User guide

Form 435 (05.13) ©SOR Inc.
1/4
PK Pipe Kits
Part Numbers 5010-001, 5010-002,
5010-013, 5010-030
General Instructions
Registered Quality System to ISO 9001
Design and specifications are subject to change without notice.
For latest revision, go to sorinc.com
Part No. 5010-001 Pipe Kit
For switch housings provided with mounting hubs. Attach switch housing to pipe stanchion
mounting bracket with hardware supplied as shown. Install bracket on pipe lengthwise or
crosswise as desired with hardware provided.
NOTE: If you suspect that a product is defective, contact the factory or the SOR
®
Representative
in your area for a return authorization number (RMA). This product should only be installed by
trained and competent personnel.
Parts List
(1) Universal pipe mounting
bracket
(2) 1/4-20 x 2 1/2” x 3 1/4”
U-bolts with flat washers
and hex nuts
(2) 1/4-20 x 1” bolts with flat
washers, lockwashers
and hex nuts
Drawing 0091447

Summary of content (4 pages)