User Guide

Charge the speaker before use.
1. Connect speaker with PC/Laptop/Mac, 5V USB adapter or QC 2.0
or QC3.0 power adapter by the TYPE-C cable included. (power
adapter NOT included)
2. Red LED turns ON during charging, turns OFF after fully charged.
3. Unplug USB cable after fully charged.
4. Red LED twinkles when low power (<21%), with awarning sound.

Compatibility
Bluetooth is compatible with Bluetooth enabled devices.
Wireless Charge function is compatible with QI enabled
smart-phones and devices.
Notes:
1.TWS is workable only when you have 2 SC-830 speakers.
2. If you want to disconnect existing TWS connection, double click
“Power” button of either speaker, the sub-speaker will disconnect,
the host speaker will keep playing music.
3. If you want to establish TWS connection with 2
nd
speaker after
your device connected with one speaker already, please long
press “Power” button to disconnect from your existing paired
device, then follow above steps 1-3.
Power button(power/play/pause)function
1. Hold the button for approx. 2 seconds to turn on or turn
off the device, you would hear a starting chime.
2. When speakers in TWS (True Wireless Stereo) mode, hold
the button on either of the speakers to switch them off.
3.Short click the button , it would play or pause the music
4. Double click power button to disconnect current Bluetooth
pairing.
Left arrow <
Short press to decrease volume.
Long press to go back to previoussong.
Right arrow >
Short press to increase volume.
Long press to go to next song.

Bluetooth pairing
1. Turn on the speaker to be ready for pairing. After 1-2seconds you
would heara chimed Bluetooth sound.
2. Activate the Bluetooth function on your mobile phone or any
Bluetooth devices, search the speaker and select the name
“SC-830”,and connect the speaker with the device via Bluetooth
pairing
3. The Bluetooth sound is chimed once more after paired, with LED
turns on Blue color in front of speaker
Notes:
1. Keep the range of 1 meter when pairing. If the pairing was
not successful, turn off the speaker and re-pair again.
2. Paired devices will remember each other so there is no need
to pair again unless pairing information is deleted.
3. To pair with a new device, follow steps 1-3 above after
disconnected from existing device.

TWS (True Wireless Stereo): to pair one phone with 2 speakers
together
1. Make sure you have 2 SC-830 speakers at your hand, turn on both
speakers together, then quickly double click “Power” buttons of both
speakers, both speakers will into pairing mode to pair with each other
first.
2. Wait for around 5-10 seconds until two speakers “beep” once in
sequence, which means both speakers paired with each other
already. Host speaker will show flash Blue light whereas sub-speaker
will show solid Blue light.
3. Then, activate Bluetooth function of your device and pair with
Bluetooth name “SC-830”. You would enjoy music in True Wireless