Daim Ntawv Qhia Tus Neeg Siv

9Quick Start Guide XGS 2100/2300/3100/3300

ENGLISH

LEDs on each SFP connector

ACT/LNK Green Solid 1. The SFP connector is receiving power.

2. Good connection between the SFP port and hub.

Flashing The adapter is sending or receiving network data.

Off 1. The adapter and switch are not receiving power.

2. No connection between both ends of network.

3. Network drivers have not been loaded or do not function correctly.

LEDs on each SFP+ connector

ACT/LNK Green Solid 1. The SFP+ connector is receiving power.

2. Good connection between the SFP+ port and hub.

Flashing The adapter is sending or receiving network data.

Off 1. The adapter and switch are not receiving power.

2. No connection between both ends of network.

3. Network drivers have not been loaded or do not function correctly.

Speed Blue On If SFP+ connector is operating at 10,000 Mbps.

Amber On If SFP+ connector is operating at 1,000 Mbps.

Off Either the LED is not working or the SFP+ connector is operating at a speed below 1,000 Mbps.

8. Support and Documentation

For more information and technical support, please visit www.sophos.com/en-us/support or contact

your local Sophos reseller.

Check our Getting Started resources to ﬁnd out how you can get the most out of your purchase