clearance process by

releasing the reset button before the Status LED starts blinking

4. Status LED will blink red (conﬁguration will be cleared)

5. Release reset button

6. AP reboots with factory default settings

Reset

Button

Status

LED

Released

Pressed

Solid Solid Blinking

Reboot

5 Sec

Reboot clear conﬁg

Off

6. Support and Documentation

For more information and technical support, please visit www.sophos.com/en-us/support or contact

your local Sophos reseller.