User's Manual

ManualsBrandsSORIN CRM ManualsElectronicsImplantable cardioverter defibrillator with RF wireless communication availability

Table Of Contents

1. General description
2. Indications
3. Contraindications
4. Warnings and precautions
- 4.1. Risks related to medical environment
- 4.2. Sterilization, storage and handling
- 4.3. Implantation and device programming
- 4.4. Lead evaluation and lead connection
- 4.5. Generator explant and disposal
5. Adverse events
- 5.1. Defender study
  - Table 1: Summary of European Clinical Complications
  - Table 2: Summary of European Clinical Complications
- 5.2. SafeR (AAI <> DDD) study
  - Table 1: Summary of Symphony safety data during study
6. Clinical studies
- 6.1. Defender study
- 6.2. SafeR (AAI <> DDD) study
  - Table 1: Summary of Symphony safety data during study
7. Patient selection and treatment
- 7.1. Individualization of treatment
- 7.2. Specific patient populations
8. Patient counselling information
9. Declaration of conformity
10. Physician guidelines
- 10.1. Physician training
- 10.2. Directions for use
- 10.3. Maintaining device quality
11. Patient information
12. How supplied
- 12.1. Sterility
- 12.2. Warranty and replacement policy
13. Device description
14. Implant procedure
- 14.1. Necessary equipment
- 14.2. Packaging
  - 14.2.1. Contents
- 14.3. Optional equipment
- 14.4. Before opening the package
- 14.5. Prior to implantation
- 14.6. Device placement
- 14.7. Choosing the type of lead
- 14.8. Shock configuration (+ -> -)
- 14.9. Measurement of thresholds at implant
- 14.10. Lead connection
- 14.11. Device implantation
- 14.12. Tests and programming
15. Special modes
- 15.1. Safety mode (nominal values)
- 15.2. Magnet mode
- 15.3. Response in the presence of disturbance
- 15.4. Detection characteristics in the presence of electromagnetic fields
- 15.5. Protection against short-circuits
16. Main functions
- 16.1. Automatic lead measurements
- 16.2. Atrial tachyarrhythmia management
- 16.3. Ventricular tachyarrhythmia management
- 16.4. Pacing
- 16.5. Sensing
- 16.6. Follow-up function
- 16.7. Remote Monitoring function
17. Patient follow-up
- 17.1. Follow-up recommendations
- 17.2. Holter Function
  - Stored Tachyarrythmia Episodes:
  - Therapy history
- 17.3. Recommended Replacement Time (RRT)
- 17.4. Explantation
- 17.5. Defibrillator identification
18. Physical characteristics
- 18.1. Materials used
19. Electrical characteristics
- 19.1. Table of delivered shock energy and voltage
- 19.2. Battery
- 19.3. Longevity
20. Programmable parameters
- 20.1. Antibradycardia pacing
- 20.2. Ventricular tachyarrhythmia detection
- 20.3. Ventricular tachyarrhythmia therapies
- 20.4. Remote alerts and warnings
21. Non programmable parameters
22. Limited warranty
23. Patents
24. Explanation of symbols

19. ELECTRICAL CHARACTERISTICS

Atrial input impedance 80 kilohms ± 30 %

Ventricular input impedance 80 kilohms ± 30 %

D.C. capacitance 149 µF ± 8 %

Capacitor reformation No reformation required

Rate limit 192 ppm ± 10 ppm

Pacing waveform

Defibrillation waveform

19.1. TABLE OF DELIVERED SHOCK ENERGY AND VOLTAGE

The relationship between stored energies, maximum voltages and delivered energies (at 37

°C, 50 ohm load) for the minimum, low, mean and maximum programmed energy values is

as follows:

Stored energy (J) 0.5 10 20 34 42

V1 (Volt) 71 332 471 617 686

V2 (Volt) 35 167 235 309 342

Delivered E: Phase 1 (J) 0.32 6.94 14.0 23.8 29.6

Delivered E: Phase 2 (J) 0.08 1.75 3.4 6.0 7.4

Delivered E: Total (J) 0.4 8.7 17.4 30 37

Tolerances are 12% for voltage (25% at 0.5 J) and 30% for energy.

19.2. BATTERY

Manufacturer Greatbatch

Type Quasar High Rate (QHR)

Model GB 3070

Number of batteries 1

SORIN – PLATINIUM DR – U460A