User guide

2/4
Form 435 (05.13) ©SOR Inc.
Drawing 0091447
Part No. 5010-013 Pipe Kit
For 102 Differential Pressure Switches. Remove existing mounting bracket and screws.
Attach switch body to pipe stanchion mounting bracket with hardware supplied, as shown.
Install bracket on pipe lengthwise or crosswise as desired with hardware provided.
For Mini-Hermet Switches, switch housings without mounting
hubs and 805PT Electronic Pressure Transmitters.
Attach switch to pipe stanchion mounting bracket
with hardware supplied, as shown. Install bracket
on pipe lengthwise or crosswise as desired with
hardware provided.
Part No. 5010-002 Pipe Kit
Parts List
(1) Universal pipe mounting
bracket
(2) 1/4-20 x 2 1/2” x 3 1/4”
U-bolts with flat washers
and hex nuts
(2) 1/4-20 x 1” bolts with
flat washers
Parts List
(1) Universal pipe mounting bracket
(2) 1/4-20 x 2 1/2” x 3 1/4” U-bolts with flat washers
and hex nuts
(1) 1/4-20 x 2” x 2 1/2” U-bolt with flat washers, lock
washers and hex nuts