User Manual

ManualsBrandsSound Anchors ManualsAudio accessoriesADMID



SOUND ANCHORS LARGE ADJUSTABLE

MONITOR STAND INSTRUCTIONS

SOUNDANCHORSINCORPORATED

2823KIRBYCIRCLENE.unit110

PALMBAY,FLORIDA32905USA

Phone:(321)7241237Fax:(321)9140953

www.soundanchors.com

info@soundanchors.com

Summary of content (5 pages)

PAGE 1
SOUND ANCHORS LARGE ADJUSTABLE MONITOR STAND INSTRUCTIONS SOUND ANCHORS INCORPORATED 2823 KIRBY CIRCLE NE. unit 110 PALM BAY, FLORIDA 32905 USA Phone: (321) 724 1237 Fax: (321 )914 0953 www.soundanchors.com info@soundanchors.
PAGE 2
Thank you for selec ng Sound Anchor Large Adjustable monitor stands to support your studio monitors. We hope that you will find the stands to be an indispensable fixture in your recording studio. If you use these instruc ons as a guide when you assemble your Sound Anchor Large Adjustable Monitor Stands you will find assembly easy. Please check this inventory list against the drawing on the following page.
PAGE 3
PAGE 4
Assembling your uprights 1. Insert the end of one of the uprights into the rectangular opening in the top of the foot. 2. Use 2 each 7/16‐14 hex head cap screws with washers to fasten the upright to the foot. 3. Tighten the cap screws with a 5/8 inch wrench . 4. Repeat this opera on un l all of your uprights are assembled. Assembling your speaker support 1. Insert 1 each 5/16‐18 x 1/2 socket head cap screw into the end of each speaker support bar. 2.
PAGE 5
IMPORTANT!!!! HIGHLY RECOMEMDED MAKE CERTAIN THAT ALL SPIKES AND SCREWS ARE INSTALLED BEFORE FILLING BECAUSE THE FILLER WILL ESCAPE IF THEY ARE NOT If you are going to be filling your stands this is the me to do it. You may use any loose material to fill your stands (sand, pea gravel or ki y li er are commonly used). We like and have been ge ng the best results using medium grit silica or general purpose construc on sand .