User's Manual

bar” checkbox. As per of the pairing process, you may need to enter a passkey (0000)
depending on Bluetooth version of devices.
4- Open System Preferences and click Sound.
5- Click Output and select the Bluetooth speaker.
6- Click Input and select your speaker. Adjust the Input and Output volume.
Note: Some applications, including iChat AV, allow you to select the audio device from within the
application (independently of the default audio input and output selected on the Sound pane of
System Preferences). To use a Bluetooth speaker with iChat AV, select the Bluetooth speaker for
audio input and output on the Video pane of iChat preferences.
Re-connecting to a paired device
Every time HR-890 is turned on, it has one of 2 conditions as below
1- Connect to last connected devices automatically, then just start music playback.
2- Belisted in the screen of devices as a output channel, then please select HR-890 as output
channel and play music.
Hand- free when have a coming call
1- Short press “Hand-free”to answer phone call.
2- Short press again to end a call.
LED light set
1- The LED light will show below colors when HR-890 is turned on
A: Red and White blinks – standby for pairing.
B: Solid White – successfully paired
C: Solid Green light – in AUX mode
D: OFF – LED is turn off manually
2- Press “LED light set” button, LED will blink in different colors according to Music rhythm.
3- Press again, LED will go to “breathing” mode to change colors (white, purple, red) slowly.
4- When HR-890 is turn off, hold “LED light set” button to turn on the light only, press again to
change color, hold again to turn off the light.
Volume control
1- Control volume via the Bluetooth device itself.
2- Control volume via the volume +/- buttons located on top of HR-890.
AUX port
1- You can connect AUX port to any music devices via the AUX cable included.
2- Then play music through the devices connected.
FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.