User's Manual

Charging the HR-890 (3.7V rechargeable battery built-in)
1- Connect HR-890 with PC/Laptop/Mac or any 5V USB adaptor(not included) with the USB cable
included
2- Charging indicator light blinks in Red during charging, turns OFF after fully charged.
3- Unplug USB cable after fully charged.
Start the HR-890
1- After fully charged, hold the power button to turn on the speaker.
2- LED blinks in White and Red color alternatively.
3- HR-890 is in standby for pairing, with indication voice.
AUTO power-off and re-start
1- HR-890 goes to standby status for power-saving purpose if no work for 3 minutes
2- Press any one button located on top to wake up HR-890 from standby.
3- To manually turn off the speaker, use the on/off power switch
Paring HR-890with mobiles (Bluetooth enabled) and Tablets.
1- Please keep the speaker and mobile within 1 meter.
2- Turn on HR-890, white & red LED blinks quickly, the speaker is standby for pairing.
3- Start the Bluetooth function of mobile and search the Bluetooth devices, after searched, select
“HR-890” in the Bluetooth device list. As per of the pairing process, you may need to enter a
passkey (0000) depending on Bluetooth version of devices.
4- After successful pairing, select “HR-890” in the Bluetooth device list, and press “connect”
5- After successful connecting, LED changes to solid white.
Note:
1: If the pairing is not successful, turn off speaker firstly, and then re-pair again.
2: After successful pairing, paired devices will remember each other. Unless pairing information is
deleted, no need to pair when use next time.
3: If you want to pair the speaker with other devices, please disconnect with existing device firstly, and
then pair with the new device according to steps 1-6 mentioned above.
Paring HR-890 with iPhone, iPad
1- Please keep HR-890 and iPhone (iPad) in the range of 1 meter when pairing.
2- Turn on HR-890, LED blinks in Red and White color quickly, the unit is standby for pairing.
3- In iPhone (iPad) General > Bluetooth, tap on Bluetooth function, and search the Bluetooth
devices, tap HR-890 to connect it.
Paring HR-890 with PC or notebook
1- Please keep HR-890 and PC in the range of 1 meter when pairing.
2- Turn on HR-890, white & red LED blinks quickly, the unit is standby for pairing.
3- Run Bluetooth program of your system.
4- Please use “Search new device” function in the program.
5- Your system should find HR-890 on your dialog, then double click the icon to confirm the
program should show the connection has been made. As per of the pairing process, you may
need to enter a passkey (0000) depending on Bluetooth version of devices.
Pairing HR-890 with Mac OS X 10 or above
1- Please keep HR-890 and Mac in the range of 1 meter when pairing.
2- Turn on HR-890, white & red LED blinks quickly, the unit is standby for pairing.
3- Pair it with Mac – choose setup Bluetooth Device from the Bluetooth status menu in the menu
bar, and follow the onscreen instructions to pair with the speaker. If the Bluetooth status menu
is not available, open Bluetooth Preference and select the “Show Bluetooth status in the menu